New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy MAX80W 7A ai polimeri di litio Caricabatteria

Turnigy MAX80W 7A ai polimeri di litio Caricabatteria

Discontinued Product

Please continue searching for a similar product.
Peso:
423 g
SKU:
T7A80W
WANT FREE SHIPPING? Click here to find out more!

Il Turnigy MAX80W è un aggiornamento di un caricatore di bilanciamento del livello di entrata e di scaricatore che può gestire fino a 6 celle e 7A.
Il pad di tocco di stile Turnigy MAX80W gestirà LiPo / LiFe fino a 6S e NiMH / NiCd fino a 15S e mostra la tensione singola cella durante la carica con aggiornamenti in tempo reale in tutto il ciclo di carica.

Caratteristiche;

controllata da microprocessore
sensibilità del Delta-picco (NiMH / NiCd)
Individual bilanciamento delle celle
Li-ion, LiPo e vita capaci
Ni-Cd e NiMH capaci
7A Max corrente di carica
la funzione Store, permette alla corrente l'immagazzinamento sicuro
funzione di limite di tempo
monitoraggio della tensione di ingresso. (Protegge le batterie di automobile al campo)
L'archiviazione dei dati (Conservare 5 confezioni in memoria)
Rodaggio della batteria e il ciclismo.

Spec.
Tensione di ingresso: 10 ~ 18V
CIRCUITO DI POTENZA: Max carica: 80W / Max di scarica: 5W
Carica Range: 0,1 ~ 7.0A
Scarico gamma attuale: .1 ~ 1.0A
celle Ni-MH / NiCd: 1 ~ 15
Li-ion / cellule Poly: 1 ~ 6
Pb tensione della batteria: 2 ~ 20V
Peso: 300g
Dimensioni: 135x100x40mm

Questo caricabatterie è dotato di una spina di carica JST-XH, che lo rende compatibile con Zippy, HXT, TURNIGY e le confezioni con un adattatore JST.

Nota: Alimentatore non incluso.

  • SKU T7A80W
  • Brand -
  • Capacità ( mAh ) -
  • Peso (g) 423.00
  • Lunghezza 169.00
  • Larghezza 43.00
  • Altezza 147.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Would have got 5 stars if it came with a power cord. Great charger though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Would have got 5 stars if it came with a power cord. Great charger though.

very good charger no problems at all !!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good charger no problems at all !!!!!!

This charger appears very good and works great. One feature not described above and not even on the manual is the capability to measure the internal resistance of the individual cell. This is a very useful function; I will check the accuracy of the measurement and post the results. Very happy for now: hope it lasts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This charger appears very good and works great. One feature not described above and not even on the manual is the capability to measure the internal resistance of the individual cell. This is a very useful function; I will check the accuracy of the measurement and post the results. Very happy for now: hope it lasts.

Already had 4 of these, no suprise, they work really well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Already had 4 of these, no suprise, they work really well.

DON'T BUY
This model does not have a calibration function. Don't get fooled by the file about calibration in the Files tab. It does not apply to this model (more likely to the Accucell6).
The measure is 0.15V off which means I cannot get a fully charged battery, and the storage voltage is not ideal.
DON'T BUY

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DON'T BUY
This model does not have a calibration function. Don't get fooled by the file about calibration in the Files tab. It does not apply to this model (more likely to the Accucell6).
The measure is 0.15V off which means I cannot get a fully charged battery, and the storage voltage is not ideal.
DON'T BUY

Good packing. Arrived in reasonable time. Good for batteries smaller than 3000mah. For fly small planes and small quad this charger is very ideal. It would be better if it was direct 230v. I recommed to pilots who fly planes like bixler and foam board place which use 2200 mah battery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good packing. Arrived in reasonable time. Good for batteries smaller than 3000mah. For fly small planes and small quad this charger is very ideal. It would be better if it was direct 230v. I recommed to pilots who fly planes like bixler and foam board place which use 2200 mah battery.

Efficace, comme les autres chargeurs. Les boutons semble inverss, mais cela ne gne pas la navigation dans les menus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Efficace, comme les autres chargeurs. Les boutons semble inverss, mais cela ne gne pas la navigation dans les menus

This charger is really great. I have had now problems with it yet. I don't know how it will hold up in the long term but it seems really high quality. this charger is also really good for the price. i can charge 3 3s 2200mah at one time still at a 1c rate which is helpful when i plan to go out and fly. I highly recommend this to anyone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This charger is really great. I have had now problems with it yet. I don't know how it will hold up in the long term but it seems really high quality. this charger is also really good for the price. i can charge 3 3s 2200mah at one time still at a 1c rate which is helpful when i plan to go out and fly. I highly recommend this to anyone.

Good Charger!! love it!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good Charger!! love it!!

I bought two Turnigy Max 80W 7 A . The new generation Turnigy Max 80 W 7A cant be calibrated any more. At the end of a 4 S 4500 mAh LiPo charge the actual cell voltage measured with my Fluke is 4.22, 4.24, 4.23, 4.26. In my view thats a little bit too high and I cant adjust it. The file How to calibrate is a costumer files and not supported by HK and the manufacturer. I use the chargers now for charging my transmitter and receiver NiMh batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought two Turnigy Max 80W 7 A . The new generation Turnigy Max 80 W 7A cant be calibrated any more. At the end of a 4 S 4500 mAh LiPo charge the actual cell voltage measured with my Fluke is 4.22, 4.24, 4.23, 4.26. In my view thats a little bit too high and I cant adjust it. The file How to calibrate is a costumer files and not supported by HK and the manufacturer. I use the chargers now for charging my transmitter and receiver NiMh batteries.

Customer files
Turnigy Max 80W Instruction Manual Download [1345]
manual Download [1345]
User manual Download [1345]
643231275x39484x3.pdf Download [1345]
117242329X249180X58.txt Download [1]
How to Calibrate Download [0]
Charger Download [1240]
How to Calibrate Download [0]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!