Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

Turnigy ™ XGD-11MB mini DS Servo 2.2kg / 0.12sec / 11g

Turnigy ™ XGD-11MB mini DS Servo 2.2kg / 0.12sec / 11g

QTY:

Now save risparmia 0,00 € 0,00 €

4,44 €
Stock:
Peso:
23 g
SKU:
9378000004

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Turnigy mini servo digitale che offre una buona coppia, velocità, eccellente centratura e un ottimo prezzo!

Il treno di ingranaggi è ballraced e tutti i metalli.

Specifiche:
Peso: 11g
Dimensione: 23.1mmx12.0mmx24.9mm
Coppia: 2.2kg.cm (4.8V) - 2.5kg.cm (6.0V)
Velocità: 0.12sec / 60deg (4.8V) - 0.10 sec / 60deg (6.0V)
Tensione: 4.8-6.0v
Tipo: Micro Digital
Treno di ingranaggi: Meta l
Cuscinetto a sfere:
Collegare: JR / Futaba

Product
Specifications

Ulteriori informazioni

  • SKU:
    9378000004
  • Brand:
    Turnigy
  • Peso (g)
    23.00
  • Lunghezza
    100.00
  • Larghezza:
    25.00
  • Altezza:
    90.00
  • Velocità ( Sec / 60deg )
    0.10
  • Coppia ( kg) ( min . 0.01kg )
    2.50
  • Unit Weight (g):
    11
  • A ( mm ):
    29.00
  • B ( mm )
    23.00
  • C ( mm )
    26.00
  • D ( mm ):
    12.00
  • E ( mm ):
    32.00
  • ( Mm ) F
    15.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good servo ordered it twice, and sent a very different Turnigy XGD-10HM 2.2kg / 10g / 0.12 was not very nice .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
pour le nouveau numero il n'est pas indiqu qu'il est digital ou pas
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have no complaints for these servos. They have done their job fantastically.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am running them in a "Hobbyking/Skywing EPP Mini Sbach 342" (38" 700g AUW) & they handle some abuse just fine, really nice little servos. They are accurate, center well, smooth & strong. Maybe its just me but they seem to have a little less angle/throw than other servos... Anyhow I think there my new favorite in this size.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are okay and will do the job. i bought 4 of these and one didnt center correctly and it got warm so i removed it. There two did fine in my Edge 540T epp but striped out doing an aggressive blender. Over all they do the job but if your planing to fly you plane hard DO NOT USE THESE.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought these to replace the servos in my Cloud FD4 two of which had failed one with a stripped gear and one which had a lump of debris inside. They work fine in the FD4 but recently I jammed one of them while working on a bomb door mechanism for another model. It seemed to have stripped the gears which I could not believe as they are metal, when I took it apart the gears were fine but it had ripped the final gear shaft out of its plastic housing in the case ( the one next to the output). there was only about 1/16" of the shaft proud of the gearwheel which I think should have been longer and should also be in a metal bush as the last two gears are metal.
A good servo let down by a design fault, but I suppose I should not have let it jam.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought this to use as a "roll servo" on a apm controlled inline gimbal. very tight-zero slop but compared to other digital servo's Ive used (including the micro version of this brand Im using for the "Tilt servo" on the same gimbal) it has quite a high degree of judder/lurching when moving, which obviously isnt ideal if your chasing smooth gimbal'ed video. It would work well for control surfaces on fixed winged but definetly avoid if you want smooth millimetre precision movement, think Ill swap it out for another micro the same as the tilt as thats so smooth its almost as good as a mid-high end brushless gimbal motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great servo! works perfectly in all of my mid size airplanes, never had any problems with the four that I bought. Noticeably more torque than other micro servos out there.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far so good. Bought 2 for rudder and elevator in my super kinetic and they seem to be pretty strong with little to no slop. Problem is, only 2 gears are metal but there is a pretty decent bearing supporting the output gear so hopefully they hold up.
-tayze
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servo's fit perfectly into the HK250GT. There is next to no slop in the metal gears and the heli flies sweet. Confirmed as working with the Tarot ZYX-S2
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy XGD-11MB Digital Mini Servo

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.