- Descrizione
prodotto -
Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato. Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta. I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi. Specs.Turns: 12TVoltage: 3 ~ 4S LipolyRPM / V: resistenza 1000kvInternal: 0,031 OhmMax Caricamento: 45AMax Potenza: 670WShaft Dia: fori 5.0mmBolt: filetto 25mmBolt: M3Weight: 141gMotor Spina: 3.5mm pallottola connettore
- Product
Specifications -
Ulteriori informazioni
-
SKU:
SK3-3542-1000
-
Brand:
Turnigy
-
Peso (g)
249.00
-
Lunghezza
110.00
-
Larghezza:
45.00
-
Altezza:
80.00
-
Kv ( rpm / v )
1000.00
-
Correnti Max (A)
45.00
-
Potenza ( W ):
670.00
-
Lunghezza B ( mm ):
44.00
-
Can Lunghezza D ( mm )
22.00
-
Max Tensione (V )
15.00
-
Albero A ( mm ):
5.00
-
Unit Weight (g):
141
-
Diametro C ( mm )
38.00
-
Lunghezza totale E ( mm )
64.00
-
Resistenza ( mh ):
31.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
I had the opportunity to compare this motor to the SK3 new version 2 motor with reversed shaft with the same setup in the same plane. Yep 60A ESC, 13x6 APC Electricprop, Hobbyking EPP YAK 55M, 1,25m wingspan. This motor is the absolute looser versus the newer the Version 2 Motor with the exact same specifications. It has only 70pcnt Power and runs really not smooth and is also much louder than his V2 brother. I do not know why thismotor has such a lower performance, but the newer Version 2 of this motor is the absolute winner in all cases. I will only buy the SK3 Version2 Motors in the future, for almost the same price they ran awesome smooth and have a really good punch.Very good engine to power a glider-type HERON, weighing 1.7kg in FPV.
Propeller 12 * 6 with a 3700ma battery in 3s, it gives 38A.
And the model climbs at an angle of 80 .
1:00 flight.Arrived well packed and in great condition. This will be installed in a scale RC boat and there are no regrets with the choice. Fine looking product.Good Motor, Looks like very good Workmanship. Mounted in my Phoenix Rainbow (Trainer, 1,6m, 2.1kg
Power Data:
Multiplex Multicont 54A, Wellpower 2600-35C-3S, 12x6 APC-E, 43A, 8500 U/min
YEP-60A, Zippy 3000-25C-4S, 10x4 APC, 35A, 12200 U/min (prop can be bigger, but the power is enough for this plane)
Also measured, with Multiplex Multicont 54A, Wellpower 2600-35C-3S
Free Running, 2A, 12380 U/min
10x4 APC, 23A, 10200 U/min
11x5.5 APC-E, 32A, 9360 U/min
11x7 APC-E, 37A, 9200 U/min
Quality seems good. There is a lot of difference (dimensonal) with 800kv model.
Mine have 4mm shaft. Why? Spare part accessories has wrong collet (it is for 5mm shaft). Adpter with 3 hole is different from 800kv model. Why is there a lot of difference with 800kv model? I bought for change 800kv model from my sebart shark but I haveto do some work in the model for fit it (holes in the fire wall is not the same)used this motor in Extrem Flight LASER 48 EXP
With 13x6 prop and 2200mah battery
good power, enough for torque roll but keep your aircraft light...!
quality seems good
one problem, prop hub is not textured and will rip and turn when you try to tighten your prop bolt.Great motor on my edge 540t with 3 s 2700 mah 40c weight 1,2 kg
with 12x6 watt 327 31 ampere
with 13x6,5 watt 430 38 ampere
wot about 6/7 minutes of acrobatic flyGreat motor. This is my 3rd SK3 motor and they are all running perfectly. This is powering my Edge 540T EPP. WIth a 13x6.5 APC it is pulling 46A and putting out 475W. Plenty of power for the plane.Excellent engine
Lipo 4S :
11x6 folding propeller 50 A Number of tours per minute: 10400
10x6 folding propeller 34 A Number of tours per minute: 12450
Lipos 3S
11x6 folding propeller 33 A Number of tours per minute: 9000
I Run this motor on a Multiplex Mentor with a Plush 60 on 3S and have been very happy with it. She pulls 45 amps with a APC 13x6.5 and 44 amps with a 12x8. I like the 12x8 a little better. Gives me a bit more top end but still pulls nice. I get a little over 8 minutes on a 3300 pack flying mostly 1/2 to 2/3 throttle. - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
file di clientiSK3-3542(DT3019-14P) MOTOR (edited).pdf Scaricare ora [131.30Kb] SK3542-1000.JPG Scaricare ora [64.30Kb]
- acc
Combine
essential items and
