New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Lipo Bunker - Lipoly sicurezza Charge Box

Turnigy Lipo Bunker - Lipoly sicurezza Charge Box

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000068
WANT FREE SHIPPING? Click here to find out more!

Ci sono solo due volte una batteria può fallire, durante carica o scarica, e mentre non si può controllare ciò che accade nel vostro modello è possibile controllare ciò che accade durante la carica con la Turnigy Lipo Bunker.

Costruito da S304 acciaio inox certificata per resistere a temperature superiori a 800 gradi Celsius, il Turnigy lipo Bunker è un recinto di sicurezza a prova di proiettile destinato a contenere le fiamme e ridurre al minimo i danni agli oggetti circostanti in caso di guasto LiPoly. Il condotto garantirà calore, fiamme e gas espulso dalla batteria lipoly verrà scaricata in modo diretto e controllato.

Specifiche.
Materiale Cassa: Acciaio inossidabile S304 Certified
Dimensioni: 180mm x 90 mm ​​x 90 mm

  • SKU 9171000068
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 596.0000
  • Lunghezza 180.00
  • Packaging Width 20.00
  • Altezza 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It's a nice and sturdy box and I am sure it will survive any LiPo explosion. But it takes some time to assemble it because the production quality of the parts is not perfect. I guess this would have to be produced to 1/100mm accuracy to fit perfectly. Sometimes the hole alignment or size is just a tiny bit off and the screws drill into the sheet metal instead of the surrounding metal parts.
The metal pieces come with some protective plastic cover and it is important to remove this so that it can't burn.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a nice and sturdy box and I am sure it will survive any LiPo explosion. But it takes some time to assemble it because the production quality of the parts is not perfect. I guess this would have to be produced to 1/100mm accuracy to fit perfectly. Sometimes the hole alignment or size is just a tiny bit off and the screws drill into the sheet metal instead of the surrounding metal parts.
The metal pieces come with some protective plastic cover and it is important to remove this so that it can't burn.

This thing sounds good, but the quality of the fasteners is Chinese Crappo.
They aren't tapped all the way through, so the screws only go in 50pcnt of the fasteners. If you have skillz you can tap with the screws and some oil and a good sense of torque.

Good luck for those of you who are hacks.....the screws will strip the heads before they seat in the countersink.

A five minute Gopro video turned into 2 hours to put this POS together.

Buy American! (If you can find any).... :l

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This thing sounds good, but the quality of the fasteners is Chinese Crappo.
They aren't tapped all the way through, so the screws only go in 50pcnt of the fasteners. If you have skillz you can tap with the screws and some oil and a good sense of torque.

Good luck for those of you who are hacks.....the screws will strip the heads before they seat in the countersink.

A five minute Gopro video turned into 2 hours to put this POS together.

Buy American! (If you can find any).... :l

With no manual. I spend 1 hour building it. It was a problem with aluminum clamps. Hole in the clamp is too tight for the screw. Packaging could be better. I had 2 big scratches. Good quality stainless steel. Looks cool. I got 1 extra part .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

With no manual. I spend 1 hour building it. It was a problem with aluminum clamps. Hole in the clamp is too tight for the screw. Packaging could be better. I had 2 big scratches. Good quality stainless steel. Looks cool. I got 1 extra part .

I buyed it to fell a bit safer, while lipo charging. It is very easy to built and works good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I buyed it to fell a bit safer, while lipo charging. It is very easy to built and works good.

A very nice product that looks really good. Simple to assemble, and although the panel edges are a bit sharp, the problem disappears when the pieces are bolted together. My only criticism is that I was surprised that the unit had no bushing material to insulate the cable entry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very nice product that looks really good. Simple to assemble, and although the panel edges are a bit sharp, the problem disappears when the pieces are bolted together. My only criticism is that I was surprised that the unit had no bushing material to insulate the cable entry.

This is the most important tool on the rc world

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the most important tool on the rc world

!Warning. Only 4 out of the 6 Sides are fully sealed when assembled! Apart from the obviously Vented Square Endplate where the Changing Leads are supposed to enter. The opposite Square Endplate has a 0.1mm Gap around all 4 Sides where Flames/Gasses could possibly escape.!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

!Warning. Only 4 out of the 6 Sides are fully sealed when assembled! Apart from the obviously Vented Square Endplate where the Changing Leads are supposed to enter. The opposite Square Endplate has a 0.1mm Gap around all 4 Sides where Flames/Gasses could possibly escape.!

Nice safe box! thought and bring my peace while charging my lipos. Although it came with 1 missing little part, easy fix but not the same...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice safe box! thought and bring my peace while charging my lipos. Although it came with 1 missing little part, easy fix but not the same...

No instructions! Suggest you make three sides then screw in the two end pieces. Watch out for the very sharp edges (don't ask me how I know!).
I will test this (outside in a field and in a sand pit) using one of my old 6s batteries (ie i will puncture one of the cells and see how the box copes - I will be watching from a very safe distance - just need to work out how I can do this safely)
The overall and value rating are low due to having cut my hand handling this as I unpacked it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No instructions! Suggest you make three sides then screw in the two end pieces. Watch out for the very sharp edges (don't ask me how I know!).
I will test this (outside in a field and in a sand pit) using one of my old 6s batteries (ie i will puncture one of the cells and see how the box copes - I will be watching from a very safe distance - just need to work out how I can do this safely)
The overall and value rating are low due to having cut my hand handling this as I unpacked it

A must buy in terms of peace of mind IMO. Recently got back into racing 1/10 off-road 4WD after many years away from Nimh tech. Upgraded to Lipo and this was advised to me buy many racers/general people who run Lipo's. Quality of the item is very good, although no instructions, so a quick glance of the images on here sorts that out easy enough, but a small A5 sheet of paper with a diagram would have been nice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A must buy in terms of peace of mind IMO. Recently got back into racing 1/10 off-road 4WD after many years away from Nimh tech. Upgraded to Lipo and this was advised to me buy many racers/general people who run Lipo's. Quality of the item is very good, although no instructions, so a quick glance of the images on here sorts that out easy enough, but a small A5 sheet of paper with a diagram would have been nice.

  1. 1
  2. 2
  3. 3
Customer files
Manual - Turnigy Lipo Bunker Download [617]
Assembling the box Download [49]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!