ViperJet Composite 70 millimetri FES - 1050 millimetri (ARF)

• Overall
• Quality
• Value

Customer Rated

Apr 22, 2013

Setup:
Wemotec mini fan HET 2W18
4 cell 4000mAh nanotech
Turnigy Brushless ESC 85A w/ 5A SBEC
Drawing 70 amps max.
Using 6x metal gear servo.
Weight app. 1.8 kg
This plane needs speed to keep flying.
So jumpstart with bungee. Fan motor are running smooth (low noise) but need to gain speed especially during turns to avoid stall.
Put flaps up slightly during landing. (have no landing gear)

• Overall
• Quality
• Value

Customer Rated

Mar 10, 2013

bought this recently fitted nav lights a bit dificult but worth it also fitting air retracts at press and a scale canopy will post photos

later and hopfully weather dependent a flight vid all in all looks

great already got people talking going to build a larger aircraft

next time more room

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2013

Bought this Viperjet recently and its not as good as i was hoping, all reviews i read had said this was a quality plane, for some reason mine does not fall into this category. The wings & tailplane are both excellent but the fuselage is fairly poor, the canopy would not fit without a lot of sanding to the fuz and a new hole drilled for the retaining pin at the front as this was miles off centre, the 2 inner intakes did not align up where the fan front sits and the overall finish is very lumpy.
Is mine just a bad one out of the batch??
If i was to be paying more for this kit i would have sent it back but due to its low price its still good value.

• Overall
• Quality
• Value

Customer Rated

Jan 18, 2013

Got one today from my new favorite warehouse NL ! Looks great for the money. But why is there no manual :)

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 28, 2012

aereomodello a primo impatto sembra bello ,ma nella fusoliera si notano tante imperfefioni , ho trovato i carelli posteriori differeti tra di loro

• Overall
• Quality
• Value

Customer Rated

Nov 03, 2012

Just arrived last night, no damage from shipping :) the fiberglass work is not is good on this one, things don't line up right. Elevator servo spot is in the wrong place, can't close canopy. Duct work doesn't terminate at 70mm it's off by 10mm in some places. I believe the vertical tail is not straight and the retract mount for the front is way off, tilted too one side . All in all not very good quality , I hope it flies .

• Overall
• Quality
• Value

Customer Rated

Oct 19, 2012

My Viper arrived today. It came double boxed and all parts arrived 100pcnt perfect.

The plane is built very well for the money. It has a very nice finish and all parts align and fit well.

I am 100pcnt happy with this plane and cant wait to start the build.

• Overall
• Quality
• Value

Customer Rated

Aug 31, 2012

I received the package very well, but I get less than I expected, the first servo mount for the elevators and rudder look at glue incorrectly, causing the canopy can not be closed when the servo was installed

Secondly, I get the wrong tire mount where I got were two iron for the front tire and just a tire iron to the back. as well as for some other items that do not fit. I have to spend extra energy to set up and customize. I hope next hobbyking notice

• Overall
• Quality
• Value

Customer Rated

Aug 18, 2012

Just inspected mine. All parts nicely made. Looks very pretty. I just bother myself wether this plumb duck will ever fly half decent. So the main task is to keep weight beyond 2000gr
Sorry 4 this, but less would be more in this case.

• Overall
• Quality
• Value

Customer Rated

Aug 14, 2012

Very beautiful plane, nice finish on the outside.
Only polyester shell but not to heavy if you;
-pull out all the wood in the nose,
-put the 3 servos for rudder an elevator in the stab and eliminate these long and heavy pushrods
-throw away these heavy, unbalanced and twisted wingtips,
-shorten as much ass possible the end of the thrust tube of the fuselage and align it to the rudder.
Motor setup: HET6904 & HET1W30 / TGY K-Force 100 / 4000mAh-4s-55c
Flying weight : 1kg900gr (with flaps installed but no weehls or retracts > on bungee)
Thrust :2kg100gr
REALLY FASSSSSSSST and endless vertical climbing !!!
Flies like on rails but becomes very quickly hard to see.
Only DANGER: if you pull to hard in a U-turn it has tendency to roll in the curve and fall in a very nasty tailspin!
Thats what happened to mine after a very nice flight; I immediately ordered a new one !!!!!!!! :-)