Turnigy MG958 Composizione digitale Metal Gear servo 15kg / 65g / 0.2sec
Sistema di controllo: + impulso di controllo larghezza 1520usec neutro
Impulso richiesto: picco 3-5V a picco onda quadra
Tensione di funzionamento: 4.8V
Temperatura di funzionamento: -20 ~ + 60 ° C
Velocità di funzionamento: 0.2sec / 60 gradi a vuoto
Stallo coppia @ 4.8V 166 oz / a. (12.0kg.cm)
Stallo coppia @ 6.0V: 200 oz / a. (15.0kg.cm)
Angolo di funzionamento: 45 gradi. un impulso lato viaggiare 400usec
Direzione: Contatore orario / impulso viaggia 1520-1900usec
Tipo motore: Motore Coreless
Azionamento del potenziometro: azionamento indiretto
Tipo cuscinetto: cuscinetto a sfere doppio
Tipo di ingranaggi: Tutti ingranaggi metallici
Connettore Lunghezza cavo: 12in
Dimensioni: 40.2 x 20.1 x 36.8mm
Peso: 2,24 once (65g)
Velocità ( Sec / 60deg )
Coppia ( kg) ( min . 0.01kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
( Mm ) F
I have been using this servo now for more than 2 years on my 1/8 onroad car on steering and found it very good the gears are durable because they are metal but first it was little bit noisy but more I used it the noise reduced I can asure that it has coreless motor 15 kg and it is faster than 0.20. I have branded servos that cost over 100 euros each and compared to this servo they have nothing special so I will recomend it.I bought 2 TGY-MG958 for a steering servo on my Losi 8 2.0 Brushless.
After about 4 hours, the first servo has blown and broke my receiver !!!
The second one , after only 2 hours, doesn't brake enaugh ...
I bought 5 of them and I binned two ,they were wobbling in neutral, they are rubbish.
Also Hobby king should get their act together customer help stinksI bought theses servo's, to see if they at least work Reasonably good.. I've put 1 in my Kyosoh UltimaSC, and 2 in my crawler..
So far I'm happy with the performance.. They seem more precise then the stock servo's.. At this price they seem like good value to meReceived my servo and was very happy with the product from the point of view, but with the maiden I lost my 50cc Porter plane cause of poor electronic quality and after I inspect the servo that cause the crash, I've realized that the IC's come lose just because of the gas motor vibration. The servos was installed with crommets and screws that come with the product. NOT HAPPY AT ALL!I love these servos, fast and strong, use five of them in my TZ 50 and it works great! Even with the Solid G mini gyro and KDS flymentor3D.a super servo very strong and good power centres well i am using this as a steering servo in my 1/8 scale buggy and does the job veryplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusI have 6 of these for sale brand new, in USA.
They are good servos, as posted by other reviewers on this site.
Purchased these about 3 months ago for my 100cc airplane, but I am now going with 7 volt servos. These servos go 4.8 to 6.0 volts.
I can be contacted at miklleenAThotmailDOTcomI've bought it a year ago, I plug in TT01ED but i use my kit for a rally in my backyard. and eventually died three days ago, hahhaa .. overall this is the best servo performance and best price for a highly capable servo thanks HK