Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Generating Links

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Prezzo:

Now save risparmia 0,00 € 0,00 €

21,26 €
Stato:
Non disponibile!
SKU:
9351000104-0
Spedizione gratuita? Clicca qui per saperne di più!

Turnigy MultiStar BLheli_32 ARM ESCs are super simple to install and are very easy to setup. They have already taken places on the podium a number of times with our beta testing Ninjas. If you're looking for an edge against the competition and take your FPV drone racing seriously the Turnigy MultiStar 32bit ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (Rumored to have been developed in DrEvils Lab) and deliver a smooth linear throttle response without sacrificing a rapid, crisp response to any throttle inputs.


Turnigy MultiStar ESC's come pre-tinned, solder ready, all you need to do is adjust the wire lengths, solder on the type of battery connection of your choice and then solder on the motor wires. With their small lightweight design these ESC's will have you racing fast and at a very affordable price.


Features:
• Smooth and linear throttle control
• Fast response to throttle inputs
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)


Specs:
Constant Current: 51A
No of Cells: 2-6S Lipoly
Voltage: 8.4~25.2V
BEC: Opto
Timing: Auto
Frequency: 48Mhz
Governor: None
MCU: Arm Cortex-M0
Dimensions: 36 x 21 x 5mm
Weight: 17.2g inc wires

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Valev | Acquirente verificato

  • Overall
  • Quality
  • Value

Good

Jan 21, 2021

Very good ESC!

steven | Acquirente verificato

  • Overall
  • Quality
  • Value

Stopped working after 2 weeks

Nov 11, 2019

stopped working after 2 weeks of moderate use

GJ | Acquirente verificato

  • Overall
  • Quality
  • Value

Great controller

Sep 07, 2019

The ESC works great.
Programming with a passthrough with an Arduino Nano and BLHeli_32.
Doesnt even get warm at 55A.

Klaus | Acquirente verificato

  • Overall
  • Quality
  • Value

one smoked up by the first use

Aug 09, 2019

I bought 2 of them. On first connecting on a 4S battery one of them broke immediately ( both was connected in parallel mode, so the polarity of the battery was right ) , it came a little bit smoke out the housing and since probably missing a phase, a connected motor jerky only, this is no good quality

Norbert | Acquirente verificato

  • Overall
  • Quality
  • Value

Good ESC also or glider

Jun 23, 2019

I used it as a Glider ESC with 2S Lipo at 35A. No need for a BEC, because I use HV Servos. Stays cool and good brake with a 16x8 prop

Klaus | Acquirente verificato

  • Overall
  • Quality
  • Value

Geniale Regler mit Telemetrie

Jun 12, 2019

Perfekter Regler für Copter, Modellboote und Flugzeuge. Läßt sich einwandfrei löten, man sollte es nur ein wenig können..... Eine Anleitung wird nicht benötigt, es ist ein blheli_32 Regler und die bedienen sich alle gleich.... Mit der blheli_32 Suite läßt sich der Regler einwandfrei programmieren, hat sogar Vorwärts und Rückwärts Funktion (wenn man will). Zusätzlich vorhanden ist Telemetrie, mit dem Blheli Telemetry Feeder ist diese sogar mit Frsky und Flysky zu nutzen.

Geoff Kemp | Acquirente verificato

  • Overall
  • Quality
  • Value

Difficult to Solder

May 24, 2019

I could not get a reliable joint on the motor tabs because the tabs can suck a massive amount of heat out of the solder before it flows. no matter how hot I got the tab and iron I always ended up with a dry frosty joint. My 60 watt iron I've used on thousands of things RC big and small. thick and thin for many years without difficulty just could not do the job. The last attempt I melted one of the FETS of the board and still the solder would not flow enough. Dang!

William | Acquirente verificato

  • Overall
  • Quality
  • Value

Great ESCs

Jan 07, 2019

I have never had any problems with these. All the settings are made with BLHELI 32 software available free on line. These are the most reasonably priced ESCs I have found that are rated at 51 amps 6s.

Zdenek | Acquirente verificato

  • Overall
  • Quality
  • Value

No user manual

Apr 24, 2018

It is not possible change any setting, there is no user manual.

File dei clienti
turnigy-multistar-esc-manual.pdf Download [2]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!