Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global

Turnigy Potenza Min Distributore (RED)

Turnigy Potenza Min Distributore (RED)

QTY:

Now save risparmia 0,00 € 0,00 €

40,35 €
Stock:
Peso:
164 g
SKU:
373000002

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Turnigy introdurre il distributore di potenza Min UBEC (RED) adatto ai modelli 30cc più alimentati a gas.

Questa unità ha grandi caratteristiche, tra cui: ingresso doppia batteria, 5v isolato lineari RX BEC, 8 canali di ingresso RX con doppia uscita su ogni canale - semplificare le superfici di controllo a doppio servo.

Grandi inclusioni sono il regolatore 5V lineare indipendente che fornisce una fonte di alimentazione separata per il ricevitore, otticamente isolate CDI potere e integrato uccidere accensione a distanza. fonti di alimentazione del ricevitore, servo e CDI sono completamente isolati gli uni dagli altri.

Tre opzioni di tensione di funzionamento selezionabili UBEC (tramite Jumper):

Collegamento diretto: utilizza l'ingresso 5V- 6V per l'alimentazione - Tensione passaggio da ingresso batteria al ricevitore
Caduta di tensione 0.5V: Riduce un ingresso 6v a 5.5V
Caduta di tensione 7805: uso di ingresso 7.2V- 8.4V per la fornitura di 6v potenza regolata


Questo è il primo sistema di alimentazione Distributore di sicuro nido ricevitore all'interno della distribuzione di energia 'block' accorciando in tal modo tratte di cavo, l'aggiunta di una protezione per il vostro tutto ricevitore importante e eccesso di velocità impostato tempo.

Caratteristiche:
• 5v RX regolabile BEC
• 30 Amp Servo
• 8 canali di ingresso (+1 CDI taglio)
• 16 canali di uscita
• LED di controllo 5 di stato
• vassoio ricevitore imbottito e Montaggio sicuro
• CDI alimentazione isolata
• CDI accensione a distanza (taglio a distanza)
• CDI spia di stato dell'alimentazione
• CDI terminale di uscita di potenza
• monitor di tensione CDI LED

Opzionale: visualizzazione della tensione di ingresso / uscita con interruttore di alimentazione esterna

Specifiche:
Canali di ingresso: 8
Canali di uscita: 16
Tensione in ingresso: 5-8.4V
Servo corrente: 30A (40Amp Burst)
Tensione Rx: 5-8.4V (regolabile dall'utente, di default è la tensione passare attraverso)
Temperatura di esercizio: da -20 a 85 gradi C
Peso: 80g
Dimensioni: 116mm x 88 millimetri x 13mm

Product
Specifications

Ulteriori informazioni

  • SKU:
    373000002
  • Brand:
    Turnigy
  • Peso (g)
    164.00
  • Lunghezza
    175.00
  • Larghezza:
    40.00
  • Altezza:
    145.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Just want to say the tabs for the grommits are a bit weak on the new plastic housing and one has so far broken of on my 55cc plane, so in that respect I prefer the older version.
Quality
Value
Overall
Quality
Value
Overall
WARNING! WARNING! WARNING!
The circuit diagram that comes with this product clearly shows 5v to servo's.
However upon using 2 X 3s lipo's for input voltage in became clear that the input battery voltage for main power is the same as the voltage that is outputted to servo's.
So if you use s3 11.1v for power this is the voltage that is output to the servo's
I found this out the hard way and ended up instantly burning out 5 X 70 Digital servo's
Total cost on burnt out servo's 350
The only 5v bec is to the receiver
Quality
Value
Overall
Quality
Value
Overall
Purchased in early May/2015 so I can assume this is the latest version. There are conflicting specs between posted and instruction sheet however to clarify there is no internal rx voltage regulator. What you put in for voltage is what you will supply to the rx. Not an issue for me as I already own a good quality 20 amp BEC to be used with a 2S LiPo as the power source.
The buses are rated at 20 amps in the documentation supplied with the unit.
The internal CDI circuit worked as advertised and is a nice bonus at this price point.
One very good feature is the on/off switch. The unit is designed to turn on when the switch is open or simply not plugged into the unit at all. Should the switch fail in flight it will not turn your power supply off.
Over all I am satisfied this unit will be a solid performer for my 50cc gasser at a very good price point.
KR
Quality
Value
Overall
Quality
Value
Overall
I have received the above pictured panel and it is a simple straight through power distribution panel, whatever power goes in the same comes out. (Three selectable UBEC operating voltage options (via Jumper): There is not a jumper wire to change the output voltage. The RX voltage is a constant 5 VDC. Hobby King has miss represented this item. I do believe the device will work fine but it is not as advertised.
Quality
Value
Overall
Quality
Value
Overall
I just got this red power distributor board and here is what I found. Knowing ahead of time this borad passes the power from the batteries striaght to the servo's I opted to use Life batteries. I am getting the 6.7v from the batteries power regulated to the reciever at 4.9v and I am getting 6.7v to all 8 servo's connectors on the board. I am only using a 7 channel reciever so I am using a servo extension on the board from the channel 8 position to supply 4.9v to the CDI power input of the board. That way I will not need an extra battery for my CDI cut switch. I than ran a servo extension from the position 9 on the board to channel 7 of my reciever so when I turn on channel 7 that turns on the CDI for my ignition and this setup works perfectly. I have it on a 82" Skyshark P-40 with a 50cc XYZ engine. Great value for the money
Quality
Value
Overall
Quality
Value
Overall
I have 4 of these now and they work faultlessly, I use them for HV setups ie: 7.2v lipo in and 7.2v to servos and receiver, I even have one in a 35pcnt aerobatic plane.

As a pass through power box these are perfect. I would give 10 stars if I could.
Quality
Value
Overall
Quality
Value
Overall
Muito boa esta Powerbox, bem facil de entender as ligacoes, Nao utilizarei o kill switch dela, no mais parece ser muito bem feita.
Quality
Value
Overall
Quality
Value
Overall
Gesamtbewertung 10/2/2012

__hans

34 likes



ich habe 2stck davon.achtung nicht lipotauglich.Spannung auf servos mit 2s 6.6volt.cdi schaltung keine fuktion.ansonsten ok.

Hallo Hans, warum

bist du der Meinung es ist nicht Lipo tauglich ??? Mit 2S sollte es doch passen.
Quality
Value
Overall
Quality
Value
Overall
This is merely a glorified power distribution bus.



It has a regulator for the receiver ONLY and direct passthrough for the servos.



You MUST use a battery that puts out what the servos can handle.

2S LiFe packs work best with this unit.



Quality
Value
Overall
Quality
Value
Overall
Doesn't work. Same trouple as the other guy. Voltage for servos is voltage of your power (in may cas 6.6v Life) 40$ for nothing. Thank's a lot HK for fake product.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.