New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy AquaStar 200A Watercooled senza sensore ad alta tensione 6-12S (ESC)

Turnigy AquaStar 200A Watercooled senza sensore ad alta tensione 6-12S (ESC)

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

137,92 €
Stato:
Disponibile
SKU:
9192000112-0
WANT FREE SHIPPING? Click here to find out more!

La nuova Turnigy AquaStar 200A senza sensori ESC, ultra veloce controllato da microprocessore ed estremamente bassa progettazione di circuiti di resistenza e di chip, PCB a prova di acqua, e raffreddato ad acqua in alluminio dissipatore di calore per la dissipazione termica migliore. Queste sono solo alcune delle caratteristiche della nuova super cool gamma Turnigy Aquastar di regolatori di velocità barca brushless. La gamma di Aquastar ESC senza spazzola di sono un regolatore di velocità ad alte prestazioni in grado di uso regolare la concorrenza.

Impostazioni programmabili:
Reverse Tipo: blocco della retromarcia, solo in avanti, avanti / indietro *
Direzione del motore: * Normale, inverso
Numero Reverse: 25%, 50%, * 75%, 100%
Potenza di avviamento: bassa, normale *, alta
Cutoff Voltage: Lipo 3.0V per cella, NIMH il 40% di potenza fino tensione
Timing motore: bassa / normale / alto *

*Impostazione predefinita

Specifiche:
Tipo motore: brushless, solo motori sensorless
Tensione in ingresso: NIMH 15-33 cellulare, Lipo delle cellule 6-12s
Operazione corrente: 200A Cont, 250A picco
BEC: No BEC, separato BEC richiesto
Protezione termica: 95 ° C
Perso RX di protezione: Ritardo 0,5 secondi
Dimensioni: 115 x 50 x 31,5 millimetri
Peso: 290g

Nota: il software standard è adatto per motori a 2 poli. I clienti che utilizzano 4 poli o superiore devono utilizzare il firmware 4 poli impostato nella scheda file e impostare l'accelerazione a bassa.

  • SKU 9192000112-0
  • Brand AquaStar
  • Capacità ( mAh ) -
  • Peso 530.0000
  • Lunghezza 200.00
  • Packaging Width 65.00
  • Altezza 105.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hello i by an Turnigy AquaStar 200A Watercooled Sensorless ESC, and somebody can tell me which BEC i need ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello i by an Turnigy AquaStar 200A Watercooled Sensorless ESC, and somebody can tell me which BEC i need ?

I bought 2 speed controller 2 engines and a programmeringsbox
Programmeringsbox not working and the engine running only one way (to be able to run both) after about 20 seconds stops the motor, and can be started again after about 30 seconds. But only runds ca. 20 secounds

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 speed controller 2 engines and a programmeringsbox
Programmeringsbox not working and the engine running only one way (to be able to run both) after about 20 seconds stops the motor, and can be started again after about 30 seconds. But only runds ca. 20 secounds

i got the 200a esc and the big motor...great water flow...motor ran cool...esc went up in smoke in about 3 minutes....now gotta deal with shipping it back and warranty crap....if you can afford it...get something else

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i got the 200a esc and the big motor...great water flow...motor ran cool...esc went up in smoke in about 3 minutes....now gotta deal with shipping it back and warranty crap....if you can afford it...get something else

How do i find out if iv been sent the new program card and usb cable? iv had the 200amp esc for months 10/3/13 and only just got a motor, so iv tested it today 11/12/13 and the motor ran for three seconds. i also have a 180 and 120amp aquastar, they work very well and get my home made wooden riggers doing over 140kph and 110kph for more than 5 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

How do i find out if iv been sent the new program card and usb cable? iv had the 200amp esc for months 10/3/13 and only just got a motor, so iv tested it today 11/12/13 and the motor ran for three seconds. i also have a 180 and 120amp aquastar, they work very well and get my home made wooden riggers doing over 140kph and 110kph for more than 5 minutes.

Customer files
Update Instructions Download [216]
547753064X365809X55.pdf Download [216]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!