Turnigy D3536 / 5 1450KV Outrunner Motor Brushless

• Overall
• Quality
• Value

Just ok.

Nov 27, 2019

Have had one burn up on three cells which leaves me to believe the build quality is not as good as other motors out there.

• Overall
• Quality
• Value

Collet nut is off centered

Jul 23, 2019

Good motor but bring your own M8 collet nut because the one that comes with it is badly off center.

• Overall
• Quality
• Value

Turnigy D3536/5 1450KV Brushless Outrunner Motor

Oct 07, 2018

Wowzers!!! This bad boy took my stock Parkzone/Horizon Hobby T-28 (PKZ8275)
from "quick" to jet speed. Holy cow! I almost tore the wings off, no joke. The stock motor is rated at ~950kv and this one jumps it up to 1450kv. This was JUST what I was looking for. The right motor at the right price. I did buy a new 60A ESC too. Plug everything together, re-drilled 4 holes on the motor mount, put the cowl back on and this plane F L I E S !!! A rocket, just badazz!

• Overall
• Quality
• Value

Excellent value

Nov 24, 2016

I've had this motor for about a month now and I threw it on a Hobbico Superstar EP, with a 40 amp esc, and a 9x6 prop. Let me tell you this motor ROCKS it is super fast and has been machined by a CNC machine I can tell because you can see the marks on the metal. I run a 3s on it and I would say it hits some where around 60 mph.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 29, 2016

Great motor, great price. Use with 3s and a 12x6 prop or 4s and a 10x6 prop for great performance

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 06, 2016

I use this motor in MPX dogfighter with 9*6 folding prop. The speed of the plane is about 120 km/h. Use with HK 50 A ESC (green). AUW 860 g, flight time: minimum 15 minutes!

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 30, 2015

Sehr guter Motor passt perfekt im Skipper XL

• Overall
• Quality
• Value

Customer Rated

Nov 28, 2015

Quality of motors looks good.
But motor did not start , found all 3 soldering to cold-connectors of very poor quality .
After resoldering , motor runs fine.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 10, 2015

Great motor for upgrade to many different 1100 mm wingspan planes. Make sure you also upgrade the ESC...

• Overall
• Quality
• Value

Customer Rated

Sep 03, 2015

I put two of these in a sky mule and wow POWER is all I can say this thing will match my 60" 3d plane in a clime well I think I didn't actually check but it has unlimited vertical till its out of sight in very little time not actually out of sight but a very small speck of a plane. They came down a little warm I don't know how warm I didn't have a thermostat with me but it wasn't bad on stock propellers. Basicly they are like most brushless motor that i've used before.