Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati

Turnigy B6 PRO 50W 6A caricatore dell'equilibrio (nero)

Turnigy B6 PRO 50W 6A caricatore dell'equilibrio (nero)

Now save risparmia 5,13 € 5,13 €

Special Price 12,59 € 12,59 €

You save risparmia 5,13 € 5,13 €

Was  17,72 €

Non disponibile!
Stock:
OUT OF STOCK
Peso:
360 g
SKU:
9070000042-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Il Turnigy B6 PRO Pocket Charger è un multifunzionale, altamente portatile caricatore / scaricatore e bilanciatore per Li-xx, Ni-xx e Batterie al piombo acido.

Esso è dotato di caratteristiche che gli permettono di caricare e monitorare lo stato delle batterie.

La B6 Pro è in grado di caricare fino a 6 celle Lixx (1 ~ 15 Ni-xx) confeziona a 0.1 ~ 6.0 Ampere. Si caricherà da 0,1 a 6,0 Amp e questo caricabatterie in grado di memorizzare i dati per un massimo di 5 batterie nella sua memoria interna per la vostra convenienza.

È dotato di protezione contro le sovratensioni in ingresso in modo da non appiattire la batteria dell'auto al monitoraggio sul campo e la temperatura (sonda non in dotazione). Sarà inoltre responsabile di archiviazione confezioni per quando non sono in uso.

La B6 PRO può essere alimentato da una fonte di alimentazione adatta con prestazioni comprese tra 11 ~ 18V DC. È disponibile in una gamma di 4 colori vivaci per una facile localizzazione e l'identificazione.

Caratteristiche:
• Timer di sicurezza
• limite di capacità
• Controllo della temperatura
• monitoraggio della potenza in ingresso
• monitoraggio delle cellule individuali
memoria • 5 batterie
Display LCD retroilluminato • 2 Linea
• Costruito in Balancer per 6S pacchi
• ciclo di carica / scarica (non disponibile per le celle Li-xx)
• Include e programmi Li-xx "stoccaggio" "veloce"
• Facile da usare

Specifiche:
Uscita massima: 50W
Scarico massima: 5W
Bilanciamento corrente: 300mAh / cell
Tensione in ingresso: 10 ~ 18V DC
Ni-Cad / Ni-MH: 1 ~ 15 celle
Li-Ion / Li-Po / Li-Fe: Serie 1 ~ 6
Acid PB / Lead: 2 ~ 20V
Corrente di carica: 0.1 ~ 6.0A
Corrente di scarica: 0.1 ~ 1.0A
Connettori Balance: connettori JST-XH
Numero di cicli: fino a 5 cicli (non disponibile per le celle Li-xx)
Dimensioni: 137 x 74 x 26mm
Peso: 164g

include:
1 x Turnigy B6 Pro Pocket Charger
1 x XT60 connettore di ricarica di piombo
1 x XT60 adattatore clip Alligator
1 x ingresso Alligator clip lead
adattatore 1 x Glow / Futaba / JST
1 x istruzioni dettagliate


Alimentatore non incluso

Product
Specifications

Ulteriori informazioni

  • SKU:
    9070000042-0
  • Brand:
    Turnigy
  • Peso (g)
    360.00
  • Lunghezza
    160.00
  • Larghezza:
    30.00
  • Altezza:
    130.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Really cheap, and does everything you would expect from a 50W general charger. It even does IR measuring tough not really accurately. Generally good but it can get very hot (up to 85 Celsius) especially during discharging.
Quality
Value
Overall
Quality
Value
Overall
It's a great charger if you only want to charge up to 3.4amps, I've had it a few months now and it was great for charging my 1500mw 4s. but then I got a parallel charger so was trying to charge 6000mw at once (6 amps) but the max it will do is 3.4 amps, this makes the charging really slow. very disappointed.
Quality
Value
Overall
Quality
Value
Overall
..................................................................................................................................................................................................................................................................
Quality
Value
Overall
Quality
Value
Overall
Cheap 50W charger, good for small batteries. can charge 6S at about 2.1A.



it is very quiet cos it has no fan, but gets warm too. it has also internal resistance measure program, the rest is same as any other 50w charger
Quality
Value
Overall
Quality
Value
Overall
Amazing charger for all beginner pilots. Chargers lipos fast but the only down side is the discharging of batteries but if you fly till storage voltage its fine.
Quality
Value
Overall
Quality
Value
Overall
Great charger especially for the price. it charges my 3s 2200mAh in a little over 45 mins.
Quality
Value
Overall
Quality
Value
Overall
It arrived yesterday, it has the same menu as all the other similar chargers, it has an aluminium backing plate, I assume it's for heat dissipation, seems to be working fine, I will report back after I put a few battery's through it, for au$14 I don't think I'll be complaining *-)
Quality
Value
Overall
Quality
Value
Overall
i bought 9070000042-0 (black) and have some problems:

1.) storage mode is set at 3.7V per cell ... but recommended is 3.85V
2.) discharge mode is set at 3.0V per cell ... little too low
3.)no calibration menu ... why??

no firmware update from HobbyKing, only return
Quality
Value
Overall
Quality
Value
Overall
I bought this charger so I could charge a 2S 180mAh Lipo at 1C charge rate, but it is a suitable replacement for my other charger. Not many can charge at less than 1A, but this one can charge at 0.1A. A large aluminum heat sink is on the backside of the case. Charging voltages were measured to be very accurate (only 4S was tested). The provided manual is well written in English, but the author doesn't fully understand the subject (several mistakes were found in the programming diagram). Mine was improperly manufactured such that the balance port couldn't accept balance connectors with balance plug savers installed. From looking at all the photos, it appears that they all improperly manufactured that way. I was able to repair mine for balance savers with some partial de-soldering and re-soldering. The DC connector takes a 5.5mm x 2.5mm plug. An AC adapter from an IBM Thinkpad (part #92P1017, 16VDC/ 4.5A/72W) with 5.5mmx2.5mm plug is well suited for this charger and can be found new/used for about $6USD delivered on a popular Auction web site. For the low price, this charger/discharger is hard to beat.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.