New Items Notizie Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy nano-tech 1400mAh 3S 15 ~ 25C Lipo AIRSOFT Confezione

Turnigy nano-tech 1400mAh 3S 15 ~ 25C Lipo AIRSOFT Confezione

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

10,51 €
Stato:
Disponibile
SKU:
NG1400B.3S.15
WANT FREE SHIPPING? Click here to find out more!

Quando si tratta di mettere giri verso il basso range, nessuno vuole scendere a compromessi sulla potenza di fuoco! questo è il motivo per cui i leggendari batterie nano-tech Turnigy sono ora disponibili per Airsoft combattimento. Superiore giri del motore, meno abbassamento di tensione e tempi di funzionamento estesi uguali prestazioni migliori dal proprio arma di scelta.

La serie Airsoft nano-tech dispongono anche 5C feedback carica che li mette di nuovo in prima linea più veloce!

Ottenere un vantaggio sleale e assicurarsi che i vostri avversari sanno che sono state prese da nano-tech!

Spec.
Capacità: 1400mAh
Tensione: 3S1P / 3S cellulare / 11.1V
Scarico: 15C Costante / 25C Burst
Peso: 115g (compreso il cavo, spina & caso)
Dimensioni: 128x7x20mm (ciascuno)
Balance Plug: JST-XH
Scarico Spina: Mini-Tamiya (Mini Molex)

La tecnologia nano-core nelle batterie agli ioni di litio è l'applicazione di nanometri additivi conduttivi.

1) Gli additivi nanometri conduttivo formano reti di elettroni conduttore Ultrastrong negli elettrodi che può aumentare la conduttività elettronica. 2) Questi additivi creano una capacità superstrong per imbibizione nel veicolo liquido per fornire più canali ionici. Questo migliora la capacità di trasmissione di ioni e diffusione di ioni. Attraverso migliorare conducibilità e ioni trasmissione elettronica, l'impedenza è ridotto e la polarizzazione di scarico alto tasso diminuisce notevolmente.

Vantaggi rispetto alle batterie tradizionali Lipo:
-Power Densità raggiunge 7,5 kW / kg.
abbassamento di tensione durante la scarica -less ritmo elevato, dando più potere sotto carico.
impedenza -Internal può raggiungere a partire da 1.2mΩ rispetto a quella di 3mΩ di uno standard Lipoly.
-Maggiore Controllo termico, pacchetto di solito pretende superare 60degC
gonfiore -spessore durante pesante pretende molto carico supera il 5%, rispetto al 15% di una normale Lipoly durante carico pesante.
Capacità -Higher durante la scarica pesante. Più del 90% al tasso del 100% C.
-fast Carica in grado, fino a 15C su alcune batterie.
-Longer Ciclo di vita, quasi il doppio di quello della tecnologia LiPoly standard.

* La lunghezza del cavo di ricarica equilibrio può variare

  • SKU NG1400B.3S.15
  • Brand nano-tech
  • Peso 162.0000
  • Lunghezza 126.00
  • Packaging Width 7.00
  • Altezza 21.00
  • Capacità ( mAh ) 1400.00
  • Discharge ( c ) 15.00
  • Max Tasso di carica ( C ) 5.00
  • Lunghezza -A ( mm ) 128.00
  • Altezza - B ( mm ) 20.00
  • Width-C(mm) 7.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

best lippo for my airsoftgun..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best lippo for my airsoftgun..

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking