Turnigy e-drive 2826/06
Numero di celle: 4 x Li-Poly
RPM / V: 850
Max. corrente efficienza: 48 ~ 61 A (> 86%)
Corrente a vuoto: / 2,1 A
Capacità di corrente: 61A / 60s
Dimensioni: 30x26 mm
Diametro albero: 5 mm
Peso modello consigliato: 2000 ~ 3200 g
Prop consigliato senza riduttore: 12 "-13"
12x8Thin prop con 4S che dà la spinta 1800g.
Trainer: fino a 2800g
3D: fino a 1800g
Sport / Aero / Warbird: 2600g
Eq: .40 IC motore glow
Tutti i motori sono adattatore dell'elica, connettori e accessori di montaggio.
i bought 3 turnigy motors and they work just fine.Really good motor .. using rhino 4s 3700 and 12x6 APC style prop, my 2.2kg aerobatic model have plenty of power. with this setup i could get 2 flights of 7min each ...Precioso motor con unas prestaciones y un precio increible. Probado con una Li-PO 2200 4s2p dio un consumo de 45A y 520 W. Suficiente para subir una Super dimona 2400 sin problema. Muy recomendable.Looks like E-MAX motors but i don't really know if they are..I received a BL 2826/06 instead of 2826/07 better specs so i kept it!Hardware parts do not have the quality of first generation turnigy,though they seem to handle high rates of amperes like 50amper and they spin noiseless,give em 5stars as value for money.!I ordered this motor for the Hyperion P51 plane. A perfect replacement for the hyperion 3025 series. The shaft comes out of the opposite side of motor so is perfect for back mounting. A 5mm prop adaptor is supplied and shaft can be moved to the other end of the motor. Build quality is excellent but back mounting bracket is bigger than expected. It will be easy to cut this bracket smaller to fit on firewall. One possible issue is that I receiver a 2626/06 motor and I measured the RPM/V at 850 (not 950). This was great because I want to use this with a 4S battery. I have reported issue and hope that UH stock more in this range.This thing hauls my mx2 into the sky with unlimited vert. Works really well with turnigy 80a plush esc and rhino 20c 14v battery. Ok performance on 11v. Flying all with 13x6 prop.The recieved motor have a KV of 850 instead of 950KV, but although it is a very powerfull motor, I use the motor on a Mustang P51 plane wingspan 1300mm ( 1900 gr ) with a 12x6 prop, stationary consuming 35A, with 4S2P LiFePo cells, a small minus is that the hole in the nut of
the propholder is not centered