Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Prezzo:

Now save risparmia 9,88 € 9,88 €

Special Price 14,83 € 14,83 €

You save risparmia 9,88 € 9,88 €

Was  24,71 €

Quantità:
Spedito da:
  • USA
  • Global
  • EU
Già acquistato
Stato:
disponibile
SKU:
SK3-2826-1130
Spedizione gratuita? Clicca qui per saperne di più!

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 26T
Tensione: 2 ~ 3S Lipoly
RPM / V: 1130 kv
Resistenza interna: 0,120 Ohm
Max carico: 13A
Potenza massima: 125W
Shaft Dia: 3,0 millimetri
Fori dei bulloni di filmato: 16mm e 19 millimetri
Filo Bolt: M3
Peso: 44g
Motore spina: 3,5 millimetri Connettore pallottola

  • Kv ( rpm / v ) 1130.00
  • Correnti Max (A) 13.00
  • Resistenza ( mh ) 120.00
  • Max Tensione (V ) 11.00
  • Potenza ( W ) 125.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 28.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 26.00
  • Lunghezza totale E ( mm ) 40.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Bow | Acquirente verificato

  • Quality
  • Overall
  • Value

Excellent

Apr 29, 2021

Saw this Motor on an online site and it has been as good as they said

Gavin | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 01, 2014

Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.

ibillwilson | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Sep 30, 2013

These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.

Andr | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Sep 22, 2013

Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.

ad_wing | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 20, 2013

Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.

Yuvalko | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 09, 2013

Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.

Yeswecan | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Apr 30, 2013

Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.

winginman | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Apr 19, 2013

I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.

vaughan | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 19, 2013

Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!

gwcphoto | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 04, 2013

These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.

  1. 1
  2. 2
File dei clienti
Drawing Download [85]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!