New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Dlux 120A HV Speed ​​Controller Brushless (opto)

Turnigy Dlux 120A HV Speed ​​Controller Brushless (opto)

Discontinued Product

Please continue searching for a similar product.
SKU:
TGY_DEL120HV
WANT FREE SHIPPING? Click here to find out more!

Turnigy® Dlux CES hanno stabilito un nuovo punto di riferimento in termini di qualità e prestazioni. Ogni ESC utilizza un design PCB doppia separare l'alimentazione del motore e MCU. Questo design permette per la disposizione ottimale dei componenti su ogni PCB e fornisce la configurazione ideale per la dissipazione del calore ed efficienza termica. Entrambi i PCB sono racchiusi in un involucro di alluminio intero dissipatore di calore per garantire massima dispersione del calore. Tutti i CES Turnigy Dlux possono essere programmati tramite una scheda di programmazione o con il trasmettitore. Chiaro e facile da capire le istruzioni sono incluse.

Spec.
Max Cont corrente: 120A
Max Burst corrente: 140A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Peso: 129grams
RPM Max (2 poli): 200,000rpm
Dimensioni: 60 x 33 x 23mm
Motore Plug: 4mm femminile proiettile connettore
Batteria Spina: Nil
Caratteristiche: Spark Eliminator piombo con Plug 2 millimetri

Caratteristiche.
Estremamente bassa resistenza interna
temperatura di funzionamento molto bassa
Sopra protezione di temperatura
APEC MOSFET (Taiwain)

Opzioni di programmazione.
Tipo di batteria: 6S ~ 12S
Avanti / indietro
soft Start
LV Tagliare Tipo (Ignora, ridurre la potenza, arresto del motore)
LV Tagliare impostazione (2,5 ~ 3,5 V con incrementi di 0,1 V)
Timing (Auto, molto basso, basso, normale, alto, molto Hgh)
Switching (8,16kHz)
fabbrica di ripristino
Controllo RPM Attivo: On / Off (modalità Governatore)

Impostazioni predefinite.
Freno: off
Batteria: LiPo Rilevamento automatico
Bassa Tensione: 3.2V (spegnimento del motore)
Timing: Auto
Frequenza: 8KHz

Nota: scatola di programmazione ora disponibile, controllare gli elementi correlati qui sotto.

  • SKU TGY_DEL120HV
  • Brand DLUX
  • Capacità ( mAh ) -
  • Peso 165.0000
  • Lunghezza 140.00
  • Packaging Width 25.00
  • Altezza 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I purchased this ESC a few months ago and I am very pleased with it. I have it in my giant scale Bud Nosen Citabria. I am running a Turnigy 1.60 motor and 10 cell lipo set up in it and I have more power than I need to fly the plane. The ESC was easy to set up. I just set the throttle setting on the transmitter and use the factory defaults settings. The program card was not available at the Arkansas warehouse when I got the esc. It was only available at the international warehouse. I hope to get the Program card soon where I can use the data logging capabilities with it. I have looked several places to find a HV ESC that will run a 10 cell set up for less money and I have not found one yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this ESC a few months ago and I am very pleased with it. I have it in my giant scale Bud Nosen Citabria. I am running a Turnigy 1.60 motor and 10 cell lipo set up in it and I have more power than I need to fly the plane. The ESC was easy to set up. I just set the throttle setting on the transmitter and use the factory defaults settings. The program card was not available at the Arkansas warehouse when I got the esc. It was only available at the international warehouse. I hope to get the Program card soon where I can use the data logging capabilities with it. I have looked several places to find a HV ESC that will run a 10 cell set up for less money and I have not found one yet.

I got this shipped to me here in USA, traveled with it to China to test fly a new plane we are in process of developing and the unit was DOA....I ended up using the ZTW ESC that I had also got in spare. Glad I did because it would have killed the trip. I got this ESC for the datalogging feature for our test flying review of parameters and data review of the flight....Not this time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got this shipped to me here in USA, traveled with it to China to test fly a new plane we are in process of developing and the unit was DOA....I ended up using the ZTW ESC that I had also got in spare. Glad I did because it would have killed the trip. I got this ESC for the datalogging feature for our test flying review of parameters and data review of the flight....Not this time.

I used this on my assault 700, 12S setup, everything went ok for less than 10 flight but today, I was on the flying field and this ESC stop working on air, luckly I could manouver thanks to a good pitch curve and a great flight controller, I land safely from a 30 meters autorotation descend.
When I plugged again the battery it make a HUGE spark and even desoldered my EC5 connector, with 10AWG wire on it.

Really disappointing, it could be much worse.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used this on my assault 700, 12S setup, everything went ok for less than 10 flight but today, I was on the flying field and this ESC stop working on air, luckly I could manouver thanks to a good pitch curve and a great flight controller, I land safely from a 30 meters autorotation descend.
When I plugged again the battery it make a HUGE spark and even desoldered my EC5 connector, with 10AWG wire on it.

Really disappointing, it could be much worse.

Sorry guys... this doesn't work with Neu Motors... tried in an electric F3D model.. and got the dreaded timing grumble. Tried all timing & switching modes - no consistent startup/running. Not usable. Used the programming box to change settings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sorry guys... this doesn't work with Neu Motors... tried in an electric F3D model.. and got the dreaded timing grumble. Tried all timing & switching modes - no consistent startup/running. Not usable. Used the programming box to change settings.

Hi all, I have used DLux ESC, but the 120A seems less reliable than others. I used this 120A ESC @ 90A, under 8s, and it fried, after only 4 or 5 flights! Other members of my club had the same problem. I think that 120A is optimistic value. Since this event, I generously downgrades my ESC's. So, to this 90A, I chose a DLux 160A.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi all, I have used DLux ESC, but the 120A seems less reliable than others. I used this 120A ESC @ 90A, under 8s, and it fried, after only 4 or 5 flights! Other members of my club had the same problem. I think that 120A is optimistic value. Since this event, I generously downgrades my ESC's. So, to this 90A, I chose a DLux 160A.

Produit rpondant mon attente,c 'est du costaud,la qualit semble etre l avec fils en cuivre et non pas cette matiere insoudable se trouvant sur d'autres controleurs, ,prix imbattable pour ce 120A -HV- utiliser avec sa carte de programmation spcifique indispensable pour ne pas se prendre la tete et qui est d'une facilit deconcertante-merci HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Produit rpondant mon attente,c 'est du costaud,la qualit semble etre l avec fils en cuivre et non pas cette matiere insoudable se trouvant sur d'autres controleurs, ,prix imbattable pour ce 120A -HV- utiliser avec sa carte de programmation spcifique indispensable pour ne pas se prendre la tete et qui est d'une facilit deconcertante-merci HK

I'm using several Turnigy Dlux ESC's of different Amps. This is my first 120 Amp version. The first I've got didn't work out of the box. After sending a video to HK I received full refund and ordered a new one. The second one was ok and I'm running it on 10S 5000mAH on a Turnigy G160 motor with APC 19x12 prop, no problem what so ever! Turnigy programming box is recommanded.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using several Turnigy Dlux ESC's of different Amps. This is my first 120 Amp version. The first I've got didn't work out of the box. After sending a video to HK I received full refund and ordered a new one. The second one was ok and I'm running it on 10S 5000mAH on a Turnigy G160 motor with APC 19x12 prop, no problem what so ever! Turnigy programming box is recommanded.

Got this ESC for my HK mercury 90mm 8s fan. does the job very well! Thanks a lot HK!! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this ESC for my HK mercury 90mm 8s fan. does the job very well! Thanks a lot HK!! :)

bonjour pour moi set un produit tres ngative ne convient pas pour un 700 a vote risque pour duit dfectueux

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bonjour pour moi set un produit tres ngative ne convient pas pour un 700 a vote risque pour duit dfectueux

Good quality made esc made to last a good esc for a 90mm jet like a mb339 that's what i am putting it in?quality sealed unit and heat sink.like the quality and the design

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality made esc made to last a good esc for a 90mm jet like a mb339 that's what i am putting it in?quality sealed unit and heat sink.like the quality and the design

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Nick's Turnigy Dlux HV Programming Guide Download [192]
Nick's Turnigy dLux HV Programming Guide Download [192]
same as this esc Download [25]
Interpreting the beeps Download [7]
Sparkcontrol Download [83]
2017-02-06.jpg Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!