Stati Uniti
Shipped From:
  • UK
  • United States (US)
  • Global
  • Australia (AUS)
  • EU

Turnigy Talon Hexcopter (V1.0) fibra di carbonio Telaio - 625 millimetri

Turnigy Talon Hexcopter (V1.0) f...

Il telaio Turnigy Talon V1.0 Hexcopter è realizzato in alta qualità vera fibra di carbonio che offre sia i grandi sguardi e le prestazioni. I nostri ingegneri hanno cercato di creare una cornice Hexcopter senza compromessi, diversi materiali sono...

Now save risparmia 12,95 € 12,95 €

Special Price 51,83 € 51,83 €

Now save risparmia 12,95 € 12,95 €

Was  64,78 €


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


Il telaio Turnigy Talon V1.0 Hexcopter è realizzato in alta qualità vera fibra di carbonio che offre sia i grandi sguardi e le prestazioni. I nostri ingegneri hanno cercato di creare una cornice Hexcopter senza compromessi, diversi materiali sono stati testati e rifiutati fino a quando hanno deciso che solo vera fibra di carbonio avrebbe incontrato gli obiettivi che ci eravamo prefissati di raggiungere. Ogni componente è stato pesato e misurato la rasatura semplici grammi dove è possibile raggiungere un peso leggero ma struttura estremamente rigida. Non abbiamo permettere compromessi e non si dovrebbe.

La capacità di sollevamento aggiunto di una configurazione esagonale rende questa cornice ideale per trasportare carichi più grandi come sistemi di telecamere e altri componenti elettronici. Questo rende per una piattaforma fotocamera eccezionale o semplicemente una struttura multi-rotore molto agile e potente per acrobazie!

Il Talon Hexcopter è costruito dagli stessi componenti di alta qualità che vengono utilizzati nella popolarissima cornice Talon V2 Quadcopter, ma abbiamo ri-progettato il telaio principale per l'utilizzo in una configurazione esagonale.

Durante lo sviluppo del V2 Talon la nostra squadra ha preso il telaio già popolare Talon e ha studiato la progettazione, in base al feedback da parte della comunità multi-rotore e le nostre idee abbiamo ri-progettato piastre che consentono il montaggio superiore o inferiore del 28 e 35 montaggio del motore I motori brushless outrunner dimensioni (vedi foto di riferimento di diverse opzioni di montaggio). Il sistema di bloccaggio migliorato da solo ha subito 3 riprogettazioni fino ai nostri ingegneri sono stati soddisfatti che la forza perfetta e il peso combinazione di risparmio erano stati raggiunti. Il sistema di bloccaggio telaio centrale è stato quasi raddoppiato per garantire un forte rinforzo su ogni braccio. Ogni aspetto di questo telaio è stato accuratamente esaminato e pensiero attraverso.

Tutta questa attenzione ai dettagli ha portato l'elegante semplicità che è il Talon Hexcopter, una struttura esagonale che siamo orgogliosi di mettere il nostro nome dietro come si sarà di possedere.

Offriamo inoltre una linea completa di elettronica di qualità multi-rotore come scheda multi-rotore di controllo, ESC, motori e di più, quindi non c'è bisogno di rinunciare alla propria configurazione elettronica sia!

Peso: 440g (w / out elettronica)
Larghezza: 625 millimetri
Fori motore Bolt: 16/19 / 25mm

28-XX o 35-XX motore brushless outrunner x 6
18 ~ ESC brushless 25A x 6
8x4 ~ dell'elica 10x4.7 x 6 (3 rotazione standard / 3 retro)
scheda di controllo multi-rotore
2500 ~ 3300mAh 11.1V LiPoly
4CH trasmettitore e ricevitore


Ulteriori informazioni

  • Conte lama:
  • Diametro X (pollici):
  • SKU
  • Watt Hour
  • Peso (g):
  • Lunghezza:
  • Larghezza
  • Altezza

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati

Looks very good quality and sturdy but I haven't built it yet.
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
Good workmanship, everything fits well and is quickly assembled.
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

-No instructions
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
View all reviews
  • Turnigy Talon Hexcopter Frame

Upload video

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.