Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Sponson legno Boat Race Kit (495 millimetri)

Generating Links

Sponson legno Boat Race Kit (495 millimetri)

Prezzo:

Now save risparmia 0,00 € 0,00 €

21,32 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
099000008
Spedizione gratuita? Clicca qui per saperne di più!

Questa barca gara in stile classico è costruito in compensato laminato e ben rifinito. Ha due pannelli removibili portello di accesso che rendono l'elettronica e le batterie scambiano un gioco da ragazzi. Dispone anche, supporti braccio sponson in fibra di carbonio estremamente rigidi leggeri.

Questa barca è in kit, il che significa che sarà necessario aggiungere il proprio hardware, come il timone, albero di trasmissione / monte, l'elica e l'elettronica.

* Nota: Sopra le foto del modello assemblato sono solo per riferimento. Questa versione dovrà essere assemblato e arriva in forma confezione piatta come mostrato in ultima foto. Per la versione pre-assemblato, vedere elementi correlati qui sotto.


Attrezzatura consigliata

Albero di trasmissione: 3,17 millimetri
Timone: 75mm
Elica: 1.4x27
Motore: raffreddato ad acqua 28 millimetri 3700kv
ESC: Watercooled 40A +
Servo: 9g x 1
Batteria: LiPoly 3S 2200mAh
Sistema radio: 2CH

Specifiche:
Materiale: compensato laminato
Hull Lunghezza: 495 millimetri
Larghezza: 380 millimetri
Altezza: 60mm
Hull Peso: 230g

  • Sponson Race Boat
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

JASON | Acquirente verificato

  • Overall
  • Quality
  • Value

exelent kit well made top price

Nov 06, 2016

excellent kit assembled really well i fitted mine up with an f1 outboard top value for monies will bye another one

darkvaderz | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2015

kit arrived with missing laser cut board! In process for RMA but I dont thing HK will sent only the missing part! I will have to sent back the item to HB!! less trouble to buy wood and make that missing part!

David | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 25, 2014

My kit arrived with missing laser cut board,tried for several weeks to have this resolved with hobbyking,but had to use paypal for refund,cannot build boat so gave up.

steamboatbob | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 01, 2014

Just my own opinion but the kit I received on looks seemed to be a very average cut kit there were burn marks all over the ply. the actual kit goes together very nicely but I would recommend a few things. The ply has been badly laminated enough that some of the parts are very weak (top section and covers)
First and foremost throw out the carbon tubing it is of very low quality put steel or brass tubes in that protrude slightly from the sponsons and main hull and use carbon rod that fits into the tubing use small clips to hold it in.
do not use CA glue to put a ply kit together use a pva and seal with a good epoxy resin.

I wont go into the hardware selection just yet but I will do a build diary on the forum when im done

jim | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2013

Part 1
Well upon opening the box I was very impressed with cut quality and overall quality of the plywood. Some of the laser work needed an xacto to pop free though, but fit and finish seems to be dead on. Ill post another review once I finish the build with all my hardware used and tuning tips.

Sam | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 21, 2013

nice kit
fun to build and very simple to build
i will keep you posted to how it goes and what i end up running in the boat in the way of hard wear
i will buy another kit as a 2nd boat

Basstronics2 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 23, 2012

Hey Hobby King, we want a STRUT for this hull. Nobody can do much with all these hulls without the hardware!

2mm ply except tub sides which are 2.3mm. The design is heavy. No foam cores for the sponsons. Sponsons are permanently attached with current design. Design will make it difficult to make sponsons removable. Holes already in transom- bad thing when you cant get the right strut!

I would like to build 3-4 of these in total to encourage others to boat in my area.

File dei clienti
Моя ГИДРА Download [5640]
Вид спереди Download [5603]
Strut dims 2 Download [60]
The build1 Download [98]
transom setup1 Download [107]
transom setup2 Download [116]
tub setup1 Download [106]
fresh paint1 Download [1365]
fresh paint2 Download [1340]
fresh paint3 Download [896]
  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori