Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy HeliDrive SK3 Series Competition - 2839-2700kv (formato 450 Heli)

Generating Links

Turnigy HeliDrive SK3 Series Competition - 2839-2700kv (formato 450 Heli)

Prezzo:

Now save risparmia 0,00 € 0,00 €

21,42 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9192000094
Spedizione gratuita? Clicca qui per saperne di più!

I motori Turnigy SK3 serie di gara sono la più recente aggiunta alla nostra line-up del motore SK3 offrendo la migliore in assoluto di qualità, prestazioni ed efficienza per il modello a livello di concorrenza. Ogni motore SK3 Series Competition è accuratamente ispezionato e testato per garantire l'alta efficienza e prestazioni necessarie per soddisfare le esigenze di volo concorrenza.

I motori Turnigy HeliDrive SK3 serie di gara sono outrunners di alta qualità progettati specificamente per l'uso in modelli di elicotteri ad alte prestazioni di oggi.

Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare la qualità di molti produttori leader a motore sul mercato oggi.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless superiore qualità senza compromessi.


* Perfetta per HK450 / Trex 450 / Rave 450 / fascio E4 / Blade 450 o qualsiasi altro elicottero 450 dimensioni.


Specifiche.
Attiva: 13T Delta
Tensione: 4S Lipoly
RPM / V: 2700kv
Poli motore: 6
Resistenza interna: 0,029 Ohm
Max carico: 40A
Potenza massima: 550W
Diametro albero: 3,175 millimetri
Lunghezza del pozzo: 15,7 millimetri
Vite distanza di montaggio: 16mm (M3x4)
Peso: 80g
Motore spina: 3,5 millimetri Connettore pallottola

  • Kv ( rpm / v ) 2700.00
  • Correnti Max (A) 40.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 15.00
  • Potenza ( W ) 550.00
  • Albero A ( mm ) 3.18
  • Lunghezza B ( mm ) 39.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 39.00
  • Lunghezza totale E ( mm ) 54.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

ANGEL | Acquirente verificato

  • Overall
  • Quality
  • Value

Cuidado! Eje de 3.5 mm.

Nov 11, 2017

He recibido dos de éstos y los ejes son de 3.5 mm. (no de 3.175 como se especifica).
Tampoco traen los tornillos de sujeción a la bancada que lleva una medida diferente a la métrica.

Another rc pilot | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2014

I put this motor in a 450 that I'm doing a 480 stretch on, just a seV2 clone. I only have 325mm blades on it at the moment, running 4s with an 11 tooth pinion. The performance is great so far, punchouts are better without any bogging of the motor. everything comes down cool. I will be putting on 360mm blades soon as I receive them, and can't wait to see how it does. If I was sticking with 325's, I would probably up it to a 12t pinion, but even the 11t on 4s is alot better than a 3s setup. The only gripe so far is no flat spot for the pinion set screw. I tried at first to not grind a flat spot, but ended up auto rotating down after a few flights when the pinion slipped. A dremel tool fixed that quickly though. After seeing the performance, I think I'm gonna upgrade another one of my 450's to 4s, and try a 12t pinion on the 325mm blades. (For your first flight, I would recommend adding in some expo, as the extra headspeed made mine quite responsive and could have easily crashed on first flight)

aby312 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 16, 2014

great motor for 450 pro, i used a dremel to grind a flat spot on the shaft so i had something for the screw to grip on but apart from that just bolt it in and fly away

Adam | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2014

This is a small outrunner with good power for helicpters.. I have it installed in my micro cat 650mm speedboat on 4S Lihtium-Mangam 4000mah 15C. For this boat and a 38mm two blade prop too much. The motor gets very hot without watercooling and full throttle. I use again my Leopard Inrunner Motor on 3S 8000mah 15C Lithium-Mangam Battery.
For this money very good 6 pol outrunner.

andreas..k | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 17, 2014

Hochwertiger und sauber ausgelegter Motor, 40A sind Kurzzeitbetrieb, MF Wicklung ist soweit OK, Umwickeln auf Einzeldraht lohnt mit Sicherheit, als Regler habe ich YEP 40 und 60 ausprobiert- fr berwiegenden Vollgasbetrieb geht der kleine, fr Teillast ist der groe angemessen. Ich verende ihn im Direktantrieb mit Aeronaut 8x5,8x6,8x7 an 2s fr einen 1,5 m Softliner

Lex | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 14, 2013

I run this motor on a Mini Outboad unit on 3S with 33mm prop. Super performance, high torque. Performs the same as the stock 3000KV 2218 outrunner but with very moderate amp draw, between 25-30 amps. Original standard motor was 35-40 amps. Well build, no problem when it gets wet. With motormount cooling on the outboard it stay's absolutely cold. Wil certainly buy more!

Steve | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 06, 2013

Just put this motor on the e-razor 450 not really knowing what to expect because I am running 3S and 12t pinion. There is a reason this motor is rated 4-5S, it is HIGH PERFORMANCE.
I finally got this motor dialed in at 3S, I had to go low on the esc timing and cut the throttle curve down and it is working ok with plenty of power and speed more than the stock motor.
It was cutting out without reducing the throttle and timing and had crazy headspeed!
I am saving up for the 4S batteries, I can only imagine what this thing could do on 4 or 5S like it is suppose to have!
I feel like it was well worth the low price.

Arib Afirin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2013

Just manage to try out with my PA Quantum 45A Esc & 4S 25C LiPo.
Fly on 335mm Blade for about 1 minute of hover then i found that the motor was really hot. is there anything that i should know why this is happening?

Jarsan | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 05, 2013

A nice high-gloss finish. Produce power well with 45A YEP ESC in a 4S setup. I use it in my 450Pro V2.



Does not heat up too much even in a harder flying.



Cons: No flat spot in shaft for locking screw. Comes without mounting screws.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Related Tags