New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy SK450 Quadrirotore Powered By Multistar. La spina e la mosca Quadcopter Set (PNF)

Turnigy SK450 Quadrirotore Powered By Multistar. La spina e la mosca Quadcopter Set (PNF)

Now save risparmia 0,00 € 0,00 €

117,16 €
Stato:
Non disponibile!
SKU:
9171000447-0
WANT FREE SHIPPING? Click here to find out more!

Introducendo la Turnigy SK450 Quadrirotore alimentato da Multistar. Turnigy l'obiettivo di fare un grande valore, facile da usare, plug and volare elicottero quad senza compromessi. Il risultato è un elicottero quad utilizzando tutti i componenti di livello superiore e di comprovata prestazioni.

Turnigy iniziato con il telaio SK450 popolare conosciuta per la sua durata, ha poi aggiunto alcune modifiche di dettaglio con Multistar braccia anteriori verde e una cupola incidente per il controllore di volo. Per il sistema di alimentazione, Turnigy guardato alla collaudata linea di Multistar di motori e CES, la scelta del potente 2213 e abbinandoli con regolatori di velocità Multistar 20A. Quando è arrivato al controllore di volo la scelta è stata chiara con il tanto amato KK2.1, tutti i pre-configurati e la configurazione in modalità X. Il Turnigy SK450 è dotato di 2 formati di puntelli; 8 pollici per 2200mah o batterie più piccole e 10 pollici per batterie più grandi o per chi desidera aggiungere una telecamera per catturare vista a volo d'uccello. Turnigy avvolge il pacchetto con un apposito valigetta con inserti in schiuma pretagliati per l'elicottero quad, trasmettitore, batterie e tutti gli accessori, rendendo il trasporto e lo stoccaggio un gioco da ragazzi.

Turnigy ha fatto tutto il lavoro duro per voi. Non passare ore a cercare di capire i migliori componenti per l'uso o assemblaggio di tempo. Uscire da lì e iniziare a volare con il nuovo, la spina e volare, Turnigy SK450, alimentato da Multistar.

Caratteristiche:
• Telaio SK450 Special edition
• sistema di alimentazione Multistar
• KK2.1 controllore di volo
• scatola di trasporto con inserti in schiuma Include
• 2 set di oggetti di scena
• pre-assemblato e messo a punto

Specifiche:
Telaio: SK450
Interasse o motore a motore diagonale: 450 millimetri
Peso: 680g senza batteria
Motori: Multistar 2213 935kv
ESC: 20A Multistar
Eliche: 0845 ~ 1045 2xCW 2xCCW
Controllore di volo: KK2.1

Incluso:
spina SK450 1 x e volare Quadrirotore
4 x 0845 eliche pollici 2xCW 2xCCW
4 x 1045 eliche pollici 2xCW 2xCCW
Velcro cinghie e hardware di ricambio
caso scatola integrato con inserti in schiuma

richiesto:
1 x 2200mAh 3S 11.1V LiPoly batterie e caricabatterie
1 x sistema radio 5CH

  • SKU 9171000447-0
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 1770.0000
  • Lunghezza 420.00
  • Packaging Width 155.00
  • Altezza 420.00
  • SK450 PNF
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

very terrible firmware ESCs
there are two possibility, change esc with other type, or remapping this with simonk firmware...
absolutly impossible to fly...
this is the problem during the throttle calibration:
https://www.youtube.com/watch?v=2tpa2IcxhSE

for remapping it's necessary buy the atmel socket cable, and atmega usb adaptor... but there are 3 tipe of usb adaptor (the board of usb adaptor have a different chip and pin position)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very terrible firmware ESCs
there are two possibility, change esc with other type, or remapping this with simonk firmware...
absolutly impossible to fly...
this is the problem during the throttle calibration:
https://www.youtube.com/watch?v=2tpa2IcxhSE

for remapping it's necessary buy the atmel socket cable, and atmega usb adaptor... but there are 3 tipe of usb adaptor (the board of usb adaptor have a different chip and pin position)

SK450 is an Excellent Frame, overall the multistar esc are garbage, for a stable fly you need to change these with simonk esc

-motors are OK

- you need to change the multistar esc, buy 4 pair of 20 ampere chinese simonk esc , with 3.5 mm bullet , the quad will change, it will be more and more stable

-kk is not so bad, you need to do setting in the right way

- use only carbon/nylon mix propellers, the gemfan are only nylon and are not good at all is cheap plastic garbage, only buy dji propellers, that are compatible with the motor s shaft

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

SK450 is an Excellent Frame, overall the multistar esc are garbage, for a stable fly you need to change these with simonk esc

-motors are OK

- you need to change the multistar esc, buy 4 pair of 20 ampere chinese simonk esc , with 3.5 mm bullet , the quad will change, it will be more and more stable

-kk is not so bad, you need to do setting in the right way

- use only carbon/nylon mix propellers, the gemfan are only nylon and are not good at all is cheap plastic garbage, only buy dji propellers, that are compatible with the motor s shaft

good quadcopter, but dont use 10" props/ On 8" fly good!

this video, how it can fly without fpv
:)

https://youtu.be/lglEBpkGze0

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good quadcopter, but dont use 10" props/ On 8" fly good!

this video, how it can fly without fpv
:)

https://youtu.be/lglEBpkGze0

Very pleased! My first quadcopter, pretty easy to set up and very well-built. Didn't need to flash or upgrade anything just set up my radio and receiver, then started to practice!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very pleased! My first quadcopter, pretty easy to set up and very well-built. Didn't need to flash or upgrade anything just set up my radio and receiver, then started to practice!

Very nice package to get into multicopters if you already have a transmitter/receiver (I only flew airplanes up to this point). The propellers needed a bit of a trim to balance them, but that is needed on all propellers, especially the cheap ones.

I was able to tune it and get it responsive and without any wobble with the smaller propellers (8045), but couldn't get all the wobbliness out with the larger ones with the original ESC firmware.

Note that the stock ESCs give up if you get the throttle too low and the motor stalls and it won't start up again until you disable the throttle for a couple of seconds and start it up again, I crashed because of this, but it survived a 15 meter fall into a dirt field with nothing broken, the frame is very sturdy!
Because they are supported, I reflashed the ESCs with SimonK's firmware and now it's perfect, if one motor stalls it keeps trying to spin it up.
I've made a tutorial on how to flash the firmware on this ESC: https://www.youtube.com/watch?v=_ijB-HAgJ3k

As a final note, I think a high quality transmitter/receiver might be more noticeable on a quad than on a glider, it might be obvious for a veteran, but if you are thinking about upgrading your transmitter, getting into multicopters might be the right time to do it. Right now I'm using a Turnigy i6 and the throttle control could be a bit more precise, but it will still fly just fine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice package to get into multicopters if you already have a transmitter/receiver (I only flew airplanes up to this point). The propellers needed a bit of a trim to balance them, but that is needed on all propellers, especially the cheap ones.

I was able to tune it and get it responsive and without any wobble with the smaller propellers (8045), but couldn't get all the wobbliness out with the larger ones with the original ESC firmware.

Note that the stock ESCs give up if you get the throttle too low and the motor stalls and it won't start up again until you disable the throttle for a couple of seconds and start it up again, I crashed because of this, but it survived a 15 meter fall into a dirt field with nothing broken, the frame is very sturdy!
Because they are supported, I reflashed the ESCs with SimonK's firmware and now it's perfect, if one motor stalls it keeps trying to spin it up.
I've made a tutorial on how to flash the firmware on this ESC: https://www.youtube.com/watch?v=_ijB-HAgJ3k

As a final note, I think a high quality transmitter/receiver might be more noticeable on a quad than on a glider, it might be obvious for a veteran, but if you are thinking about upgrading your transmitter, getting into multicopters might be the right time to do it. Right now I'm using a Turnigy i6 and the throttle control could be a bit more precise, but it will still fly just fine

I fly my sk450 4s with 3200 mAh and 8x4.5 prop. No problem (flytime:15 -20 min.). I made a wire from the battery to the KK2.1.5 and alarm at 144 volts. To increase the visibility I made four LEDs under each engine ( two blue and two red, connected in my receiver 5V). Nice drone to learn flying and understanding the settings for a drone. It's a good basic to build it out to FPV - the KK2.1 has an option for a selfmade gimbal - see YouTube.
The quality of the ESC's, props and engines could be better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fly my sk450 4s with 3200 mAh and 8x4.5 prop. No problem (flytime:15 -20 min.). I made a wire from the battery to the KK2.1.5 and alarm at 144 volts. To increase the visibility I made four LEDs under each engine ( two blue and two red, connected in my receiver 5V). Nice drone to learn flying and understanding the settings for a drone. It's a good basic to build it out to FPV - the KK2.1 has an option for a selfmade gimbal - see YouTube.
The quality of the ESC's, props and engines could be better.

NOT ARF. Its totally uncontrollable and dangerous. I have spent hours watching videos and doing research to try and get this to fly, I have done all the setting recommended and its still not any better. I have heli 450s and planes so am not new to RC. You might be lucky but I would NOT buy this again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

NOT ARF. Its totally uncontrollable and dangerous. I have spent hours watching videos and doing research to try and get this to fly, I have done all the setting recommended and its still not any better. I have heli 450s and planes so am not new to RC. You might be lucky but I would NOT buy this again.

Nice, crash proof frame, supplied with 8x4.5 props and 10x4.5 1 set each.
Straight out of the box on big props i had really hard time to keep altitude steady and auto level was a bit unreliable.
with 8x4.5 everything was lot smoother, but at cost of reduced flight times and lifting capability, just managed to take off with extra battery as a load.Used 2 3Ah multistar batteries.
Didn't test lifting with 10x4.5 props as first set got snapped due to mentioned stability issues combined with total noob piloting it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice, crash proof frame, supplied with 8x4.5 props and 10x4.5 1 set each.
Straight out of the box on big props i had really hard time to keep altitude steady and auto level was a bit unreliable.
with 8x4.5 everything was lot smoother, but at cost of reduced flight times and lifting capability, just managed to take off with extra battery as a load.Used 2 3Ah multistar batteries.
Didn't test lifting with 10x4.5 props as first set got snapped due to mentioned stability issues combined with total noob piloting it.

Flew once then the KK smoked. Changed boards 4 times...every time I connect 11.1v the boards literally smokes. Now I have to try to get a refund, should be fun...not. I will keep you posted on HK's excellent customer service regarding faulty merchandise.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew once then the KK smoked. Changed boards 4 times...every time I connect 11.1v the boards literally smokes. Now I have to try to get a refund, should be fun...not. I will keep you posted on HK's excellent customer service regarding faulty merchandise.

Really good value for money!, bought this for 130 euro including shipping, and wow, it's quite unstable out of the box, but balancing props doin sum programming and you got urself a really nice flying quad for a really low ammount of cash, i recommend this to anyone, thanks HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good value for money!, bought this for 130 euro including shipping, and wow, it's quite unstable out of the box, but balancing props doin sum programming and you got urself a really nice flying quad for a really low ammount of cash, i recommend this to anyone, thanks HK!

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
SK450 Manual Download [1870]
SK450 Manual Download [1870]
SK450_Action Cam_LED Download [3]
sk450 with sharkX6 in action Download [27]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save