Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy CA80 160 kV Brushless Outrunner (50 ~ 80cc Eq)

Generating Links

Turnigy CA80 160 kV Brushless Outrunner (50 ~ 80cc Eq)

Prezzo:

Now save risparmia 0,00 € 0,00 €

161,73 €
Spedito da:
  • USA
  • Global
Già acquistato
Ora di arrivo prevista: Nessun Orario Di Arrivo Previsto [ ? ]
Stato:
Non disponibile!
SKU:
8080-10-160
Spedizione gratuita? Clicca qui per saperne di più!

Progettato come un 50 a 80cc sostituzione del motore a gas, questo motore è un bullone diretto per 17 ~ 30lb Sport, Scala e gli aerei in 3D.
Un motore perfetto dimensioni per il 3D volo fino a £ 20.
Il motore è molto ben costruito con i supporti forti, campana estremità e una concentrici doppi cuscinetti nella parte posteriore per supportare grandi eliche e può rotanti, in particolare durante il duro volo 3D.

Questo motore è molto ben progettato e di alta qualità.
La fabbrica può produrre solo un numero limitato di questi motori al mese a causa della maggiore tempo di bilanciamento e la lavorazione di un oggetto così grande.


Spec.
Modello: 80-80-10
Resistenza: 0.011ohm
ESC richiesto: 200A
Tensione in ingresso: 30 ~ 50V
Kv: 160 giri / V
Peso: 1545g
Albero: 8mm
Non Corrente di carico: 6.0A a 20V
Dimensioni: 152x133x81mm (tra cui il Monte)
Equivalente: 50-80cc Gas Engine

  • Kv ( rpm / v ) 160.00
  • Correnti Max (A) 0.00
  • Resistenza ( mh ) 11.00
  • Max Tensione (V ) 50.00
  • Potenza ( W ) 0.00
  • Albero A ( mm ) 8.00
  • Lunghezza B ( mm ) 133.00
  • Diametro C ( mm ) 81.00
  • Can Lunghezza D ( mm ) 70.00
  • Lunghezza totale E ( mm ) 152.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

That Electric Guy | Acquirente verificato

  • Overall
  • Quality
  • Value

Great motor

Nov 10, 2022

Flying a 44 pound Balsa USA DH-4 bi-plane. 6s x 2 for 12 cell operation. Good power, smooth runner, great motor.

Gasto | Acquirente verificato

  • Overall
  • Quality
  • Value

Alles gut

May 06, 2022

Sehr guter Motor 23x10 100A Für einen 9,4KG Flieger geht senkrecht ohne Ende :)

motorrrr | Acquirente verificato

  • Overall
  • Quality
  • Value

ca80

May 05, 2022

works great in a 92inch gilmore red lion, very happy with it

Marco | Acquirente verificato

  • Overall
  • Quality
  • Value

OK

Apr 07, 2022

The product is good and it was delivered quickly.
Unfortunately there is no manual and no recommendations about connections and requirement of the system to make it run properly.
I looked in internen and I didn´t find anything.
If you are not an expert in electronics, you are completele lost and left alone with your nice engine.
Product good but support and documentation is really zero

Boz1911 | Acquirente verificato

  • Overall
  • Quality
  • Value

Beast

Mar 31, 2022

Best of a motor, looking for a 50cc airframe to install it in.

Gagik | Acquirente verificato

  • Overall
  • Quality
  • Value

Good motor

Feb 17, 2022

Электродвигатель хороший, своих денег стоит. На х/х работает хорошо, ток при 40В - 5,5А. Но следует учесть, что статор 12 зубий, магнитов 14. Не многополюсный, как в описании - 20 полюсный. Hobbyking-у следует более тщательно относится к техническому описанию изделий.
The electric motor is good, worth the money. It works well without load, the current is 5.5A at 40V . But the stator has 12 teeth, 14 magnets. Not multi-pole, as in the description - 20-pole. Hobbyking should be more careful about the technical description of products.

Erhard | Acquirente verificato

  • Overall
  • Quality
  • Value

Kann nur empfehlen diesen Motor unter Vorbehalt zu Kaufen

Nov 30, 2021

Habe vor 11 Jahren den Motor geordert, dieser ist voll in Ordnung läuft immer noch. Habe einen zweiten bestellt und heute bekommen, die vier Schrauben zur Luftschraubenbefestigung sind nur in 4 mm Gewinde, viel zu klein .Der alte Motor hat
5mm Gewinde. die 4 mm sind ein Sicherheitsrisiko. Deshalb die schlechte Bewertung

Juanjo | Acquirente verificato

  • Overall
  • Quality
  • Value

Motor

Sep 12, 2021

Una bestia de motor a 12s 13'5 kg con una 23*10

Clement | Acquirente verificato

  • Overall
  • Quality
  • Value

a very pleasent engine

Dec 11, 2020

The price is fabulous and the power also ! With a better documentation the setup would be easier but the power delivered on a self designed towing plane 8,7 kg, 2m wing span .... it rises an 8 kg glider to en altitude of ower 400m in less than a minute ! Thank you HK !

push | Acquirente verificato

  • Overall
  • Quality
  • Value

Engine very powerfull

Nov 26, 2020

Engine runs on a 9 kg towing plane.... prop 23x12; ESC Yep 120; glider 8 kg 5 m! Very happy ; 60 sec.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
File dei clienti
New version Download [183]
Decathlon_1 Download [3]
27x12E with 12s10000 Tattu Download [4]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!