Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Multistar 10 Amp Multi-rotore Brushless ESC 2-3S

Generating Links

Turnigy Multistar 10 Amp Multi-rotore Brushless ESC 2-3S

Prezzo:

Now save risparmia 0,00 € 0,00 €

7,24 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9351000001
Spedizione gratuita? Clicca qui per saperne di più!

MultiStar CES sono sono un regolatore di velocità qualità ad un prezzo fantastico! Progettato per una semplice installazione e di facile configurazione questi CES hanno dimostrato di offrire ottime prestazioni quando viene utilizzato in applicazioni multi-rotore. Se il partendo in multi-rotori e hanno bisogno di un facile da installare soluzione che è testato e dimostrato di funzionare con il mestiere multi-rotore allora questi regolatori di velocità sono coperto.

Questi ESC di dispone di una risposta all'acceleratore lineare ma molto liscia, senza sacrificare un rapido, croccante, risposta a qualsiasi ingresso della valvola a farfalla. La sicurezza non è dimenticato con la batteria di tutti Multistar Esc con regolabile LVC (serie tipo di batteria per LiXX per disabilitare LVC), protezione del motore in stallo (sovraccarico), segnale di perdita di arresto e di inserimento sicura.

Tutte le serie Multistar ESC è venuto con connettori proiettile installati che sono adatti per la gestione della potenza nominale del CES. Questo permette di plug and play convenienza con la semplice aggiunta splitter appropriata alimentazione a batteria (3,4 o 6 ESC) e le estensioni di piombo motore dalla linea di accessori modulari Multistar. Che cosa potrebbe essere più semplice?

sono dotate di tutti di Multistar CES un MCU ATmega che apre la porta al firmware personalizzabile - per quelli così inclinato! o in alternativa una scheda di programmazione può essere utilizzato con il software installato per la configurazione facile e veloce con il software pre-lampeggiarono.

Si prega di fare riferimento alle voci relative al di sotto di una soluzione di potenza multi-rotore libera saldatura per soddisfare il vostro prossimo progetto multi-rotore.

Caratteristiche:
• Controllo regolare e acceleratore lineare
• Risposta veloce all'ingresso della valvola a farfalla
• Atmel MCU
• protezione del motore in stallo
• Il segnale della valvola a farfalla perdono la protezione
• Sicuro di accensione (blocco della valvola a farfalla)
• Supporto 480Hz + alti tassi di refresh (fino a 499hz)
• Compatibile con carta di programmazione

Specifiche:
Corrente costante: 10A
Tensione in ingresso: 2-3 cella Lipoly
BEC: Si (lineare) [Rimuovi filo centrale per Dissable]
BEC uscita: 5V / 2A
PWM: 8 KHz
Max RPM: 240,000rpm per 2 poli motore brushless
PCB Dimensioni: 22mm x 17mm
Scarico Spine: Uomo 2 millimetri Connettore pallottola
Spine Motore: 2mm Connettore femmina proiettile
Peso: 16g

Manuale d'uso ora disponibile per il download nella scheda "File".

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 27, 2014

So tiny and lightweight and perfect! Already ready to go with 2mm connectors on all the wires. At this price its a no brainer.. Perfect for my 250!

Kickingmad | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2014

Don't bother with these they don't perform well at all. and can not be flashed with socket tool as atmega chip is to small very small. wast of money get some Simon k instead I'm very disappointed with these want my money back their useless for multi rotors!!!!!!

bill987 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 06, 2014

Mis avec turnigy multistar 1704 pas de surchauffe bon vario

ToddJ | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Bought these for my 250 mini quad with multistar 1704 motors and mini APM flight controller. I did also got the program card and set them up best i can. Even on NIxx on lowest setting my battery alarm goes off and they are already cutting the power to the motors. I am gonna try the HK f10a flashed with simonk next as these will eventually lead to a bad crash. Also the overload cut off is annoying because if you touch back down one or more motors will quit and you have to disarm and rearm. I am not sure why they engineered these the way they did since basically they are not good for multirotors at all??

JAMES | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 15, 2014

Good esc(s) placed in my 330 frame with a KK2.1 board flashed with 1.11 firmware, 3s 1000mah Zippy compact batt, Turnigy 10amp Multistar esc(s) 8ch 9x receiver, power board soldered the esc direct to it and XT60 batt plug on it, 8045 props, this thing it a rocket and getting 6 minutes flight time. After flight everything is cool. Will hoover with only 40pcnt throttle. Motors are Turnigy D2822/17 1100 kv. I did soldered 3.5 bullet ends on everything.

RCBUG80 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 10, 2014

No better than any non flashed esc for multirotors, after flashing with simonk they are 10x better, but this is not easy as there are no pads and the hk flashing tool is too big for the atmega chip on this esc, so you have to solder directly to the chips pin outs. For this reason I would not buy anymore as there are others available that are far easier to flash. If they are specifically for multirotors why does it have brake settings, set to medium as default lol.

They also have no throttle calibration, they are auto like dji escs, but you get throttle calibration when flashed.

adrien | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 23, 2014

i've got a few brands of 10amps this is the one which fits me the best especially compared to the piece of crap red brick also from here...

Przemyslaw | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 18, 2014

Really cool ESC for mini quadcopter. I use them with Turnigy Multistar 1704-1900K, kk2.1. And works well. I calibrated them straight kk board.

Evil Pusher | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 07, 2014

nice little ESC. Runs without flashing to SimonK also good enough for smaller Multicopter.

NumnutChriS | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 06, 2014

Works ok, but gets hot faster than eg. the tgy plush esc. Bought a bunch for a small quad and put another on a bonsai flying wing. Dont forget to get the programming card too!

  1. 1
  2. 2
  3. 3
File dei clienti
Manual - Turnigy Multistar Brushless ESC Download [2384]
Multistar 10A SimonK 1 Download [115]
No File Name Download [94]
Turnigy Multistar ESC Manual Download [2384]
No File Name Download [214]
Multistar 10A flashed with simonk 1 Download [819]
Multistar 10A flashed with simonk 3 Download [3348]
Multistar10A-1 Download [229]
Multistar10A-2 Download [167]
Turnigy ESC All Download [2298]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!