New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy essere trovato perso modello beeper

Turnigy essere trovato perso modello beeper

Shipped From:
  • Global

Now save risparmia 0,00 € 0,00 €

2,69 €
Alert me
Stato:
Non disponibile!
SKU:
9171000001
WANT FREE SHIPPING? Click here to find out more!

Questa unità Handy emetterà un segnale acustico ad alto volume se il ricevitore perde il segnale radio o quando la tensione del sistema di modelli di radio scende sotto 4V. Perfetto per testare gamma di ricevitori a terra e garantire che il sistema radio non è sceso a una tensione non sicuro prima di ogni volo.

Basta installare il si trova tra il ricevitore e qualsiasi servo nel vostro sistema radio. L'intervallo dei segnali acustici può anche essere regolato a proprio piacimento tramite il piatto trim.

A questo prezzo il trovare è un grande investimento per la sicurezza del vostro modello. Senza un Turnigy essere trovato si può essere perso!

Specifiche:
Dimensioni:
34x18x16mm
Tensione di funzionamento: 4 ~ 9 Volt (Tensione massima: 10.0V)
Peso: 7.2g

  • SKU 9171000001
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 15.0000
  • Lunghezza 90.00
  • Packaging Width 15.00
  • Altezza 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This little buddy saves me a lot of hours for searching when my model is down somewhere. Not a battery drain. Lightweight and cheap !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little buddy saves me a lot of hours for searching when my model is down somewhere. Not a battery drain. Lightweight and cheap !

This little buddy saves me a lot of hours for searching when my model is down somewhere. Not a battery drain. Lightweight and cheap !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little buddy saves me a lot of hours for searching when my model is down somewhere. Not a battery drain. Lightweight and cheap !

I have these and also the stand alone alarms that occupy a channel on their own. Theu work great and very happy .... BUT one aspect that ruins a great product. If your main power source gets disconnected in the crash or bad landing as so often happens - the alarm is just ballast and does not work. I am now looking for same units but a way to have a tiny power source for it so if main power gets cut - the alarm will have its own ... now that will make a good item brilliant.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have these and also the stand alone alarms that occupy a channel on their own. Theu work great and very happy .... BUT one aspect that ruins a great product. If your main power source gets disconnected in the crash or bad landing as so often happens - the alarm is just ballast and does not work. I am now looking for same units but a way to have a tiny power source for it so if main power gets cut - the alarm will have its own ... now that will make a good item brilliant.

great gadget. works fine with my orange Rx so no problems for all you young chaps, trouble with the high pitch alarm for a pensioner who is starting to get hard of hearing i can barely hear it! i shall just have to ask a younger mate to help me find my quad in the grass!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great gadget. works fine with my orange Rx so no problems for all you young chaps, trouble with the high pitch alarm for a pensioner who is starting to get hard of hearing i can barely hear it! i shall just have to ask a younger mate to help me find my quad in the grass!!!

Always wanted one of these, so ordered 2 in one of my orders only to find they don't work on 2.4gh radio systems!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Always wanted one of these, so ordered 2 in one of my orders only to find they don't work on 2.4gh radio systems!

Ne marche que si le rcepteur ne comporte pas de failsafe : le beep est dclench par une voie ne comportant pas (ou plus) de signal.
Bien sur, on peut parfois dsactiver le fail safe ... mais c'est certainement une trs mauvaise ide !
Mieux vaut utiliser le "discovery Buzzer", disponible ici aussi, qui fonctionne parfaitement mme avec un rcepteur en failsafe, pourvu que ce dernier ait t correctement configur.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ne marche que si le rcepteur ne comporte pas de failsafe : le beep est dclench par une voie ne comportant pas (ou plus) de signal.
Bien sur, on peut parfois dsactiver le fail safe ... mais c'est certainement une trs mauvaise ide !
Mieux vaut utiliser le "discovery Buzzer", disponible ici aussi, qui fonctionne parfaitement mme avec un rcepteur en failsafe, pourvu que ce dernier ait t correctement configur.

I ordered these at 99 cents each. (ordered 3). it took some times for me to figure out how to get it to work correctly with the CC3D board. but once I did i was very happy to have this feature. the volume of the beeper is a little weak for being out in the field. I would up daisy chaining 3 of them together for that added volume. Would be nice if they were just louder so I only need 1. overall a good buy. though I see the price has tripled. not sure what that's all about.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered these at 99 cents each. (ordered 3). it took some times for me to figure out how to get it to work correctly with the CC3D board. but once I did i was very happy to have this feature. the volume of the beeper is a little weak for being out in the field. I would up daisy chaining 3 of them together for that added volume. Would be nice if they were just louder so I only need 1. overall a good buy. though I see the price has tripled. not sure what that's all about.

i currently haven't been able to figure out how to work this and it hasn't been working for me, i bought this for my brand new teksumo but wish i could get it working

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i currently haven't been able to figure out how to work this and it hasn't been working for me, i bought this for my brand new teksumo but wish i could get it working

these work well in regular rc models, just set it up on a switch and your good. they however do not work with ppm quadcopter controllers. you willl have to remove the buzzer from the housing and solder power and ground to it to get it to work for that purpose

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these work well in regular rc models, just set it up on a switch and your good. they however do not work with ppm quadcopter controllers. you willl have to remove the buzzer from the housing and solder power and ground to it to get it to work for that purpose

Doesnt work with any Receivers. Did not work with my Graupner HOTT System. An no manual or hints for the installation! Very bad product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Doesnt work with any Receivers. Did not work with my Graupner HOTT System. An no manual or hints for the installation! Very bad product!

Customer files
Be Found Beeper Mod Download [2366]
Manual en español Download [0]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!