New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

TURNIGY tensione Booster per Servo & Rx (1S a 5V 1A)

TURNIGY tensione Booster per Servo & Rx (1S a 5V 1A)

Discontinued Product

Please continue searching for a similar product.
SKU:
DMDL-VBoster
WANT FREE SHIPPING? Click here to find out more!
LiPoly richiamo tensione di cella singola per i ricevitori e servi.
Questa piccola unità si collega al singolo LiPoly cellulare e aumenterà la tensione di 5V, che consente di eseguire un ricevitore su una singola cella di lipo!
Perché vorresti farlo? Meno peso, naturalmente!
Questo piccolo elevatore di tensione pesa solo 2.9g con filo e spina e perni a figura intera. È costruito su un circuito stampato flessibile (dello stesso tipo usato nel telefono cellulare per controllare lo schermo) quindi è molto leggero, flessibile e sottile. Rimozione dei fili e spina più tagliare i perni giù ridurrà il peso di un ulteriore .6g!
Tensione di funzionamento: 3.2V - 4.2V
Corrente di funzionamento: 1A
Max corrente di funzionamento: 1.5A
Peso: 2.9g
 
Attenzione Fate attenzione alla polarità di tappi e mai utilizzare più di una singola cella lipo per alimentare il survoltore.
  • SKU DMDL-VBoster
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 9.0000
  • Lunghezza 60.00
  • Larghezza 9.00
  • Altezza 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

buena opcion para el dlg, minimo peso, compre dos de estos y funcionan perfectamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

buena opcion para el dlg, minimo peso, compre dos de estos y funcionan perfectamente

Works well and suited my needs. very tiny and it is flexible.
HobbyKing shipped fast and was packaged well with my other items.
Thanks :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works well and suited my needs. very tiny and it is flexible.
HobbyKing shipped fast and was packaged well with my other items.
Thanks :)

I have installed one in the mini-DLG and combined with a Turnigy 1s Nanotech 600mah battery in puts the C of G in exactly the right place . The 5 volt output supplies an Orange receiver without case and 3 servos . I agree that the PCB board is thin but it is strong enough for the job . Excellent little device.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed one in the mini-DLG and combined with a Turnigy 1s Nanotech 600mah battery in puts the C of G in exactly the right place . The 5 volt output supplies an Orange receiver without case and 3 servos . I agree that the PCB board is thin but it is strong enough for the job . Excellent little device.

Sehr praktisch um aus 1s Lipo 5v zu machen ich verwende es in einem DLG-Segler und es funktioniert super

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr praktisch um aus 1s Lipo 5v zu machen ich verwende es in einem DLG-Segler und es funktioniert super

These are very nice, small voltage boosters. I have had one that needs to be soldered onto the positive and negative lead of the esc and the other where it just plugs into the esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are very nice, small voltage boosters. I have had one that needs to be soldered onto the positive and negative lead of the esc and the other where it just plugs into the esc.

looks good quality. i hope to use this when indoor season starts

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks good quality. i hope to use this when indoor season starts

I purchased this Booster to use in a small DLG it is simple and simply works. It helped me keep the weight down and performance up. Very satisfied with the results.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this Booster to use in a small DLG it is simple and simply works. It helped me keep the weight down and performance up. Very satisfied with the results.

works good but on the thin side a little brittle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works good but on the thin side a little brittle

Guter Step-up Volatge Booster ideal um Reciver auch nur mit einer Lipo Zelle zu Versorgen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Guter Step-up Volatge Booster ideal um Reciver auch nur mit einer Lipo Zelle zu Versorgen

MAKE NOTE this circuit board is flexible.
Fist flight using this did a face plant and popped a circuit tracer right off the board (the one right by the power where the transister is soldered to the board). Managed to scrap it an poke a hole for the solder to stick and it worked.
Great product, works as expected, used it many many times now and no problems since.
Recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

MAKE NOTE this circuit board is flexible.
Fist flight using this did a face plant and popped a circuit tracer right off the board (the one right by the power where the transister is soldered to the board). Managed to scrap it an poke a hole for the solder to stick and it worked.
Great product, works as expected, used it many many times now and no problems since.
Recommended

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
boosterwithswitch Download [58]
dcbooster.jpg Download [397]
Side view Download [807]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!