New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Trackstar una cella 120A 1/12 e 1 / 10th scala Sensored Brushless auto ESC

Turnigy Trackstar una cella 120A 1/12 e 1 / 10th scala Sensored Brushless auto ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
TTS-120A-1S
WANT FREE SHIPPING? Click here to find out more!

A corto di vendita è stato $ 59,99 ora solo 39,99 $ solo fino ad esaurimento scorte!

Il Turnigy Trackstar una cella 1/12 e 1 / 10th scala ESC è l'ultima aggiunta alla gamma Hobby Re Sensored Car ESC.

Il Trackstar una cella dotato di un booster di tensione per uso singola cella Lipoly in 1/12 e 1 / racing scala 10 °. Una ventola del dissipatore di calore e raffreddamento supplementare sono stati inclusi per 2S 1 / applicazioni di gara 10 ° rendendo il Trackstar una cella un vero e versatile ESC.

Utilizzando un veloce Silicon Labs MCU e di alta qualità on-Semiconductor MOSFET il Trackstar una cella 120A ESC stabilisce un nuovo standard in alta qualità ancora CES auto a prezzi accessibili. Con la logica intelligente MCU CES serie Trackstar permettono estremamente preciso avviare il controllo e avanzamento di posizionamento indietro dal motore. Questo si traduce per iniziare molto liscia e l'accelerazione.

Timing indicatore LED.
Per garantire la conformità con le regole di regata Sportivo Classe di Roar e assistere organizzatori della gara di monitorare il rispetto conducente classi di gara non temporizzazione modificato il Trackstar 1 / 10th ESC include un indicatore di modalità di temporizzazione LED. In ogni momento quando l'ESC è acceso e temporizzazione dinamiche del motore è impostata su un valore maggiore di zero il LED bianco si accende per indicare che la modalità di temporizzazione è stata modificata.

Il Turnigy Trackstar una cella 120A ESC vanta anche una serie di opzioni di programmazione di solito non si trovano in un ESC a questo prezzo e può essere programmato con facilità tramite la scheda di programmazione Turnigy Trackstar (venduto separatamente).

Specifica:
Cont. Current: 120A
Burst corrente: 200A
Motore di rotazione: Fwd / Rev o Fwd / Brk
Potenza assorbita (Celle): 1-2S LiPo / LiFe, 3-6 NiMH (8.4V max)
Tipo motore: Sensored e sensorless motori brushless.
BEC Uscita: 6.0V, 1Amp, Built-in BEC con DC di richiamo per l'uso LiPo 1 cella.
LED di stato (2 LED): LED bianco, 3 LED di colore (rosso, verde e arancione)
Protezione sovraccarico termico:
Dimensioni (L * W * H / senza ventilatore): 36.5 * 42 * 18mm (1,44 * 1,65 * 0.71in)
Peso (senza fili): 34g (1,20 once)

Limiti motore
1S LiPo o NiMH 3-4s): ≥3.5T (1/12 road on)
2S LiPo o NiMH 5-6S): ≥4.5T (1/10 on-road) ≥6.5T (1/10 off-road) *

Opzioni di programmazione (tramite carta di programmazione opzionale o ingresso della valvola a farfalla)
Freno / tipo inverso
importo del freno
importo Reverse
controllo Punch
Trascinare Brake
Throttle Banda morta
Tensione Tagliare
Timing motore

Nota: * uso 2S Lipoly richiede l'installazione del dissipatore di calore fornito e ventilatore.

  • SKU TTS-120A-1S
  • Brand TrackStar
  • Capacità ( mAh ) -
  • Peso 180.0000
  • Lunghezza 0.00
  • Packaging Width 0.00
  • Altezza 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

Top Flight ESC for 1/4 the money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top Flight ESC for 1/4 the money!

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

works great in my mardave on 1s lipo no prob

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great in my mardave on 1s lipo no prob

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

  1. 1
  2. 2
Customer files
One Cell Manual Download [689]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!