Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Aerodrive SK3 - 2822-1740kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2822-1740kv Brushless Outrunner Motor

Prezzo:

Now save risparmia 0,00 € 0,00 €

20,36 €
Spedito da:
  • USA
  • Global
Già acquistato
Ora di arrivo prevista: Mid May 2024 [ ? ]
Stato:
Non disponibile!
SKU:
SK3-2822-1740
Spedizione gratuita? Clicca qui per saperne di più!

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 30T
Tensione: 2 ~ 3S Lipoly
RPM / V: 1740 kv
Resistenza interna: 0,125 Ohm
Max carico: 10A
Potenza massima: 115W
Shaft Dia: 3,0 millimetri
Fori dei bulloni di filmato: 16mm e 19 millimetri
Filo Bolt: M3
Peso: 32g
Motore spina: 3,5 millimetri Connettore pallottola

  • Kv ( rpm / v ) 1740.00
  • Correnti Max (A) 10.00
  • Resistenza ( mh ) 125.00
  • Max Tensione (V ) 11.00
  • Potenza ( W ) 115.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 24.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 22.00
  • Lunghezza totale E ( mm ) 33.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Flyerdude81 | Acquirente verificato

  • Overall
  • Quality
  • Value

Great little motor

Jul 19, 2021

I used to keep a stock of the 28 mm 1900kv motors on hand for small fast planes. When Turnigy stopped making them, I tried to find something similar, but was always disappointed. This is the nearest I have found so far. Seems to be a reasonable replacement.

Jean-Pierre | Acquirente verificato

  • Overall
  • Quality
  • Value

Great little motor

Jun 07, 2021

2s lipo and 20a esc and this motor as a pusher on a 80 cm wide delta : no problem at all !

I don't have one | Acquirente verificato

  • Overall
  • Quality
  • Value

Excellent running motors

Apr 27, 2021

The SK3 motors are great, always well balanced. I only one large
SK3 that did not balance and was replaced with one that did balance
out beautifully.

Mark | Acquirente verificato

  • Overall
  • Quality
  • Value

Good motor

Dec 22, 2019

Use on a 34" Dollar tree foamboard 3d airplane with 9X4.7 prop. Very smooth and quiet with good power. Almost 5 minutes on a Nano tech 460 2 cell lipo.

Mark | Acquirente verificato

  • Overall
  • Quality
  • Value

Good motor

Nov 25, 2019

Using on a 34" scratch built Dollar Tree foam 3D airplane. All up weight 10 ounces with 370 2 cell nano- tech battery and 9X 4.7 slow fly prop. Smooth running like all my SK3 motors with plenty of power for a flat foamy.

Al | Acquirente verificato

  • Overall
  • Quality
  • Value

Good so far

Nov 21, 2019

Seems fine so far

Steed | Acquirente verificato

  • Overall
  • Quality
  • Value

Good Motor

Jun 13, 2019

Good quality motor. Works well on 2S 10A ESC. for small RC. Not too sure about shaft and spinner\prop mount?

Bruce | Acquirente verificato

  • Overall
  • Quality
  • Value

Nice small motor with shaft protruding from fixed mounting

May 14, 2019

Nice motor besides shaft arrangement this motor only requires ten amps so small esc's can be used. it is the perfect motor for my specific application. Now if they can keep them in stock.

Ingo | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer rated

Jun 06, 2017

Very powerful little motors. I use them on a Multiplex Twin Jet ( 2 motors ) with 30A ESC; 2400mah 3S battery and 6x5,5 APC prop. A lot of pleasure . . .

Gunnar | Acquirente verificato

  • Overall
  • Quality
  • Value

The shaft broke very easily!

May 02, 2017

The shaft broke very easily! Need to use this with a prop saver.

  1. 1
  2. 2
File dei clienti
Drawing Download [86]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!