New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Micro Quad V2 P & P ARF Include KK2.0 LCD Control Board Flight

Turnigy Micro Quad V2 P & P ARF Include KK2.0 LCD Control Board Flight

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000150
WANT FREE SHIPPING? Click here to find out more!

Questo piccolo ma brillantemente progettato P & P micro quad fa entrare in quadcopter Hobby-grade facile! Abbiamo fatto tutto il lavoro duro per voi scegliendo il sistema di alimentazione, l'installazione dei motori / CES, saldando tutte le connessioni e montaggio / impostare la scheda di controllo.


*** STOP Premere !! *** AGGIORNAMENTO: Questa è la nuova Turnigy Micro Quad V2 che ora include il nostro brillante scheda di controllo di volo KK2.0 LCD!

Questo quad è il vero affare, non un micro giocattolo-ish con motori spazzolato e conchiglie corpo cute. È dotato di un sistema di alimentazione brushless ad alte prestazioni e altamente capace, completamente programmabile Dipartimento Funzione Control Board KK2.0.

Con il Turnigy integrato PCB Plug and Play Micro Quad, è sufficiente aggiungere la tua 4CH trasmettitore / ricevitore, batteria LiPoly 500-900mAH 2S 7.4V, messa a punto la radio, completare il controllo pre-volo, montare le eliche e il vostro pronto a volare!

Aggiornato per includere il nostro sistema KK2.0 Flight Control:

Il sistema giroscopico originale KK è stato aggiornato per un incredibilmente sensibile a doppio circuito integrato a 3 assi giroscopio e singolo chip 3 sistema di assi dell'accelerometro rendendo questo il consiglio più stabile KK mai e consentendo l'aggiunta di una funzione di Auto-livello. Al centro del KK2.0 è un Atmel Mega324PA microcontroller 8-bit di AVR RISC-based con 32k di memoria. Un canali di uscita aggiuntivi 2 a motore sono stati aggiunti alla KK2.0 consentendo per un totale di 8 motori da controllare (Octocopter) per consentire di utilizzare questo sistema di controllo di volo in qualsiasi quad che si desidera!

Micro Quad Caratteristiche:
• Il design leggero
• sistema di alimentazione brushless ad alta efficienza pre-installato
• integrato making cornice PCB per un layout di cablaggio ordinato
• P & P di configurazione prendendo la congettura di scegliere i propri componenti
• scheda di controllo di volo LCD KK2.0

Incluso nella confezione:
1 x Turnigy integrata PCB Plug and Fly Micro Quad (motori / CES scheda / controllo KK2.0 pre-installato)
4 x Eliche (2CW & 2CCW)
4 x Servo prolunghe (per collegare il ricevitore alla scheda di controllo)

Elementi richiesti:
500-900mAh 2S 7.4V Lipoly Batteria
4 trasmettitore e il ricevitore del canale
Caricabatterie

Specifiche:
Larghezza: 250mm
Altezza: 85mm
Motore: 4 x Turnigy T1811-2900kv Brushless
ESC: 4 x Turnigy peluche 6A
Oggetti di scena: 4 x 5x3 pollici (2CW & 2CCW)
Control Board: Dipartimento Funzione KK Flight Control 2.0 LCD
Collegamento della batteria: JST

  • SKU 9171000150
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 500.0000
  • Lunghezza 235.00
  • Packaging Width 105.00
  • Altezza 230.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This quad is a fantastic starter quad for those wanting to get into hobby grade quads, however it can be difficult to get set up and figure out everything needed to get up and flying for someone just getting into the hobby. I wrote a post on everything needed to get this up and going and additional parts that are recommended for this quad here: http://the3dman.com/quadcopter-from-toy-to-hobby/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This quad is a fantastic starter quad for those wanting to get into hobby grade quads, however it can be difficult to get set up and figure out everything needed to get up and flying for someone just getting into the hobby. I wrote a post on everything needed to get this up and going and additional parts that are recommended for this quad here: http://the3dman.com/quadcopter-from-toy-to-hobby/

This quad can be a great performer for those wanting to get into the hobby on a budget. With a little care and a few modifications it is quite capable of becoming a great flying 3D capable quad. Firstly make sure you balance the props before fitting them as they all seem to be heavy on one blade. I used some clear tape on the back of the light blades until they balanced. Also the power lead that connects to the battery is far too thin and cannot handle the current whilst performing high throttle maneuvers. I would strongly recommend replacing the wire with thicker wire and making it as short as possible. Doing this mod has make my quads full throttle climb about 2-3 times faster and more accurate than with the original cable. Also update the firmware on the KK2 with the latest 1.6 version using a usb hasp interface.

With these changes you will have a great flying fast quad that is capable of 3D maneuvers. I use a Turnigy 1000mah 2C battery and get around 9 minutes flight time depending on flying style.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This quad can be a great performer for those wanting to get into the hobby on a budget. With a little care and a few modifications it is quite capable of becoming a great flying 3D capable quad. Firstly make sure you balance the props before fitting them as they all seem to be heavy on one blade. I used some clear tape on the back of the light blades until they balanced. Also the power lead that connects to the battery is far too thin and cannot handle the current whilst performing high throttle maneuvers. I would strongly recommend replacing the wire with thicker wire and making it as short as possible. Doing this mod has make my quads full throttle climb about 2-3 times faster and more accurate than with the original cable. Also update the firmware on the KK2 with the latest 1.6 version using a usb hasp interface.

With these changes you will have a great flying fast quad that is capable of 3D maneuvers. I use a Turnigy 1000mah 2C battery and get around 9 minutes flight time depending on flying style.

well, very good quad, flies well with shipped setting (KK2.0 v1.2). Propeller are hard to fit. Becomes quite fast with some tuning of P values.
I find the frame weak especially the wire whole near motor. I broke one arm here after 20 flights.
Motors and ESC are warm after flight. If you need a strong kit you should probably go for another frame.
Overall good quad IMHO.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

well, very good quad, flies well with shipped setting (KK2.0 v1.2). Propeller are hard to fit. Becomes quite fast with some tuning of P values.
I find the frame weak especially the wire whole near motor. I broke one arm here after 20 flights.
Motors and ESC are warm after flight. If you need a strong kit you should probably go for another frame.
Overall good quad IMHO.

Bought from UK warehouse with PF 48 hour shipping, arrived in 2 days as expected. Well packaged both by HK and the OEM. I got this as my first quad, moving on from using a PC simulator, to get some real experience with multi-rotors before considering a larger FPV capable model. After half a dozen minor crashes with no damage, I crashed in to a flag pole (what are the chances) and smashed it in to dozens of pieces. I epoxied it all back together and reinforced the arm joints with brass rods and lots of epoxy. 5 stars for value, it really is good, just add battery and rx.

Usually use 2S 850Mah ZIPPY compact batteries, which work well, although also use a 3S 850Mah ZIPPY compact, which while not supported does work and is noticeably more powerful.

3 stars for quality, because the way the motor mounts join the arms is really poorly thought out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought from UK warehouse with PF 48 hour shipping, arrived in 2 days as expected. Well packaged both by HK and the OEM. I got this as my first quad, moving on from using a PC simulator, to get some real experience with multi-rotors before considering a larger FPV capable model. After half a dozen minor crashes with no damage, I crashed in to a flag pole (what are the chances) and smashed it in to dozens of pieces. I epoxied it all back together and reinforced the arm joints with brass rods and lots of epoxy. 5 stars for value, it really is good, just add battery and rx.

Usually use 2S 850Mah ZIPPY compact batteries, which work well, although also use a 3S 850Mah ZIPPY compact, which while not supported does work and is noticeably more powerful.

3 stars for quality, because the way the motor mounts join the arms is really poorly thought out.

Great beginner quad and the right quad for "trying out" multirotor flying.

Simply add a battery and a receiver and you are up in the air. I'll even fly it with 35MHz, no problem :D

It's not very fast, but easy to fly and practice for your next bigger multiroto ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great beginner quad and the right quad for "trying out" multirotor flying.

Simply add a battery and a receiver and you are up in the air. I'll even fly it with 35MHz, no problem :D

It's not very fast, but easy to fly and practice for your next bigger multiroto ;)

Fine quadcopter to get started if you have a radio and receivers already, but the only catch is the frame is really quite fragile so not ideal to learn on unless you can fit some landing gear to absorb hard landing shocks. I cracked the frame within 20 minutes of flight time practicing in the garage, not even a super hard crash just dropping from 2-3 ft off the ground. But, I'm not too upset b/c I put all the electronics from this onto the 250mm nylon frame and it seems much more rugged and should withstand some errors and I'm learning to fly it so I still have a decent copter for well under $200.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fine quadcopter to get started if you have a radio and receivers already, but the only catch is the frame is really quite fragile so not ideal to learn on unless you can fit some landing gear to absorb hard landing shocks. I cracked the frame within 20 minutes of flight time practicing in the garage, not even a super hard crash just dropping from 2-3 ft off the ground. But, I'm not too upset b/c I put all the electronics from this onto the 250mm nylon frame and it seems much more rugged and should withstand some errors and I'm learning to fly it so I still have a decent copter for well under $200.

I bought this quad because of the KK2 board and to have a look into the more advanced settings of multicopters before I spend several hundred dollars on something. I have almost no previously experience with quadcopters, I have practised with WLToys V262 but this micro quad is much more difficult to use. I need more time on the sticks :-)

I broke the motor mount and now I need to buy a kit to repair it, first I will try to glue it. Not very durable, bu fun to fly.

Value = 4 -because of KK2 board, 4x $10 motors ESC's.

Quality = 3 -Breaks easily and you must replace the entire PCB board if you break a motor mount. Everything else looks good; KK2 board, motors etc.


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this quad because of the KK2 board and to have a look into the more advanced settings of multicopters before I spend several hundred dollars on something. I have almost no previously experience with quadcopters, I have practised with WLToys V262 but this micro quad is much more difficult to use. I need more time on the sticks :-)

I broke the motor mount and now I need to buy a kit to repair it, first I will try to glue it. Not very durable, bu fun to fly.

Value = 4 -because of KK2 board, 4x $10 motors ESC's.

Quality = 3 -Breaks easily and you must replace the entire PCB board if you break a motor mount. Everything else looks good; KK2 board, motors etc.


with this quad you won't be able to fly cause it drifts to a side when you take off the ground! the programming is really complicated.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

with this quad you won't be able to fly cause it drifts to a side when you take off the ground! the programming is really complicated.

with this quad you won't be able to fly cause it drifts to a side when you take off the ground! the programming is really complicated.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

with this quad you won't be able to fly cause it drifts to a side when you take off the ground! the programming is really complicated.

This is a fantastic little combo, straight out of the box plus 15 mins setting up and you're flying! Stock settings are flyable but some tweaks are needed. Had to increase the P and I a little bit to get it behaving how i like. Auto-level mode seems a little slow but that doesn't bother me much at the moment. The frame is stronger than expected and easily handles the weight. I'm using a 2S 1000 lipo and getting around 6-8 mins air time. For the price i'm happy. However 2 things could be better: 1, QC on the motors as when trying to install a prop i pushed the shaft through the motor. 2, 1 prop was badly balanced and the centre hole was not centred (lol). Easy fix for me but a beginner would find these little niggles a PITA! Why HK didn't include the propsaver mounts with this kit is beyond me.... they work! BTW if the UK people need a spare frame for whatever reason try the "Turnigy Integrated PCB Micro-Quad V2 (Black) (KIT) (UK Warehouse)" it's almost identical.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic little combo, straight out of the box plus 15 mins setting up and you're flying! Stock settings are flyable but some tweaks are needed. Had to increase the P and I a little bit to get it behaving how i like. Auto-level mode seems a little slow but that doesn't bother me much at the moment. The frame is stronger than expected and easily handles the weight. I'm using a 2S 1000 lipo and getting around 6-8 mins air time. For the price i'm happy. However 2 things could be better: 1, QC on the motors as when trying to install a prop i pushed the shaft through the motor. 2, 1 prop was badly balanced and the centre hole was not centred (lol). Easy fix for me but a beginner would find these little niggles a PITA! Why HK didn't include the propsaver mounts with this kit is beyond me.... they work! BTW if the UK people need a spare frame for whatever reason try the "Turnigy Integrated PCB Micro-Quad V2 (Black) (KIT) (UK Warehouse)" it's almost identical.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
A 5mn protect-3 Download [136]
A 5mn protect-2 Download [174]
A 5mn protect-1 Download [149]
Custom Foam Guard Download [413]
Microcopter_by_Night_1 Download [984]
Microcopter_by_Night_2 Download [1556]
Microcopter_by_Night_3 Download [703]
No File Name Download [108]
Aerial video with Turnigy Micro Quad V2 Download [986]
Microquad quick guide with ESC cal Download [1]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save