Walkera UFLYS Brushless Metal Edition 4 canali w / 2.4GHz 2402 spina trasmettitore & play
Precise lavorato CNC testa del rotore in metallo offre maggiore precisione di funzionamento.
struttura compatta 90oswashplate è adottato e facile da essere montato parti come servo vengono utilizzati.
motore brushless ad alte prestazioni alimentato da 7.4V 800mAh Lipo offre 10 ai tempo di volo di 12 minuti, a seconda della modalità di volo.
Nuova tecnologia 2.4G, con le funzioni di identificazione e del codice precisa l'associazione, può permettere di sopra 20 aeromobili a volare nello stesso campo e nello stesso tempo.
Rotore principale Diametro: 520 mm
Rotore di coda diametro: 145 mm
All-up Peso: 288g (batteria inclusa)
Lunghezza totale: 510 mm
Batteria: 7.4V 800mAh Li-Po
Brushless Motor: WK-WS-21-002
Servo: peso 9,1 g / velocità 0.12sec / 60 ° (4.8V) / coppia 1.1kgf.cm / dimensione 22.5 * 11.8 * 27mm
1 x Walkera HM UFLY elicottero corpo
1 x Walkera trasmettitore WK-2402 4CH 2.4G NUOVO!
1 x 800mAh batteria (7.4V Li-Polymer)
1 x Caricabatteria
Guida rapida e manuale in inglese
Capacità ( mAh )
This heli is fairly easy to fly once you have it setup correctly (it seems a little tail heavy). Getting another from HK with the TX (spare). Best price around.I brought one of these elseware, but HobbyKing price is the cheapest.I just received it today, its the same as SFflier, with the ufly box and the ufly canopy. it is the 2345 rx and i received it with a cracked canopy and lots of loose parts. dont try to attempt flying out of the box.I am buying uflys brushless ,but I what to have spare main blades,can not find them could you helpAll in all a pretty good heli after proper setup.
It is in fact a UflyS as it comes with a rx2435 receiver.
Don't be temped to fly this heli out of the box. I did and it crashed because one of the tail blade holders came loose from the tail rotor shaft during flight. After fixing the following points it flies great:
1. use loctite on the screws holding the tail blades holders to the tail rotor shaft
2. rearrange the elevator servo wire, mine waI just received mine and it is a 2435 RX. The box and canopy all have UFLY on them, but the RX is a UFLYS. I don't know if it's a rebox from the factory or that's the way they pack the UFLYS. I could have sworn I saw the UFLYS box and canopy and they both have UFLYS on them.OK Just to confirm for others, Mine turned up today in fine condidtion and is in fact the UflyS with 3 axis gyro (2535 RX). All in all well finished and does fly out of the box. A bit excessive on the loctite on a couple of screws and will benefit from going through it and checking the tightness of all fasteners. The price is pretty good so I'll let the loctite bit slide and give it 5 stars.
The 3 axis gyro setup works well and so long as you position the battery well forward it flys very nicely. The stock position makes it a touch tail heavy.SPECS WRONG!
Price Too High??
According to Walkera's website and others, AUW should be 288g not 768g. Other specs appear to be for Chinook too, not UFLY.
Price may be too high since this is the only Walkera heli, of the many that I checked, that is more expensive here than at other sites. This page needs a complete redo, HobbyKing, then please delete this review.