Questo PCB LED dotato di un led lampeggiante rosso e un LED bianco continuo. Questi LED sono ultra-luminoso e facile da usare. Basta montare il PCB al modello e collegare il conduttore di una fonte di alimentazione ~ 5.5V DC 3.3. Dispone di una spina di stile JR pre-installato per una facile "plug and play" compatibilità con la maggior parte dei ricevitori standard.
Alimentazione: 3,3 ~ 5,5 V DC
Consumo di corrente, ON Modalità: 25mA
Corrente assorbita, OFF Modalità: 1mA
Controllo ON / OFF: PWM, 1520uS
Colori: Rosso / Bianco
The whole series does not work from any customers. I got also 3 units and none of them worked. The unit was connected to a receiver. A 3S battry provided the power via an 18A ESC. I have compared them with the ones I bought one or two years. The new ones do not have "Turnigy" logo and the quality is not as good as before. Not recommanded. I am the second now??? I mean the ICs are wrong soldered. The single LEDs are ok if you give power to the LEds itself.Good quality and inexpensive. Very bright. Works as advertised from a receiver channel, or in parallel with the KK2.1 buzzer Mine were both strobes, which I do not mind for that price.Good strobes for a good price! Alott sheaper then flytron's strobes. Doh i recomend getting the glass that flytrond has for the white strobe! Makes it super bright!! I allso do not recomed to jump any of the led's to make them constant. This will burn the led fast!!Bought this unit a while ago and have just fitted to my quadcopter so I can see which way is which.
Nice and bright and recommend highly.
Normal aircraft have green and red light continous and white strobes additionally. I don t know why they do it just vice versa here? Have to resolder the leds, hoping that this works becaus I would not like to resolder possible different rsistors, too. Will see. Otherwise good product.
Coloquei um desses no meu T-rex 500 ficou showBoth led are strobe, no solid white or red, not as advertised, therefor only four stars.
Led are bright and good visible by nightfall.
You can turn led on and off by external channel on your transmitter.Just like to say as you can see in the pic , wire connections C G (control, Live , Ground) are incorrect for JR. Just need to reverse red and black wire in plug, use 3 pins, lift all 3 locks up and pull wires out of plug, reverse them - easy. Nice strobe and all bright. I have only powered (4.8v) them up without receiver so I expect the white wire will control function via TX.Ausgezeichnet. Da frag ich mich dann schon wofr das viele Geld fr eine Scale Beleuchtungseinheit ausgeben. So geht das viel einfacher. Super hell und sauber verarbeitet. Preis / Leistung excelent.the white led is so bright that red led looks so dim