Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Marine 180A BEC Regolatore impermeabile di velocità con raffreddamento ad acqua

Generating Links

Turnigy Marine 180A BEC Regolatore impermeabile di velocità con raffreddamento ad acqua

Prezzo:

Now save risparmia 0,00 € 0,00 €

104,56 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9020000034-0
Spedizione gratuita? Clicca qui per saperne di più!

I regolatori di velocità impermeabile Turnigy marini sono dotati delle più recenti tecnologie e sono lì tra alcuni dei migliori oggi sul mercato. Questi regolatori hanno raggiunto il livello massimo IP67 di protezione (Protezione ingresso), questo è lo standard che i dispositivi elettronici sono testati per. Il 6 sul grado di protezione IP significa che è "totalmente protetto contro la polvere", il 7 sul grado di protezione IP significa che è "protetto contro l'immersione tra 15 centimetri e 1 m.

I regolatori di velocità Turnigy marini sono dotati di un sistema di "Copper Bar Tecnologia Heat" raffreddamento ad acqua (esclusivamente brevettato) e bassissima resistenza interna MOSFET di. Ognuno è appositamente progettato software che offre eccellenti avviamento e prestazioni di accelerazione, hanno un consistenze di "punch" quando esce di giri quando usato in barche veloci. Un interruttore impermeabile on / off è montata in modo da poter collegare la batteria poi sigillare il portello, la radio può essere acceso quando si è pronti ad andare.

2 modalità di esecuzione possono essere selezionati, sia in avanti solo o in avanti e indietro. I regolatori di velocità sono anche più protezioni, come mostrato nella lista delle caratteristiche di seguito. La programmazione delle molte caratteristiche del regolatore di velocità è fatto facilmente utilizzando il trasmettitore.

Caratteristiche:
• Sistema di raffreddamento ad acqua brevettato
• Eccellente start-up e le prestazioni di accelerazione
• Borse di "punch" in accelerazione in uscita di curva
• Dotato di impermeabile interruttore on / off
• 2 modi correnti possono essere selezionati (avanti solo o in avanti e indietro)
• programmabili tramite il trasmettitore
• Modalità di programma: modalità di funzionamento, numero di cellule LiPoly, a bassa tensione di cut-off, i tempi
• Protezione da surriscaldamento
• Protezione di taglio di bassa tensione
• protezione contro la perdita di segnale

Specifiche:
Tensione in ingresso: 2 ~ 6 celle LiPoly (6 ~ 18 NiMh)
Corrente continua: 180A
Burst corrente: 1080A
Tipo BEC: Accensione con interruttore on / off
BEC uscita: 6V @ 5A
Connettori motore: 6mm
Piombo Servo: stile JR
Servo Lunghezza del cavo: 300mm
Tubature dell'acqua di raffreddamento: 3mm I / D ~ 5,4 millimetri O / D
Dimensioni: 72x48x36.6mm
Peso: 245g

Si prega di notare: Questo regolatore di velocità non viene fornito con un connettore della batteria.

  • Miss Geico 29,ESC180A Turnigy, moteur Dynamite2000kv,Lipo2x3s 5,5A, INDRE ET LOIRE VALLEY
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

CENDRO | Acquirente verificato

  • Overall
  • Quality
  • Value

Valeur sure

Apr 18, 2018

Fort, fiable ras ...

O. W. | Acquirente verificato

  • Overall
  • Quality
  • Value

Good, but only 2 caps on the wires?

Nov 28, 2017

First impression is good. But... The esc has only 2 caps on the powerleads? On the pictures it looks like there are more on it. I have not installed it in my boat yet so can't give a proper review so far. Anyone else tried the version with the 2 big caps on the leads yet?

Zooma | Acquirente verificato

  • Overall
  • Quality
  • Value

Looks Good.

Sep 13, 2017

My first impression when opening the box was that this is a very impressive looking bit of kit that comes with plenty of good reviews.
I bought this speedo for use in my Pursuit so it should be more than adequate and leave some "in reserve" that may be handy if I decide to upgrade the motor and/or cell count in the future.
The plugs that came on the motor that is fitted in the Pursuit were too small to fit those that are fitted to this speed controller but fortunately the speedo came with a spare set of 3 matching plugs (complete with colour coded heat shrink).
I removed the plugs from the motor and soldered-on the bigger ones - but then found that they did not fit into the speed controllers sockets!!!!
After about an hour of very careful sanding with fine emery cloth (and constant check fitting) I eventually had the plugs fitting smoothly (but tight) into the speed controllers sockets.
I now have everything fitted into my Pursuit and when connected up the speed controller worked immediately and the motor was turning in the correct direction - so all good so far.
The auto set-up was a surprise but I wanted to program the unit to make sure I had full throttle and to remove the reverse function.
So far the speed controller has refuse to accept any programming commands from the RadioLink transmitter so I will keep trying and maybe buy a programming card as I do want to get the best out of this speed controller and to make full use of its built-in functions.

peter | Acquirente verificato

  • Overall
  • Quality
  • Value

8 out of 10

Jun 14, 2017

Seems to be working well but shuts down over 120 amps with green light flashing, doesnt feel too hot. Maybe the 180 amp rating is a bit optimistic?

Johan | Acquirente verificato

  • Overall
  • Quality
  • Value

180

May 28, 2017

It is impossible to program this ecu with the transmitter, I can't enter the programming mode. When I run the boat it will only run for a couple of seconds before it shuts down and you have to go back to neutral position to start the engine again.

Rogier | Acquirente verificato

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Rogier | Acquirente verificato

  • Overall
  • Quality
  • Value

Marine 180A v3

May 10, 2017

I bought this ESC for my 820mm boat, it is very easy to install in the boat. (use super velcron) But to program it by using your transmitter a whole different ball game. I would def. recommend a programbox whit this ESC. Then you know for 100% sure your settings. I run it whit a 2200KV and it is like superfast. For the price their isn't any better for >800mm boats.

Daniel | Acquirente verificato

  • Overall
  • Quality
  • Value

excellent product

Dec 12, 2016

easy to configure without a programming card
100% waterproof
a must have upgrade for any fast boat
get one.......

boboday | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 21, 2016

one of the best ESC for marine RC boats

Robin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2016

This is the best ESC for boats over 800 mm. I have bought 5 because they are 100pcnt waterproof, tough, plenty of capacitors for long leads and have terrific punch. Don't hesitate - buy it.

  1. 1
  2. 2
File dei clienti
TGY Marine Manual Download [3044]
Firmware Download [472]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori