New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Trackstar 1 / 10th 60A Sensored / Sensorless auto ESC

Turnigy Trackstar 1 / 10th 60A Sensored / Sensorless auto ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
9052000031
WANT FREE SHIPPING? Click here to find out more!
Il Turnigy Trackstar 1 / 10th 60Amp scala auto ESC è l'ultima aggiunta alla gamma Hobby Re Car ESC. Utilizzando un veloce Silicon Labs MCU e di alta qualità on-Semiconductor MOSFET il Trackstar 60A ESC stabilisce un nuovo standard in alta qualità ancora CES auto a prezzi accessibili. Con la logica intelligente MCU CES serie Trackstar hanno la capacità di supportare entrambi i motori sensored e sensorless, permettono estremamente preciso start up di controllo e avanzamento di posizionamento indietro dal motore. Questo si traduce per iniziare molto liscia e l'accelerazione.

Il Turnigy Trackstar 60A ESC vanta anche una serie di opzioni di programmazione di solito non si trovano in un / ESC scala 10 1 a questo prezzo e può essere programmato con facilità tramite la scheda di programmazione Turnigy Trackstar (venduto separatamente) Il Turnigy Trackstar 45A ESC include anche 3 x fili 14AWG motore e 2 fili di ingresso dell'alimentazione x 14 AWG.

Specifica:
Cont. Corrente: 60A
Burst corrente: 100A
Auto Dimensione: 1 / 10th
Batteria: 2-3 cella Lipo
S-BEC: Uscita 5.0V / 2A
Tipo motore: Sensored o Sensorless Brushless (6.5turn 2s, 3s 10.5turn - o superiore)
Dimensioni: 40,5 x 37,5 x 24 millimetri
Peso: 45g
Batteria Spina: Richiesto
On / Off:
Reverse:
Protezione sovraccarico termico:
Battery Terminals: dimensioni 14AWG
Morsetti del motore: dimensioni 14AWG

Opzioni di programmazione: (tramite carta di programmazione opzionale)
Tensione Tagliare
Trascinare Brake
Forza freno
controllo Punch
tipo di inversione
Timing motore  
  • SKU 9052000031
  • Brand TrackStar
  • Capacità ( mAh ) -
  • Peso 150.0000
  • Lunghezza 140.00
  • Packaging Width 50.00
  • Altezza 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Not a bad ESC, works well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad ESC, works well.

Overheat protection cuts the power of my motor after 5 minutes but for the price, it's a great product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overheat protection cuts the power of my motor after 5 minutes but for the price, it's a great product

Bought one of these to use with a Turnigy 10.5t sensored motor and 2S battery.
The first one i got only lasted for 2 runs and it burned my motor.... bought another identical motor thinking that was the problem, but as soon as i turned it on, the esc got incredibly hot, it burned my hand... started smelling like burned plastic, wouldn't turn the motor at least once.
Got a replacement esc and it's been working perfect for over 4 months now, in my Sakura D3 drift car... nothing to complain about; the fan still works, even though it accumulates dust, the li-po cut off kicks in every single time at the specified voltage, doesn't get hot, very easy to program via both Tx and programming card.
Haven't tested it on 3S yet, but there shouldn't be any problems.
So... all in all ... even though i received a faulty esc the first time, it turned out this is a great quality product and i would recommend it to anyone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought one of these to use with a Turnigy 10.5t sensored motor and 2S battery.
The first one i got only lasted for 2 runs and it burned my motor.... bought another identical motor thinking that was the problem, but as soon as i turned it on, the esc got incredibly hot, it burned my hand... started smelling like burned plastic, wouldn't turn the motor at least once.
Got a replacement esc and it's been working perfect for over 4 months now, in my Sakura D3 drift car... nothing to complain about; the fan still works, even though it accumulates dust, the li-po cut off kicks in every single time at the specified voltage, doesn't get hot, very easy to program via both Tx and programming card.
Haven't tested it on 3S yet, but there shouldn't be any problems.
So... all in all ... even though i received a faulty esc the first time, it turned out this is a great quality product and i would recommend it to anyone.

I hooked this esc up to a Trackstar 13.5 and it rocks. I race indoors and will have to turn it down, awesome power. This and the 13.5 are a great combo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I hooked this esc up to a Trackstar 13.5 and it rocks. I race indoors and will have to turn it down, awesome power. This and the 13.5 are a great combo.

I can recommend this ESC. I have used it in a Losi XXX-SCB with the 13T motor (PRODUCT ID: 3650-13T) and the programming card (PRODUCT ID: TTS-Prog), and it works very well. Didn't get warm after some heavy bashing. The SCB pops wheelies with stock gearing! Looking forward to testing it on the track. Will be trying the 100A version very soon...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can recommend this ESC. I have used it in a Losi XXX-SCB with the 13T motor (PRODUCT ID: 3650-13T) and the programming card (PRODUCT ID: TTS-Prog), and it works very well. Didn't get warm after some heavy bashing. The SCB pops wheelies with stock gearing! Looking forward to testing it on the track. Will be trying the 100A version very soon...

Customer files
No File Name Download [679]
No File Name Download [898]
No File Name Download [614]
No File Name Download [623]
No File Name Download [565]
No File Name Download [696]
No File Name Download [524]
No File Name Download [725]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save