Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global

Due LED PCB Strobe verde e continuo Bianco 3.3 ~ 5.5V

Due LED PCB Strobe verde e continuo Bianco 3.3 ~ 5.5V

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
16 g
SKU:
381000016
Descrizione
prodotto

Questo PCB LED dotato di un LED lampeggiante verde e un LED bianco continuo. Questi LED sono ultra-luminoso e facile da usare. Basta montare il PCB al modello e collegare il conduttore di una fonte di alimentazione ~ 5.5V DC 3.3. Dispone di una spina di stile JR pre-installato per una facile "plug and play" compatibilità con la maggior parte dei ricevitori standard.

Specifiche:
Alimentazione: 3,3 ~ 5,5 V DC
Consumo di corrente, ON Modalità: 25mA
Corrente assorbita, OFF Modalità: 1mA
Controllo ON / OFF: PWM, 1520uS
Colori: Verde / Bianco
Dimensioni: 51x18x7mm
Peso: 6g

Product
Specifications

Ulteriori informazioni

  • SKU:
    381000016
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    16.00
  • Lunghezza:
    55.00
  • Larghezza:
    10.00
  • Altezza
    20.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Iv made two orders of this in green and red. First order works just fine. If you try to make the one led constant it burns out, so there not as good as the flytron's.

Second order they don't work. Leds look deformed ore like they melted. There's one flash apone power, but wont work more then that.

So i have to give them a 50/50.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Produto defeituoso. Os leds no funcionam quando liga no tx. Parece um problema no circuito, pois os leds ligam quando ligamos direto.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very bright. Signal cable was not soldered in, but otherwise very good :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great thought but I ordered two of these and they did not work the way it states in the website. Some investigation finds that there are two jumper pads to solder to keep an LED constant on however I've found my main control chip in the center to heat up MUCH more than normal if I bridge that solder gap.

That said, I'm going to keep both LEDs flashing to keep heat and power use down. Looks cool either way...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Regarding the LED's behavior, you can choose which one blinks and which stays lit by bridging the jumper right next to the upper LED leg (if bridged, stays lit).
See files tab for pic.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Both led are strobe, no solid white or red, as advertised, therefor only four stars.

Led are bright and good visible by nightfall.

You can turn led on and off by external channel on your transmitter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just like to say as you can see in the pic , wire connections C G (control, Live , Ground) are incorrect for JR. Just need to reverse red and black wire in plug, use 3 pins, lift all 3 locks up and pull wires out of plug, reverse them - easy. Nice strobe and all bright. I have only powered (4.8v) them up without receiver so I expect the white wire will control function via TX.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just added these to my mqx quad, very bright LEDs I can't look at the white light for very long. I bought these for orientation on my quad I have one pulsing red on order, and judging by the brightest of the ones which I've installed I'm sure these are just what I was looking for. Probably about my 5th or 6th order from hk and I am both impressed with the items and the service which I have received.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These LED lights are super bright!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are fantastic when i first plugged it into my receiver to test it, i was almost blinded by the white light and strobe, unbelievably bright...very nice i will get more
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Two LED PCB Strobe Green and Continuous White 3.3~5.5V

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.