Turnigy Multistar 4225-390Kv 16Pole multi-rotore Outrunner

• Overall
• Quality
• Value

Customer Rated

Feb 24, 2016

Working well with Hobbywing 40A ESCs.

They are NOT working with Afro 20A 2-6s Lipo out of the box.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 08, 2015

Motor slido. Uso 4 num quad feito por mim com batria 6S 10A. Dura mais que a minha pacincia.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 05, 2015

Buen motor, he experimentado con cambios en el eje para ser usado en aviones, definitivamente se obtienen buenos resultados.

• Overall
• Quality
• Value

Customer Rated

May 30, 2015

Very good motor! Used with a 6S 4000mah battery and a T-motor 12x5.5 prop. The quad is about 2.3kg and has plenty of power! With gimball i get 14-15 minutes of flying! Here is a video: https://www . youtube . com/watch?v=qyrWGN_rUsA

• Overall
• Quality
• Value

Customer Rated

May 28, 2015

Very powerful, mechanically good. Using 4225 motors on 700mm hexacopter with 6S Lipo and 13 inch props. Motors are not on its limits, still cold after 15 minutes of flight. Same for 12 inch props.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 05, 2015

Wow! These come in their own little tin box. My mind is spinning with all the possible applications for the box. Oh, and the motors not bad either - I like the extra long leads. Bearings are good and solid, so are the leads into the motor. These are a solid well made unit.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 29, 2015

very cool running motors, no heat at all, producing a lot of thrust in conbination with 17x5.8 or 17x5.5 propellers.

I like the sound of these brushless motors, will buy them again. They come with over(!) 35cm wires, so no problem leading them trough the tubes of multicopter having enough wire left to connect to outside ESCs.

• Overall
• Quality
• Value

Customer Rated

Dec 19, 2014

Mechanically this is a good motor for the money.
Unfortunately there is no data sheet for thrust over revolutions.

I did my own measurements with a 6S lipo and 12" CFK-prop:

50pcnt throttle - 3.5 amps - 600g thrust - 3200 rpm
100pcnt throttle - 6.8 amps - 910g thrust - 3880 rpm

This motor is at it's limit on 6S and can operate max. 12" props.
On 4S it can handle up to 15" props (reported by international customers).

• Overall
• Quality
• Value

Customer Rated

Oct 12, 2014

I bought 6 of them for a Y6 multi, and receive wrong ones , 12 poles motors , not 16 as published or shown in the picture

• Overall
• Quality
• Value

Customer Rated

Jul 26, 2014

Seem to be smooth and balanced.
I've been trying to run these with 15x5.5 props on a 6S system, and the ESC's (ZTW 30A Spiders) keep losing sync and the quad falls down.
Still testing...