Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Tracker wireless di temperatura (104 ~ 230F)

Generating Links

Tracker wireless di temperatura (104 ~ 230F)

Prezzo:

Now save risparmia 0,00 € 0,00 €

35,62 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
Tem-Tracker
Spedizione gratuita? Clicca qui per saperne di più!
Preoccupato per la temperatura della batteria, ESC o motore?
Vuoi sapere come caldo per il gruppo è sempre in volo?
Ora è possibile, con il nostro nuovo inseguitore della batteria senza fili.
Il Tracker batteria senza fili è dotato di 3 sonde e può essere posizionato ovunque sul vostro aereo, in barca o in auto, per misurare e avvertire di eventuali aumenti di temperatura.

Spec.
Trasmettitore Peso: 7g
Ricevitore Peso: 32g (questa è la parte a tenere in tasca)
distanza di segnale: Intorno 300-400mtr
Minima: 40 ° C
Max Temp: 110C



Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

johnno | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2012

I purchased this unit to monitor temperatures of my motor and battery in my 1/10 touring car, it provides peace of mind when you are running close to the edge. I paired it up with the wireless battery monitor (also from hobby king) for a cheap telemetry system.

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 04, 2011

nice gadget very useful when not malfunction



cons:

-maximum transfer range app 15-20meters... ONLY!

probably came with flushed output stage of RX

(note: I did not turn it on without pulled antene)



as I read it probably works on 800mHz.. but interfeing with my 2,4Ghz rx/tx probably exact multiple of same frequency



wil not remember settings.. every time when turning on is neccesary to set max temperatures in order to start monitoring.



TX consumig 32,4mAh (0,0324Ah)

RX consuming from 50 to 100mAh (0,05-0,1Ah) depends on ow mny led lightning



summary: nice when not malfunction, too expensive and in my case almost unusable, microprocesor core of tx getting hot (mesured by infra temp... ~90C !!!





Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 27, 2010

It does work well. Receiver works with 4.8 V up to 7.4 V. Transmitter works with 7.4V (3 pins of the balancing plug of a LIPO 2S or 3S connected) or 11.1V (all 4 pins of a LIPO 3S connected). Because it has 6 pins, I SUPPOSE that will work with a LIPO 4S or 5S (I did not test this voltage). With the transmitter facing up(that is, in such a way you can read "T1, T2,T3", connect keepping the positive wire at your right. Manual is very poor.

Gerben | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 27, 2010

Nice piece of kit when pushing equipment to the limit, or avoiding doing so.

Measure temperature on 3 channels, f.i. motor, speedcontrol and lipo. Each channel has it's own adjustable alarm limit, just be sure to set this up or the device will not work!

Receiver battery bay is 29x32x10mm, fits 2s Zippy 240mah (need one of those red bec connectors to hook it up). Transmitter can be plugged into balance connector on lipo.

JETPILOTRICH | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 23, 2010

cant wait to try it if I ever get it... have been waiting 5 weeks for the order which is being held up because the motor i ordered is out of stock!

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 18, 2009

perfect I use is to monitor home wood boiler

just need a battery that is hard to find if you want to fit it in the case (100 mAh) so $ stars only

you will get approx one hour worktime on battery

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2009

It works, need a 6v battery for receiver. The gauge isn't very sensible and don't detect quickly temperature elevation, but it's very reasonable and useful! The signal distance I found max 10-15 mt.lost signal

Better if there was also included receiver battery!

and better manual or instruction

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 22, 2009

Hello,i buy this item and it haven't battery.The problem is i can't find this type battery.The celler do not nothing for this

sailr | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 16, 2009

I received this item and the instructions say "install the 2S lipo battery". WHAT battery? I didn't receive any battery. Furthermore, there is a very small space for the battery. What size battery do I need?

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 17, 2009

Save your motor from burning up.

  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!