Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

TURNIGY Campana 2409 1600kv Outrunner

Generating Links

TURNIGY Campana 2409 1600kv Outrunner

Prezzo:

Now save risparmia 0,00 € 0,00 €

5,77 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
TR_2409_1600
Spedizione gratuita? Clicca qui per saperne di più!

Il motore campana TURNIGY appare e funziona esattamente la stessa della Towerpros, a 2/3 del costo!

Turnigy Campana 2409 1600Kv

Peso: 56g
Tensione: 10V (2 ~ 3 cellulare lipo pack)
Idle corrente: 0,9
Kv: 1600
Albero: diametro di 3mm
Max efficiente corrente: 15A
Carico massimo: 20A
Max Potenza di uscita: 180W
Suggerita Elica: 9x3.8 E- Elica

* Questo non è fatta dalla TowerPro.

  • Kv ( rpm / v ) 1600.00
  • Correnti Max (A) 20.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 10.00
  • Potenza ( W ) 180.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 37.00
  • Diametro C ( mm ) 31.00
  • Can Lunghezza D ( mm ) 12.00
  • Lunghezza totale E ( mm ) 64.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

ikahraman | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 19, 2011

Katalog bilgileri dahilinde kullanlabilir bir motor.

Foamflyer | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2011

With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.

hipertommy | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 24, 2011

nice motor good and economic

totovz | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2011

Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

Flip__3D | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 16, 2011

I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.

rog123 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2011

i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !

ottoha | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 12, 2011

als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !

Rooks | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2011

Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect

DavidB CZ | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2011

TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK

Sumeet | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 24, 2011

The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!