Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Turnigy V-Bar 600 Flybarless System (v3)

Turnigy V-Bar 600 Flybarless System (v3)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
249 g
SKU:
T-VBar600
Descrizione
prodotto

Il Turnigy® V-Bar 600 (v3) è un controller preciso qualità estremamente elevata e stabilizzatore per il rotore piatto oscillante e la coda di un sistema di controllo di volo modello di elicottero. Ha super-stabilizzazione e l'ingresso altamente reattivo da controllare. Questo rende per un'incredibile stabilità e agilità. La programmabilità consente impostazioni delle prestazioni di scala regolare pratica dello sport o difficile volare in 3D. Flybarless significa anche tempi di volo più lunghi e una enorme riduzione di parti e resistenza aerodinamica. Non è più necessario utilizzare un giroscopio di coda esterna, con conseguente riduzione dei risparmi di peso e di costo. Il Turnigy® V-Bar 600 dispone di 4 modalità di volo commutabili.
In bundle con il sistema V-Bar è una scatola di programmazione. Fare installare un esperienza indolore.

Specifica:
MEMS Gyro I sensori a tre assi
processore di segnale digitale
Tensione di funzionamento: 4-10 Volt, corrente <80mA
Campo di temperatura: -10 ° C a + 50 ° C
Dimensioni: 33x34x18mm
Peso: 15g
Compatibilità Servo: 1520uS / 333Hz, 1520uS / 250Hz, 1520uS / 167Hz e servi digitali 760us / 333Hz, servo 1520uS / 71Hz analogico.

Incluso;
Turnigy® V-Bar 600 (v3) Sistema Flybarless
programmazione Box LCD
Double-sided schiuma adesiva e piastra in acciaio inox.

Product
Specifications

Ulteriori informazioni

  • SKU:
    T-VBar600
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    249.00
  • Lunghezza:
    193.00
  • Larghezza:
    55.00
  • Altezza
    140.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Mine came with a the picth channel dead. The Hobby King returning product policy is kind of is not friendly, and in the country where Im now, will cost about the half of the product cost to send it back. And nothing guarantees me that after spending that sending back shipping cost, I will have a functional replacement. They can blame it on me. So next time I will be more carefull about buying only cheap items from HK, or if I buy something expensive, that it should be something that I can repair in case of a damaged product. Thanks Hobbyking for my lost $100.00...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow, it is $50 off from $139.99.

I guess its sale affected by the newer, cheaper Tarot ZYXs, CopterX, Helicox...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Takes a lot of work to get it working right but its well worth it. The servo leads need to be maybe 10-20mm longer for cleaner installs. And wish there was more support out there for this unit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It took me several times of setup and tuning I finally got it working on a HK-450-Pro. It runs fine. I used the "High-Quality FBL Flybarless Head for T-Rex and HK450 heli" as the FBL rotor-head.
Some problems you should know:
1) there is sometimes a start-up glitch, one servo will be driven to maximum and it won't move the swashplate correctly. If this happens disconnect battery and re-start. always check that it initialized properly before take-off otherwise you will crash bad.
2) I had problems with the unit acting unstable. it would wobble, or be hard to control. This was because I used too much foam-tape for the control box mount and mounted using the metal plate sandwich in between other foam tape. The control box was moving relative to the helicopter frame. I removed all the foam tape and used only one piece of rigid (firm) foam tape and the behavior is much better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Das System ist nur Elektronikschrott, und dafr habe ich noch Steuern bezahlt. Habe mich tagelang intensiv damit beschftigt und verstehe jetzt auch die Wirkung der Einzelnen zahlreichen Parameter. Die stabilisierende Wirkung ist auch bei vollem Gain unzureichend, einfaches Schweben ist nicht mglich. Ich kaufe mir jetzt ein von Kollegen erprobtes microbeast, das kostet auch nicht mehr. Finger weg von Turnigy Vbar 600. Die Recensionen sind wahrscheinlich alle getuerkt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Now running two. 1 on a HK500 and 1 on a Trex600n
Tricky setting up but once you get to no the unit its simple.
Hard 3D is very good and very fast, hovering is not as good as Fly bared
But for the Price. IT CANT BE BEAT. ******
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine worked for about a month, then the aileron gyro stopped responding, and caused a minor blade strike on my 500 gt, luckily no damage. This happened suddenly, no crashes, no hard landings, just no gyro compensation on aileron axis. Elevator and rudder gyros still respond normally. Tried everything but still the same. Sent back to HK but no word yet...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tricky product, over all. I wish to mention some tune up aspects because the manual is full of folklore that have nothing to do with the reality:

1.Feel free to use the sub-trims to adjust the aile and elev correct geometry, and leave them in that position (never reset them to zero at the end).

2.Put the aile and elev mixing ratio at 100pcnt in your Tx and then use the CICL-LMT to adjust the correct value of cyclic pitch: increase then the Tx aile/elev stick resolution to maximum travel using the Dual Rate function in your Tx (I reduced the curve to ~ 50pcnt in order to expand the joystick travel to the maximum).

3.Perform the TX CALIBRATION in Primary setup mode for all SWPL TRIM CALIBR, SWPL LOW CALIBR and SWPL HIGH CALIBR. Doing only the SWPL TRIM CALIBR in Primary setup mode makes the life more complicate and what you get is zero. After performing all the TX CALIBRATION in Primary setup mode the unit commutes automatically in normal flying mode anyway.

4.AUTOTRIM seems to be common for all 4 flight modes, what you do in 1 is then reflected in the rest of 3. The difference between flying modes is done by the parameters you setup for each one, the auto learning" function is the same. The auto learning" function seems to be a myth too, on True mode you are allowed to teach the unit how to fly correct using the Tx trims! Once you commute on False again, th
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mounted in my HK450PRO. Using HK-MG929 for ciclyc and Turnigy D480 for tail.
I'm impressed with this system. Tail like a rock. Super stable and usefull.
I recomend to read how to setup at helifreaks because this is not difficult to do if you know how. My skill flying is sport fly and this system works perfect, and I've readen that works perfect for 3D too.
Thanks HK to sell afordable products with this quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
?hat is most good I have seen so far.WORKS EXCELLENT no problem.and the tail is the best I have seen.Colleague must be read the manual,does not expect to do everything default.bought another which you want with too many dollars,who will work the same.
?he test on a t-rex 450 V2
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.