Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy L3040A-480G motore brushless

Generating Links

Turnigy L3040A-480G motore brushless

Prezzo:

Now save risparmia 0,00 € 0,00 €

19,33 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
L3040A-480G
Spedizione gratuita? Clicca qui per saperne di più!
Turnigy L3040A-480G motore brushless

Specifiche tecniche:
Dimensioni: 38mm x 46 millimetri
Peso: 194g
Kv: 480rpm / V
Tensione: 22.2V (6s)
Potenza massima: 1000w
Max corrente: 52A
Corrente a vuoto: 0.8A
Diametro del pozzo: 5mm
Spinta: 2100G
ESC: 60A ~ 80A
 
  • Kv ( rpm / v ) 480.00
  • Correnti Max (A) 52.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 22.00
  • Potenza ( W ) 1000.00
  • Albero A ( mm ) 5.00
  • Lunghezza B ( mm ) 46.00
  • Diametro C ( mm ) 38.00
  • Can Lunghezza D ( mm ) 30.00
  • Lunghezza totale E ( mm ) 65.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

David | Acquirente verificato

  • Overall
  • Quality
  • Value

Great motor, but needs some improvements.

Dec 08, 2016

I have tested three of these motors over several years on 3.5 to 5 lb airplanes. It is an excellent motor in it's power output vs efficiency and weight. It has some slight cogging vibration and could use better bearings. Better yet tweek the cogging out, put better bearings in, balance it, include a mount and can end prop adapter. Charge an appropriate price increase, I'll pay it with that tweeked out. I just can't seem to find anything else that does the same job.

zedooo | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 25, 2013

Sick motor! I don't know why is it so cheap!

acrozic | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 25, 2013

Got the motor and tried it on several batteries with different loads.
Very low efficiency motor on 4S battery - 450W 4S 17x8 or 500W 4S 16x10. Gets worm and power drops slowly. also gets very worm on 6S 13x8 700W.
Expected better :(

acrozic | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Just got the motor.
4S 17x8 ~500W
5S 17x8 ~600W
6S 15x8 ~600W
The motor gets hot. I will try the first combination on my YAK54 ~1.8Kg and wingspan of 1.4m. hope it will last ...

Napstr | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 25, 2013

Wow a light weight powerhouse! Is a very light motor for the output and runs at high voltage so gains efficiency seems well balanced and smooth - just goes like stink.

bearcatcrazy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2012

static ground test : 31 Amps on 6S with 13x6.5 APCE, motor gets fairly warm after 1 minute but generates a lot of thrust ! Reversed the shaft because I did not trust the small C clip.
Flight report scheduled for tomorrow.

JaroEDF | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2012

Shaft is pretty soft, it bends pretty easy. Fortunately it is no problem to buy spare shaft in my local shop. Engine cannot handle 1000W, it overheat way too much. 800W is maximum for this motor on 6S.

Steve_B | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2012

A real powerhouse on 6 cells. Using a Xoar 15x8 in static test I get:
45A
1060W
8300RPM
Approx 9lb thrust

In flight peak power was 965W and current 41.6A.

i had reservations about all that thrust being transmitted only though the little c-clip that hold the shaft in, so i reversed the shaft and put a bolt on prop adapter on (motor has drilling for one) and used a retaining collar on the back.

Steve

ROCCO | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 21, 2012

ottimo motore ho provato con una 15 X 8 ho ottenuto un tiro di 3.3 kg

con circa 800 w

con una 14 x 7 ho ottenuto 2.8 kg e 700 w circa

necessita' pero' comperate a parte il mozzo e il supporto motore

nicola | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2012

Ottimo motore l'ho montato sia su un extra 300 della Kyoshio sia sul mio Yak 54 carbon zeta con regolatore Turnigy da 85 ampere spinge tanto che gli aerei vanno su a candela alla stessa velocit dell'orizzontale lo consiglio a tutti.

  1. 1
  2. 2
File dei clienti
Front view Download [654]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Related Tags