Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

TURNIGY tensione Booster per Servo & Rx (1S a 5V 1A)

Generating Links

TURNIGY tensione Booster per Servo & Rx (1S a 5V 1A)

Prezzo:

Now save risparmia 0,00 € 0,00 €

3,41 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
DMDL-VBoster
Spedizione gratuita? Clicca qui per saperne di più!
LiPoly richiamo tensione di cella singola per i ricevitori e servi.
Questa piccola unità si collega al singolo LiPoly cellulare e aumenterà la tensione di 5V, che consente di eseguire un ricevitore su una singola cella di lipo!
Perché vorresti farlo? Meno peso, naturalmente!
Questo piccolo elevatore di tensione pesa solo 2.9g con filo e spina e perni a figura intera. È costruito su un circuito stampato flessibile (dello stesso tipo usato nel telefono cellulare per controllare lo schermo) quindi è molto leggero, flessibile e sottile. Rimozione dei fili e spina più tagliare i perni giù ridurrà il peso di un ulteriore .6g!
Tensione di funzionamento: 3.2V - 4.2V
Corrente di funzionamento: 1A
Max corrente di funzionamento: 1.5A
Peso: 2.9g
 
Attenzione Fate attenzione alla polarità di tappi e mai utilizzare più di una singola cella lipo per alimentare il survoltore.
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

guito | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 12, 2016

buena opcion para el dlg, minimo peso, compre dos de estos y funcionan perfectamente

Tom | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 02, 2016

Works well and suited my needs. very tiny and it is flexible.
HobbyKing shipped fast and was packaged well with my other items.
Thanks :)

Eric | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 03, 2015

I have installed one in the mini-DLG and combined with a Turnigy 1s Nanotech 600mah battery in puts the C of G in exactly the right place . The 5 volt output supplies an Orange receiver without case and 3 servos . I agree that the PCB board is thin but it is strong enough for the job . Excellent little device.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 13, 2015

Sehr praktisch um aus 1s Lipo 5v zu machen ich verwende es in einem DLG-Segler und es funktioniert super

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 08, 2015

These are very nice, small voltage boosters. I have had one that needs to be soldered onto the positive and negative lead of the esc and the other where it just plugs into the esc.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 01, 2015

looks good quality. i hope to use this when indoor season starts

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 30, 2015

I purchased this Booster to use in a small DLG it is simple and simply works. It helped me keep the weight down and performance up. Very satisfied with the results.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 06, 2015

works good but on the thin side a little brittle

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2014

Guter Step-up Volatge Booster ideal um Reciver auch nur mit einer Lipo Zelle zu Versorgen

o0Jack0o | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 20, 2014

MAKE NOTE this circuit board is flexible.
Fist flight using this did a face plant and popped a circuit tracer right off the board (the one right by the power where the transister is soldered to the board). Managed to scrap it an poke a hole for the solder to stick and it worked.
Great product, works as expected, used it many many times now and no problems since.
Recommended

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
File dei clienti
boosterwithswitch Download [58]
dcbooster.jpg Download [397]
Side view Download [807]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!