In fibra di carbonio Turnigy Main Blade 700 millimetri (1pair)
pale in fibra di carbonio simmetrico perfettamente rifiniti, equilibrati e molto rigida.Spec;
Lunghezza: 700 millimetri
Peso: 189g ogniGrip: 12mm
I use them in my Assault 700. There was no balancing needed - very good finished.
No vibrations!Blades arrived well packaged. Blade surface is fairly poor with some areas matt and uneven. I have now covered the blades with white sticky covering similar to Fablon. Balance was good and the blades perform well on a T-Rex 700. Be aware that the bolt holes are 4mm so I had to drill out and replace the brass sleeves for 5mm bolts. Overall good value but finishing could be better.Ich bin mit den Blttern zufrieden. Der Gewichtsunterschied war sehr marginal.Er war mit Klebern locker auszugleichen. Fr den Preis eigentlich der Hammer, zumal man die 4mm aufnahmen ohne Probleme vergrern kann . von mir 5 Kronen !!Im Ganzen sind es nur gute Rotorbltter.
Gewichtsdifferenz lag bei 9g.
I used these in a Trex 600 stretched to 700. Blades balanced fine but not perfect. These are very stiff blades and very strong but I received my with one blade wider 2.5mm than another. Not good enough for scale flying because it cause pitch tracking problem and vibration.I use them in the Assault 700 DFC with x2 1mm spacers. One of the spacers is filed down abit to make it fit. I have tried the RJX High quality Flybarless blades in comparison, and I've noticed that these turnigy blades are fairly good and stiff, but they are not flybarless blades so they don't have the weighted rod in the tips of the leading edge. Not as stable as the $60 but they are just as snappy, possibly more snappy than the RJX flybarless 690's. These blades don't sound very good at 1950 headspeed (they sound like glass fiber blades actually.) These blades make tick tocks sound like blade farts compared to the turnigy flybarless 690's. Worth every penny.kaliteli bir pervaneI have flown RJX FBL 690mm blades earlier. Those are 700mm and fir RJX FBL 50 head WITH plastic spacers. I love them. Sound is good, they are stiff and well balanced. For less than 30$ you will not find better blades.
Black blades are less visible than white ones in flight. No problem for me...
I bought 2 sets of those and do not regret. I recommend those blades.
I fly relatively low revs, sport with flips&rolls with my stretched T-Rex 600/700.I used these in a Trex 600 stretched to 700. Blades balanced fine out of the box, not perfect, but better than I expected. These are very stiff blades and very strong. They felt good in the air but have not flown 3D with them as my helicopter is set up for aerial photography spinning at around 1600 rpm.
These blades do NOT have a safety wire in them if that concerns you.It looks nice. but I don't have 700 size heli.