New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Dlux 30A SBEC Brushless Speed ​​Controller w / dati di registrazione (2S ~ 4s)

Turnigy Dlux 30A SBEC Brushless Speed ​​Controller w / dati di registrazione (2S ~ 4s)

Now save risparmia 0,00 € 0,00 €

21,26 €
Stato:
Non disponibile!
SKU:
9192000027
WANT FREE SHIPPING? Click here to find out more!

Turnigy® Dlux SBEC CES hanno stabilito un nuovo punto di riferimento in termini di qualità e prestazioni, tanto che questo ESC leggero e molto versatile in grado di gestire fino a 4s e + 10A scoppio corrente con la massima tranquillità. Le numerose funzioni di programmazione e di logging dei dati offrono anche una versatilità di applicazioni raramente visto in un CES di questa valutazione. Tutti i CES Turnigy Dlux possono essere programmati tramite una scheda di programmazione o con il trasmettitore. Chiaro e facile da capire le istruzioni sono incluse.

* Ora con la registrazione dei dati visualizzabili quando utilizzato con la scatola di programmazione Turnigy Dlux.

Parametri di visualizzazione di registrazione dei dati:
Temperatura massima
Ambiente Temperatura
Max corrente
corrente Min
Max Voltage
Tensione Min
Voltaggio nominale
spento Tensione
Motor Run Time
Accensione Tempo
Motore Pole Numero
RPM Max Motor
tempi di errore

Spec.
Max Cont. Corrente: 30A
Max Burst corrente: 40A
Max BEC corrente: 2A
BEC Tensione: 5.5v
LiPo: 2 ~ 4S
Peso: 23grams
RPM Max (2 poli): 200,000rpm
Dimensioni: 51 x 27 x 11 millimetri
Motore spina: 3.5mm Femmina proiettile connettore
Batteria Spina: Nil

Caratteristiche.
• Estremamente bassa resistenza interna
• temperatura di esercizio molto bassa
• Protezione da sovratemperatura
• APEC MOSFET (Taiwain)

Opzioni di programmazione.
Tipo di batteria: 2S ~ 4S
Avanti / indietro
soft Start
LV Tagliare Tipo (Ignora, ridurre la potenza, arresto del motore)
LV Tagliare impostazione (2,5 ~ 3,5 V con incrementi di 0,1 V)
Timing (Auto, medio, alto)
Switching (8,16kHz)
fabbrica di ripristino
Controllo RPM Attivo: On / Off (modalità Governatore)

Impostazioni predefinite.
Freno: off
Batteria: LiPo Rilevamento automatico
Bassa Tensione: 3.2V (spegnimento del motore)
Timing: Auto
Frequenza: 8KHz

Nota: scatola di programmazione ora disponibile, controllare gli elementi correlati qui sotto.

  • SKU 9192000027
  • Brand DLUX
  • Capacità ( mAh ) -
  • Peso 40.0000
  • Lunghezza 115.00
  • Packaging Width 10.00
  • Altezza 100.00
  • Delux 20A & 30A ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

very nice esc. works perfectly. I haven't used the logger. but, don't intend to..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice esc. works perfectly. I haven't used the logger. but, don't intend to..

This is a nice little esc. running a 2826 with an apc7x4 pusher on 3s. works perfectly. operates cool!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a nice little esc. running a 2826 with an apc7x4 pusher on 3s. works perfectly. operates cool!

Installed one into my Super Zoom XL. Setup is a SK3 3530-1100kv, 12x6 prop, 3S packs, DS929MGs on the ailerons and MG16s on the elevator and rudder. Orange 6-channel RX w/ satellite. Throttle response seemed laggy. I guess I missed the part in the description where the BEC is rated at 2A, because ~1 minute into the first flight the plane locked out and flew into the bush. Blinking rx lights indicated power loss. Oops! After repairs I swapped in a beat-up CC Thunderbird-36 and all has been well since.
BTW the datalogging features work... make sure you have the current version (v2.1 or greater) of the programming box, as the older boxes do NOT recognize this controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed one into my Super Zoom XL. Setup is a SK3 3530-1100kv, 12x6 prop, 3S packs, DS929MGs on the ailerons and MG16s on the elevator and rudder. Orange 6-channel RX w/ satellite. Throttle response seemed laggy. I guess I missed the part in the description where the BEC is rated at 2A, because ~1 minute into the first flight the plane locked out and flew into the bush. Blinking rx lights indicated power loss. Oops! After repairs I swapped in a beat-up CC Thunderbird-36 and all has been well since.
BTW the datalogging features work... make sure you have the current version (v2.1 or greater) of the programming box, as the older boxes do NOT recognize this controller.

Wonderful product and as long as you spend a little extra for the programming box, this thing is amazing! 23.5 grams all up weight after I soldered on some micro 2mm gold connectors on the input leads.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wonderful product and as long as you spend a little extra for the programming box, this thing is amazing! 23.5 grams all up weight after I soldered on some micro 2mm gold connectors on the input leads.

Using this esc in my funfighter bf109 because the original esc burnt out after 6 flights(20a) and it pulls 23a !!!

8 flights upto now and going strong

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this esc in my funfighter bf109 because the original esc burnt out after 6 flights(20a) and it pulls 23a !!!

8 flights upto now and going strong

This is the first ECS I have and it runs perfectly, I would recommend it.
But it is the first one iv used so I don't have anything to compare it to.
I put it in the Bixler 1.1 and with in the week iv had over 20 flights with it.
I got the dlux programming box and it is very easy to use even for a first one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the first ECS I have and it runs perfectly, I would recommend it.
But it is the first one iv used so I don't have anything to compare it to.
I put it in the Bixler 1.1 and with in the week iv had over 20 flights with it.
I got the dlux programming box and it is very easy to use even for a first one.

This ESC is amazing, I plugged it in the wrong way (more than once) and iv had no issues with it. As a real new guy to the hobby I dont have much to go on,. but with my experience in electronics the fact it survived such a stupid mistake then its got to be worth a go!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC is amazing, I plugged it in the wrong way (more than once) and iv had no issues with it. As a real new guy to the hobby I dont have much to go on,. but with my experience in electronics the fact it survived such a stupid mistake then its got to be worth a go!

The ESC is awesome, much lighter than my HK red brick one, though the heat has something to do with that. Now I just need to get me that program box to use the data logging feature

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The ESC is awesome, much lighter than my HK red brick one, though the heat has something to do with that. Now I just need to get me that program box to use the data logging feature

I got one and it survived an accidental brief reverse connection!!
One aspect which I am not too pleased with, is the fact that to gather the data you will need to disconnect the connection to the receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one and it survived an accidental brief reverse connection!!
One aspect which I am not too pleased with, is the fact that to gather the data you will need to disconnect the connection to the receiver.

Big build up for a dissappointment this speedie needs the new programing box doesn't work on old V 1.0 instructions not accurate for transmitter and program box setup, works well in aeroplane mode except for soft start,but in heli mode even at throttle 100pcnt you only get 35 to 40pcnt rpm from motor, soft start in heli mode very slow,. but top speed in heli mode not enough. data logging works well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Big build up for a dissappointment this speedie needs the new programing box doesn't work on old V 1.0 instructions not accurate for transmitter and program box setup, works well in aeroplane mode except for soft start,but in heli mode even at throttle 100pcnt you only get 35 to 40pcnt rpm from motor, soft start in heli mode very slow,. but top speed in heli mode not enough. data logging works well.

  1. 1
  2. 2
Customer files
No File Name Download [5098]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save