Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Vego GW320X Multi-rotore Kit Telaio

Generating Links

Vego GW320X Multi-rotore Kit Telaio

Prezzo:

Now save risparmia 0,00 € 0,00 €

60,91 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
697000002-0
Spedizione gratuita? Clicca qui per saperne di più!

Progettato e prodotto in Giappone, Vego cornici Multirotor sono tra i migliori che abbiamo mai visto in termini di qualità e finitura. Il taglio di carbonio e la finitura è a dir poco squisita, se si tratta di qualità si sta cercando per voi non saranno delusi con questo prodotto.

Il GW320X è fatto per la corsa o manovre 3D estreme. Si tratta di un forte, il design ben pensato frame "H". I bracci possono essere configurati per 30 o 45 gradi per soddisfare il vostro stile di volo.

Attestandosi a 152g il GW320X è un telaio estremamente leggero. Dato il peso leggero si potrebbe pensare che sia fragile, ma questo è un telaio completamente in fibra di carbonio dando grande resistenza e durata. I bracci sono realizzati in fibra di carbonio 4 millimetri multistrato con la cornice centrale in fibra di carbonio 2 millimetri. Le braccia sono abbastanza a lungo per consentire 5-6 "eliche per migliorare le prestazioni.

Il piatto telaio 30 millimetri centro lo rende ideale per il montaggio Naze, Nano o controllori di volo CC3D e tutti gli altri requisiti come la fotocamera FPV e trasmettitore, ricevitore e PDB. Il ponte superiore è disponibile in due sezioni che consente di avere uno flat decks o si potrebbe angolo di una piattaforma per una fotocamera di registrazione. c'è smorzamento delle vibrazioni sul ponte superiore.

Si tratta di una costruzione estremamente semplice. Quindi, è sufficiente aggiungere il cambio preferito e massimo fuori la forza per qualche volo veloce.

Caratteristiche:
• Progettato per la corsa o divertimento 3D
• I bracci possono essere cambiati tra i 30 ei 45 gradi
• Spessore 4.0mm durevoli, bracci in fibra di carbonio multistrato
• telaio in fibra di carbonio 2,0 millimetri Centro
• Progettato per 2204-2206 motori, montaggio 16 / 19m, foro di 3mm
• dimensioni dell'elica 5-6 "
• Dimensioni piastra meccanica è 30 millimetri può usare Naze, Nano, CC3D, ecc
• Il nome GW è pronunciato Go-Wan. E 'giapponese per braccio forte

Specifiche:
Materiale: telaio in fibra di carbonio
Passo: 320 millimetri (30/45 gradi formazione braccio)
Telaio Altezza: 36 millimetri
Telaio Peso: 152g
Fori Motor Mount Bolt: 16 / 19mm

Incluso:
Kit Telaio GW320X
borsa vite

richiesto:
4 x 2204-2206 motori
4 x 15-30A ESC
1 x 1000mAh 2200mAh-11.1-22.2V (3S-4S)
4 x 5-6 "Eliche
Il controllore di volo 1 x
1 x scheda di distribuzione
5-6 canali TX / RX

  • Vego GW320x GW250X Quad Frame
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Frank | Acquirente verificato

  • Overall
  • Quality
  • Value

Excellent frame - super quality

Apr 09, 2017

Don't know what the other reviewer was talking about when he said there were no holes in the baseplate for the FC. Of COURSE there are! In fact, I stacked my Omnibus F3 FC and 4 in 1 ESC on short nylon stand-offs, and with the included 25mm black stand offs and the 3mm thick arms, I had plenty of clearance between top and bottom plate. Don't build the way the photo shows!!! Build it to look like an Immersion Vortex 250 Pro and everything (rx included) can be between the two main decks, fully protected. No need for the two small plates unless you add GPS (why in this size frame??). With a set of EMAX 2600kv Race edition motors and 3 blade props this thing is HOT!!! Love the frame. Highly recommended.

eric | Acquirente verificato

  • Overall
  • Quality
  • Value

Great quality but not very practical

Feb 24, 2017

I was looking for something larger than a 250 size quad that I could mount a standard set up and GPS. The 320 size looked perfect for what I was looking for. When I un boxed this kit it looked very simple and nice quality, great! After assembling the frame I started to plan how each component will be placed and realized there are no holes on the base plate for the FC. There are 2 holes that are for two of the standoffs that are the same size as a standard FC but if using them, your FC will not be centered on the base plate. (look at the picture of the bottom plate and you will see what I mean) Therefore I had to drill holes in the plate myself, not a huge problem but a little time consuming and should be mentioned in the kit description. Also, there are no landing feet or pads included which you will need to get unless you're ok landing directly on the bottom base plate! And one last thing to consider is battery placement, on my set up the battery will have to be strapped to the bottom of the quad so I have to craft my own landing skids.

dtm360 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2016

Very nice quality carbon, Not the very best I have seen (I use to collect exotic RC cars - QVA!) but still pretty good!

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori