New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

TURNIGY Super Bright LED bassa tensione dispositivo di allarme

TURNIGY Super Bright LED bassa tensione dispositivo di allarme

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

8,79 €
Stato:
Disponibile
SKU:
9107000349-0
WANT FREE SHIPPING? Click here to find out more!

Il LED di allarme Turnigy Super Bright bassa tensione ti dà un avvertimento ben visibile per mezzo di un segnale lampeggiante rapida quando la tensione del gruppo di alimentazione (LiPoly) scende a 3,5 volt, che vi permetterà di recuperare il modello valido in modo sicuro prima del cut-off a bassa tensione attiva .
Con le due modalità LED semplicemente cambiato premendo il pulsante sull'unità di controllo e conduce lungo LED, il dispositivo è semplice da installare e da usare.
Il dispositivo si attiva collegando il cavo di alimentazione ad una presa equilibrio sulla batteria LiPoly, facendo attenzione a rispettare la corretta cioè polarità. il conduttore negativo sul conduttore collegato al terminale negativo sulla spina equilibrio.

Caratteristiche:
• LED super-luminose.
• costante selezionabile o lampeggiante modalità LED.
• Può essere adattato in tutti i tipi di veicoli.
• Dimensioni compatte.


Specifiche:
Tensione in ingresso: 3.3V ~ 7.4V
Potere LED: 1W, 350mA (ciascuno)
LED di colore: rosso e verde
Temperatura di colore del LED: 5000-7000K
Flusso luminoso del LED: 80 ~ 100LM
LED lunghezza del cavo: 600 millimetri
Dimensioni Controller: 44x21x7mm (LxWxH)
Peso: 15g


  • SKU 9107000349-0
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 24.0000
  • Lunghezza 90.00
  • Packaging Width 30.00
  • Altezza 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Review Update: lipo does get a bit out of ballance, but it aint that bad at all for normal use. When you have the LED's on and just let the model sit there without flying around you get more out of balance. For normal flight it's just fine. Gave it 5 stars now as I like this a lot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review Update: lipo does get a bit out of ballance, but it aint that bad at all for normal use. When you have the LED's on and just let the model sit there without flying around you get more out of balance. For normal flight it's just fine. Gave it 5 stars now as I like this a lot.

Be aware this will only work properly on 1 or 2cell lipos. You can use it on lipos with more cells BUT it wont monitor them and will unbalance the lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be aware this will only work properly on 1 or 2cell lipos. You can use it on lipos with more cells BUT it wont monitor them and will unbalance the lipo.

Got mine and it has the same board as the version with 4 leds: PRODUCT ID: 9107000354-0 so you can easy connect 2 extra LED's like the 2 x White Add On LED Light Set. The LED's are 1W 350ma and are very bright, good visible in daylight. The connector is the only thing I don't like, it only reads the first 2 cells and a lipo gets a bit out of balance when used. but with it you will be able to connect it to any lipo you want. You can always solder a normal JST-XH connector to it for a more easy and foolproof connection.
See video: https://www.youtube.com/watch?v=iVJGQ24PSgQ (if blocked try vimeo!)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine and it has the same board as the version with 4 leds: PRODUCT ID: 9107000354-0 so you can easy connect 2 extra LED's like the 2 x White Add On LED Light Set. The LED's are 1W 350ma and are very bright, good visible in daylight. The connector is the only thing I don't like, it only reads the first 2 cells and a lipo gets a bit out of balance when used. but with it you will be able to connect it to any lipo you want. You can always solder a normal JST-XH connector to it for a more easy and foolproof connection.
See video: https://www.youtube.com/watch?v=iVJGQ24PSgQ (if blocked try vimeo!)

Great product gives you Super Bright lights that are visible over several hundred meters even in bright sunlight especially if you replace the green light with white, it also flashes when the battery is getting down to minimum.

NOTE: I would recommend balance charging batteries used with this product as it does cause Cell #1 to get out of balance with the other cells if you don't.

The benefits of using it far outweighs the inconvenience of always balance charging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product gives you Super Bright lights that are visible over several hundred meters even in bright sunlight especially if you replace the green light with white, it also flashes when the battery is getting down to minimum.

NOTE: I would recommend balance charging batteries used with this product as it does cause Cell #1 to get out of balance with the other cells if you don't.

The benefits of using it far outweighs the inconvenience of always balance charging.

I bought this for my BW260, It works great. LEDs are highly visible even in broad daylight. LED will blink faster to indicate low level battery voltage. I use this with a 3S battery by the way.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for my BW260, It works great. LEDs are highly visible even in broad daylight. LED will blink faster to indicate low level battery voltage. I use this with a 3S battery by the way.

I Tested this low voltage alarm on a 3 cell li po battery and it worked fine. it has a three pin plug on it so it only monitors 2 cells i beleive. the leds started to flash rapidly when the voltage dropped to 3.8 volts . i now have it fixed to a piper cub and hope to have some long flights soon as the wheather improves.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Tested this low voltage alarm on a 3 cell li po battery and it worked fine. it has a three pin plug on it so it only monitors 2 cells i beleive. the leds started to flash rapidly when the voltage dropped to 3.8 volts . i now have it fixed to a piper cub and hope to have some long flights soon as the wheather improves.

Customer files
No File Name Download [1957]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!