New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Multistar 30 Amp Multi-rotore Brushless ESC 2-4S

Turnigy Multistar 30 Amp Multi-rotore Brushless ESC 2-4S

Discontinued Product

Please continue searching for a similar product.
SKU:
9351000004
WANT FREE SHIPPING? Click here to find out more!

PREZZO: $ 9,85 fino ad esaurimento scorte !!!!!!!!!!

MultiStar CES sono sono un regolatore di velocità qualità ad un prezzo fantastico! Progettato per una semplice installazione e di facile configurazione questi CES hanno dimostrato di offrire ottime prestazioni quando viene utilizzato in applicazioni multi-rotore. Se il partendo in multi-rotori e hanno bisogno di un facile da installare soluzione che è testato e dimostrato di funzionare con il mestiere multi-rotore allora questi regolatori di velocità sono coperto.

Questi ESC di dispone di una risposta all'acceleratore lineare ma molto liscia, senza sacrificare un rapido, croccante, risposta a qualsiasi ingresso della valvola a farfalla. La sicurezza non è dimenticato con la batteria di tutti Multistar Esc con regolabile LVC (serie tipo di batteria per LiXX per disabilitare LVC), protezione del motore in stallo (sovraccarico), segnale di perdita di arresto e di inserimento sicura.

Tutte le serie Multistar ESC è venuto con connettori proiettile installati che sono adatti per la gestione della potenza nominale del CES. Questo permette di plug and play convenienza con la semplice aggiunta splitter appropriata alimentazione a batteria (3,4 o 6 ESC) e le estensioni di piombo motore dalla linea di accessori modulari Multistar. Che cosa potrebbe essere più semplice?

sono dotate di tutti di Multistar CES un MCU ATmega che apre la porta al firmware personalizzabile - per quelli così inclinato! o in alternativa una scheda di programmazione può essere utilizzato con il software installato per la configurazione facile e veloce con il software pre-lampeggiarono.

Si prega di fare riferimento alle voci relative al di sotto di una soluzione di potenza multi-rotore libera saldatura per soddisfare il vostro prossimo progetto multi-rotore.

Dettagli:
• Controllo regolare e acceleratore lineare
• Risposta veloce all'ingresso della valvola a farfalla
• Atmel MCU
• protezione del motore in stallo
• Il segnale della valvola a farfalla perdono la protezione
• Sicuro di accensione (blocco della valvola a farfalla)
• Supporto 480Hz + alti tassi di refresh (fino a 499hz)
• Compatibile con carta di programmazione

Specifiche:
Corrente costante: 30A
Tensione in ingresso: 2-4 celle Lipoly
BEC: Si (Switching) [Rimuovere filo centrale per Dissable]
BEC Uscita: 5.5V / 4A
PWM: 8 KHz
Max RPM: 240,000rpm per 2 Poli motore brushless
PCB Dimensioni: 41mm x 24 millimetri
Spine di scarico: maschio 3,5 millimetri proiettile Connettore
Motore Spine: Connettore femmina 3,5 millimetri proiettile
Peso: 29g

Manuale d'uso ora disponibile per il download nella scheda "File".

  • SKU 9351000004
  • Brand MultiStar
  • Capacità ( mAh ) -
  • Peso 34.0000
  • Lunghezza 110.00
  • Packaging Width 25.00
  • Altezza 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

??????? ??????????? ????, ???????? ? ???????????.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??????? ??????????? ????, ???????? ? ???????????.

The price for this ESC is great and one of the selling factors for me. I have 4 of the 20A multistars on my quad. However the 30A I received in the mail did not live up to my expectations. It was dead from the start. For 9 bucks it really is not worth the hassle of trying to have hobbyking correct the issue so I went ahead and cut the heat shrink and immediately found the failed component. I'll just get a Plush to replace this one on my next order.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The price for this ESC is great and one of the selling factors for me. I have 4 of the 20A multistars on my quad. However the 30A I received in the mail did not live up to my expectations. It was dead from the start. For 9 bucks it really is not worth the hassle of trying to have hobbyking correct the issue so I went ahead and cut the heat shrink and immediately found the failed component. I'll just get a Plush to replace this one on my next order.

I am a novice helicopter driver. These speed controllers have survived dozens of crashes. Some of these crashes have broken other components on my quad. but the speed controllers keep going. I am very impressed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am a novice helicopter driver. These speed controllers have survived dozens of crashes. Some of these crashes have broken other components on my quad. but the speed controllers keep going. I am very impressed.

Trs bon ESC, ne chauffent pas et pour l'instant, me convienne en firmware officiel (non SimonK). Je recommande pour les multirotors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Trs bon ESC, ne chauffent pas et pour l'instant, me convienne en firmware officiel (non SimonK). Je recommande pour les multirotors.

Warning............. if you are going to use these check the voltage output of the bec with a multimeter as I fried 2 kk2.1.5 flight control boards because the esc was putting out 12v instead of the 5.5v its supposed to
and a mate also received one that was doing the same thaing must be a bad batch going around
BUT if you get good ones the are an awesome esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Warning............. if you are going to use these check the voltage output of the bec with a multimeter as I fried 2 kk2.1.5 flight control boards because the esc was putting out 12v instead of the 5.5v its supposed to
and a mate also received one that was doing the same thaing must be a bad batch going around
BUT if you get good ones the are an awesome esc

Nice ESC, very easy to calibrate with APM. One of my ESCs got fried when i accidentily connected to the power distribution in reverse polarity, ended up frying my APM as well. It would've been nice if they could put reverse polarity protection as many car ESCs have, but since it was never specced, i dont blame HK. It was my own mistake for plugging it anyways. But yeah, nice ESC that is also compatible with Simonk firmware, would recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice ESC, very easy to calibrate with APM. One of my ESCs got fried when i accidentily connected to the power distribution in reverse polarity, ended up frying my APM as well. It would've been nice if they could put reverse polarity protection as many car ESCs have, but since it was never specced, i dont blame HK. It was my own mistake for plugging it anyways. But yeah, nice ESC that is also compatible with Simonk firmware, would recommend.

Find a different ESC I have 3 installed on my tricopterthe and BEC has an 11 volt output and I just fried my second KK2 board before I thought to check the voltage. Only one has an 11V output but they are all coming off and going into the trash.

My fault for not reading the reviews or thinking of checking the BEC voltage before installing my new controller.

Stay away for this ESC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Find a different ESC I have 3 installed on my tricopterthe and BEC has an 11 volt output and I just fried my second KK2 board before I thought to check the voltage. Only one has an 11V output but they are all coming off and going into the trash.

My fault for not reading the reviews or thinking of checking the BEC voltage before installing my new controller.

Stay away for this ESC

recolatori perfetti per droni e naza

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

recolatori perfetti per droni e naza

great ESC, no sign of warming even on hard flights with 17amp motors

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great ESC, no sign of warming even on hard flights with 17amp motors

Steer clear of these. I purchased three and all three BEC voltages jumped to 11 volts which burned up my KK2 board and one of my receivers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Steer clear of these. I purchased three and all three BEC voltages jumped to 11 volts which burned up my KK2 board and one of my receivers.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Manual - Turnigy Multistar Brushless ESC Download [2384]
New components Download [458]
No File Name Download [2384]
Burned ESC Download [3371]
pinout Download [3087]
Throttle response graph (SimonK firmware Download [32]
No File Name Download [2384]
Defective BEC Download [447]
Turnigy_30a_ESC_Manual.pdf Download [2384]
Multistar Manual Download [2384]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save