Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Multistar 10A V2 ESC Con BLHeli e 2A LBEC 2-3S V

Generating Links

Turnigy Multistar 10A V2 ESC Con BLHeli e 2A LBEC 2-3S V

Prezzo:

Now save risparmia 0,00 € 0,00 €

8,86 €
Spedito da:
  • USA
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9351000057-0
Spedizione gratuita? Clicca qui per saperne di più!

MultiStar CES sono un regolatore di velocità qualità ad un prezzo fantastico! Progettato per una semplice installazione e di facile configurazione questi CES hanno dimostrato di offrire ottime prestazioni quando viene utilizzato in applicazioni multi-rotore. Se stai partendo in multi-rotori e hanno bisogno di un facile da installare soluzione che è testato e dimostrato di funzionare con il mestiere multi-rotore allora questi regolatori di velocità sono coperto.

Caratteristiche di queste V2 CES software BLHeli per una risposta all'acceleratore lineare ma molto liscia, senza sacrificare un rapido, croccante, risposta a qualsiasi ingresso della valvola a farfalla.

Tutte le serie Multistar ESC è venuto con connettori proiettile installati che sono adatti per la gestione della potenza nominale del CES. Questo permette di plug and play convenienza con la semplice aggiunta splitter appropriata alimentazione a batteria (3,4 o 6 ESC) e le estensioni di piombo motore dalla linea di accessori modulari Multistar. Che cosa potrebbe essere più semplice?

sono dotate di tutti di Multistar CES un ATmega MCU che apre la porta al personalizzabile firmware - Il V2 Multistar viene fornito con il software BLheli preinstallato, e per quelli così inclinato una facilità da usare strumento USB è disponibile per la configurazione e l'aggiornamento tramite il BLHeli Suite GUI.

Si prega di fare riferimento alle voci relative al di sotto di una soluzione di potenza multi-rotore libera saldatura per soddisfare il vostro prossimo progetto multi-rotore.

Caratteristiche:
• Software BLHeli
• aggiornamento strumento USB e configurazione tramite software BLHeli GUI
• Controllo regolare e acceleratore lineare
• Risposta veloce all'ingresso della valvola a farfalla
• Atmel MCU
• protezione del motore in stallo
• Il segnale della valvola a farfalla perdono la protezione
• Sicuro di accensione (blocco della valvola a farfalla)
• Supporto 480Hz + alti tassi di refresh (fino a 499hz)
• Supporta OneShot125

Specifiche:
Corrente costante: 10A
Tensione in ingresso: 2-3 cella Lipoly
BEC: Si (lineare) [Rimuovi filo centrale per Dissable]
BEC uscita: 5V / 2A
PWM: 8 KHz
Max RPM: 240,000rpm per 2 poli motore brushless
PCB Dimensioni: 22mm x 17mm
Scarico Spine: Uomo 2 millimetri Connettore pallottola
Spine Motore: 2mm Connettore femmina proiettile
Peso: 11.4g

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Alexander | Acquirente verificato

  • Overall
  • Quality
  • Value

yak 55 foamie

Sep 13, 2017

Im running this on a yak 55 32" 3d foamie i built. This one is heavy at 350g with a 850mah 3s batterie due to the foamboard used (it should be 170g with a 2s 300mah batterie if the correct foam is used)
im using the motor and prop that was recomended in the build, at 3s it flies fine even hovers. ESC seems to be coping fine

Felix | Acquirente verificato

  • Overall
  • Quality
  • Value

Perfect Motor for QAV1306-3100kv

Dec 17, 2016

I use one of these on a 48cm flying wing of around 110 gram with the QAV1306-3100kv and a 2s nano-tech 1000mAh (+50g = around 160g). 5045 Prop is fine on 2s, for 3s a 4050 was almost to much.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 12, 2016

A fine ESC. Doesn't get too hot and provides me enough power.

Denis | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 24, 2016

Very light, very small, but its not 10A.
Gets pretty hot even under 5-7 amps in hover mode while cooled by props air flow.
I used them in my Trifecta, they power 1806 motors.

CaliforniaFPV | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 03, 2015

Love these esc. I kept going back to my loved afro esc but for the spidex a throw away quad this inexpensive but we'll performing esc is doing the trick.

Telmo | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 21, 2015

Great ESC for the price. the V2s are a MUST have for a budget multirotor.

I've paired these with the DYS BE1806s and they work quite well once programmed. However, it is important to note that when using the USB programmer you must remove the power lead from the USB programmer to this specific ESC as these ESCs have their own power UBEC.

Additionally, it should be noted that when upgrading the UBEC firmware, you must disable demagnetic compensation completely to ensure you don't burn up your high KV motors. (This features is only available for v13 of the firmware for these ESCS)

So far these have provided cool, steady power to my DYS BE1806s, and calibration was as easy as pie.

My only problem is one of these ESCs (of 6) came faulty and fried the windings on two of my motors. However HK was quick to replace them without issue.

Autotechnica | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 04, 2015

Pretty good ESC's. I noticed people are burning these things out a lot. You can't use a high KV motor. Max I would run is the 1900KV on a 250 quad. A 2150kv baby beast would surely burn it out. It works well if you're only planning to use it for a light weight low powered quad with a 5" prop. A 6" prop would blow this ESC. Know the limits and you'll be happy. They are oddly shaped which makes me a bit awkward to mount, aside from that, no complaints. Great price for a decent entry level ESC. Needs calibration out of the box.

pawcio0928 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 14, 2015

Small, silicon cable, work great with my motors.

dtm360 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 29, 2014

No problems running these ESC with DYS 1806 2300kv motors. It's just a shame that the on-board capacitor makes these ESC a little thinker than usual. If you are looking to re-solder the wires onto the ESC, you need to be quite careful, the solder pads for the motors wires are not on the edge of the board, but in the middle (HW Skywalker style!)

Aleksandr | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 25, 2014

The Bad:
1) One of 4 came dead. It was replaced by warranty, but god knows when it will arrive.
2) Cucumbercome hardware assembly.

The Good:
1) Works.
2) Starting with BLHeli (and BLHeliSuite) 12.2 this ESC is officially supported.

The Bottom:
One of working 3 was with different settings. So it has sense to check settings before use. Also keep in mind that you can only program it with BLHeliSuite or in programming mode with remote(not very handy). Also I was foolish to order only 4. You probably will need spare one anyway.

  1. 1
  2. 2
File dei clienti
Blheli atmel manual Download [172]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!