Turnigy L2205-1350 motore brushless (100w) (

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 20, 2016

Compact and powerful. Would be nice if it came with a prop adaptor though.

• Overall
• Quality
• Value

Customer Rated

Jan 28, 2015

Have not used it yet. However, the mounting plate hole locations does not match the hole locations on the motor. Not sure how I'm going to mount it yet.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 28, 2013

Great little motor. Plenty of power. Spinning a 5.5 x 4.5 prop. Got plenty of poke. Thanks alot HK.

• Overall
• Quality
• Value

Customer Rated

Oct 22, 2013

cant rate this motor, no prop fits,tryed diferent adapters with any success, motor description should include prop recomendation since normally avaliable props dont fit.To this point this motor has been useless to me,

• Overall
• Quality
• Value

Customer Rated

Oct 22, 2013

motor shaft is very rare 2,3mm, tryed many adapters and props but none fit, so completely useless to this pont
I wont recommend this motor for that reason

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 30, 2013

High quality motor, small and light but seems powerful, i have yet to test it, but the mount and female bullet connectors are provide, along with heat shrink tubes.

• Overall
• Quality
• Value

Certified Buyer Rated

May 15, 2013

ottimo questo motore ch io metter su un aereo in depron da quasi 350 gr

• Overall
• Quality
• Value

Certified Buyer Rated

May 11, 2013

Ik gebruik deze motor op de HK Reaktor (300gr.) met een 10A esc en 8x6 sf prop.

Met een 850mAh 3s nano-tech kan ik 8 tot 10 min. vliegen.

8x4 of 8x5 sf prop zou misschien nog beter zijn maar heb ik nog niet geprobeerd

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 06, 2013

Fr die Kohle erstaunlich gutes Erscheinungsbild. Power ist gut. Wer mehr erwartet kauft eh was anderes

• Overall
• Quality
• Value

Customer Rated

Feb 05, 2013

This is a nice motor if you use it properly it is more than adequate for many applications requiring up to 100W. I use this motor with various GWS DR props, from 6x3 2 and 3 blade on up to 8x4.5 on 3S 800 mah lipols, but I also use a 2.5 prop adapter with the socket slightly compressed and the motor threaded shaft section removed, so that it grabs better onto the base of the motor shaft, the props have to be drilled to 4mm hole to use with the prop adapter(i.e GWS 7x3.5 which btw yields 2.5A at 3S 850 mah lipo for 30 Watts of power.