Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy B36-56-06 1800kv Inrunner

Generating Links

Turnigy B36-56-06 1800kv Inrunner

Prezzo:

Now save risparmia 0,00 € 0,00 €

19,17 €
Spedito da:
  • Global
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
B36-56-06-1800
Spedizione gratuita? Clicca qui per saperne di più!

TURNIGY brushless Inrunner

Spec.
Kv: 1800rpm / v
Potenza: 460W
Attiva: 6
Resistenza: 18
Corrente di riposo: 1.9
Esc: 60
Configurazione della batteria: 3-5s
Lunghezza: 57mm
Larghezza: 36 millimetri
Albero: 5mm
Peso: 260g

  • Kv ( rpm / v ) 1800.00
  • Correnti Max (A) 0.00
  • Resistenza ( mh ) 18.00
  • Max Tensione (V ) 19.00
  • Potenza ( W ) 460.00
  • Albero A ( mm ) 5.00
  • Lunghezza B ( mm ) 57.00
  • Diametro C ( mm ) 36.00
  • Can Lunghezza D ( mm ) 55.00
  • Lunghezza totale E ( mm ) 70.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Turnigy B36-56-06 1800kv Inrunner
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

4stripes | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2011

Used in my 90mm F/A-18 in a Freewing fan and added cooling fins (standard 36mm heat sink glued on with JB weld glue). Well over 50 flights on 6S high C rated batteries with no problems! Draws close to 1600watts and produces 2.2Kg thrust in the plane. It required no balancing at all. I can't believe this small motor can take over 75A without smoking or overheating! Great budget motor and 60g lighter than many 36mm inrunners.

snudo | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2011

hi,
I run this in a HET EDF 90mm on 7s 42.300rpm at 83A in a hobby topgun Bae Hawk static-trust are 2400gramm

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 16, 2011

moteur monte sur une turbine 90mm pour un mirage 2000, 100A hb kingplusturnigy 3600 5s.

trs bonne pousse et fiable sans oubli de refroidir aprs chaque vol..aplus

Tschesi | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 15, 2011

uerst starker Motor. Ist mit einem 80 mm Impeller in einer 1,50 meter Maschine eingebaut.

erdal | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2011

a complete disappointment.

I'm surprised who satisfied with this engine because I bought 3 pieces of this motor and they all burned.

2 engine burned on the first try.

I used this motor with 90 mm fan and 6 S lipo. It drew 60 amps full throttle.

windings of the motor contact with the rotor when motor is warmed.



Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 07, 2011

the coil separated from the can with less then 5 min of run time, 30 inch cat with m445 for prop on 4s lipo, should have been well within the limits for this motor, What happened with mine hobby king?

speedstar99 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2010

i run this motor in my savage flux stock gearing (20/44) with MMpro, 3s lipo & 5s lipo. For street run this motor ok. After third run on street, i test at sandy beach area, this motor failed after 15 minute, temperature only 62C not exceed 75C when fail. For the price, i will buy again to test with another gear setup.

speedstar99 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 08, 2010

i run this motor in my savage flux HP (stock gearing) with MMpro. Try it with 3s and 5s lipo. For street run this motor can survive. But try it on seaside sandy area this motor failed after 15 minutes only with 3s, when check the temperature only 62C not even exceed 75C. I give 3 star due front and rear motor plate have 4 hole and can catch dirt if offroad used. The motor shaft have to trim to give flat area to screw pinion gear. For the price i will buy another and try with another gear setup.

scorpion1 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 29, 2010

This motor is an absolute pig...........power out the wazoo! Perfect motor on 4s for a boat in the 25-30" range. These motors run cool as well..........im sure due to the vented endbells as well as the watercooling in a boat. Great motor 5 stars!

agorano | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 02, 2010

just the engine I'm using a very powerful MB339 ..... holds well 5s zippy

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!