Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy ™ TGY-210DMH Coreless w / dissipatore di calore DS / MG Servo 3,9 kg / 0.13sec / 16g

Generating Links

Turnigy ™ TGY-210DMH Coreless w / dissipatore di calore DS / MG Servo 3,9 kg / 0.13sec / 16g

Prezzo:

Now save risparmia 0,00 € 0,00 €

19,43 €
Quantità:
Spedito da:
  • USA
  • Global
Già acquistato
Stato:
disponibile
SKU:
9122000009
Spedizione gratuita? Clicca qui per saperne di più!

Specifiche tecniche:
Peso: 16 grammi
Dimensioni: 23 x 12 x 25.4 mm
Coppia @ 4.8V: 3,1 kg / cm
Coppia @ 6.0V: 3,9 kg / cm
Velocità @ 4.8V: 0.15 sec / 60 ° a vuoto
Velocità @ 6.0V: 0,13 sec / 60 ° a vuoto
Equipaggiamento: Metal Gear / Dual ball bearing
Motore: Coreless

  • Servo Coppia ( kg) ( min . 0.01kg ) 3.90
  • Servo Velocità ( Sec / 60deg ) 0.13
  • Servo A ( mm ) 29.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 26.00
  • Servo D ( mm ) 12.00
  • Servo E ( mm ) 33.00
  • Servo F ( MM ) 20.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Registrati per scrivere recensioni, per favore accedi o registrati

vlaporte | Acquirente verificato

  • Quality
  • Overall
  • Value

Excellent for Trex 450 PRo

Jul 02, 2020

I have used Turnigy TGY-212 and TGY-210 servos for my Trex 450 Pro DFC heli for about 4 years. The only failure was a pilot error crash which broke one of the 3 head servos. These servos are fast and strong. They are hard to find currently. I use them with K-BAR yellow 3 axis gyro.
vlaporte

Robin | Acquirente verificato

  • Overall
  • Value
  • Quality

Great Servo

Oct 07, 2019

This is a very good quality servo. I will buy more

jiggle and bind | Acquirente verificato

  • Value
  • Quality
  • Overall

servo

Aug 26, 2019

these are the blue bird, nxt servos used in PA planes. very strong, but slop develops on center quickly. I think i've had trouble with gears catching. very troublesome.

servo | Acquirente verificato

  • Value
  • Quality
  • Overall

HK 450 helicopter parts

Aug 04, 2019

great item

John | Acquirente verificato

  • Value
  • Quality
  • Overall

Great servo for tricopter

Mar 12, 2019

Yeup. Great little servo for tricopter, easily puts out the torque to spin the motor.
Its a little pricey, but, you definitely feel the quality when you unpack it.
CHECK: make sure before you connect it to anything, you check that its centered. myn came with an issue where it doesn't have end stops, so it could just keep rotating in any direction, not an issue and when it connects, it doesn't move any more then a normal servo. But make sure its centered before you connect anything to it.

Jason | Acquirente verificato

  • Overall
  • Value
  • Quality

Nice

Oct 12, 2018

At first I was like 20 for a servo but when you use it its great. I use it one my tricopter and its great and super locked in.

Stef | Acquirente verificato

  • Value
  • Quality
  • Overall

High quality

Sep 22, 2017

Direkt im hohenleitwerk eigebaut auf einen 4.5m segler 7kg.Kein spiel.

look4one | Acquirente verificato

  • Quality
  • Overall
  • Value

Watch out for the LOW rotating torque

May 05, 2017

These servos look very nice, have metal gears and center accurately. They also have a quick transit time and a fairly strong holding torque, but the rotational torque is quite a bit lower. I can hold the output arm and easily prevent it from rotating. But once the servo reaches a commanded position, it is quite difficult to push the arm off position. We tried to use these servos in elevators for the 48" 3D planes weighing from 2.5 to 4.5 lbs. The servos will hold a position, but they cannot reliably move to a new correct position. This produces wild uncontrolled aerobatics due to elevator servo soft failure. We are trashing about five of these due to the reliability failure. I cannot understand why a digital servo would be designed with different torque levels for the HOLD vs. the ROTATION. This seams to be the ultimate in specsmanship when your product is not competitive. I miss the analog servos with the soft centers and firm rotation torque.

Novice-9 | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 09, 2016

These are great servos. Bought 4 and used in pa bandit. very precise centring and quick response, work well with extension arms for large deflection. A little noisy but doesn't affect performance. had 12 flights so far.

Jarco | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jan 20, 2016

What a great servo! It is very good for an rcexplorer tricopter, check thizz:
https://www.youtube.com/watch?v=z4YTLWj8_GA

  1. 1
  2. 2
  3. 3
  4. 4
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!