New Items Notizie Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

X8F 2.4ghz Futaba Modulo

X8F 2.4ghz Futaba Modulo

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
X8F
WANT FREE SHIPPING? Click here to find out more!

Il tempo per l'aggiornamento è ora.
Il modulo 2.4ghz X8 per Futaba consente al trasmettitore compatibile PPM per entrare nella nuova era di trasmettitori radio.

Compatibile sia con la X8R e ricevitori X8Rp.

Come funziona?
Il modulo X8 comunica con un ricevitore X8 tramite lo spettro a 2,4 GHz, offrendo le prestazioni senza precedenti utente e problema tecnico affidabilità libera mai visto prima in R / C FM / AM sistemi basati.
Una volta acceso, il X8 cerca un canale libero prima di bloccare il legame e con il ricevitore. Questo processo di associazione è reso sicuro da ogni modulo unico di identificazione globale e per evitare le collisioni, per un controllo completo e la sicurezza.

Funzionerà con il mio trasmettitore?
Il modulo Futaba è stato testato sui seguenti trasmettitori;
7U, 8U, 8J, 9Z, FN e tutte le variazioni di sintesi.
Questo funziona anche con l'ottica 6FM Hitec

Caratteristiche principali
Modulo Futaba Assan X8-F.
-Altamente Sicuro e robusto collegamento
cristalli -No o canali necessari
-No Interferance da motori, accensioni o di metallo per l'attrito di metallo.
-Plugs Direttamente nella vostra radio esistente
antenna Short
-Non C'è bisogno di modificare le impostazioni della radio.

Dimensione
60x37x21mm / 2.36x1.46x.83inch

  • SKU X8F
  • Brand -
  • Capacità ( mAh ) -
  • Peso 65.0000
  • Lunghezza 121.00
  • Packaging Width 36.00
  • Altezza 91.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Im using 3 months an Assan X8F module on a MPX 3030 transmitter, connectet via L/S Port! It works perfect, Easy Glider, Omei, Sprinter, Simprop Selection, Fun Jet with 700 Watts and more models flying perfect! I use now 6 X8R7 Receivers, no glitches, no problem with binding, a perfekt solution!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im using 3 months an Assan X8F module on a MPX 3030 transmitter, connectet via L/S Port! It works perfect, Easy Glider, Omei, Sprinter, Simprop Selection, Fun Jet with 700 Watts and more models flying perfect! I use now 6 X8R7 Receivers, no glitches, no problem with binding, a perfekt solution!!!

Zu Begin der Indoor-Flugzeit, habe ich meiner EVO9 das X8F gegnnt. Da ich nicht immer den Trainerport Stecker abziehen will, habe ich mir einen Umschalter gebastelt, um zwischen 35MHz und 2,4GHz zu whlen.

Ansonsten hab ich das Modul nach http://www.drivecalc.de/circuits/Assan_picsd.html angeschlossen. Das Binden geht super einfach, ich bin total berrascht.

Meine Empfehlung: Bedenkenlos kaufen!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Zu Begin der Indoor-Flugzeit, habe ich meiner EVO9 das X8F gegnnt. Da ich nicht immer den Trainerport Stecker abziehen will, habe ich mir einen Umschalter gebastelt, um zwischen 35MHz und 2,4GHz zu whlen.

Ansonsten hab ich das Modul nach http://www.drivecalc.de/circuits/Assan_picsd.html angeschlossen. Das Binden geht super einfach, ich bin total berrascht.

Meine Empfehlung: Bedenkenlos kaufen!!

Tom would you send me a e-mail I am in Indiana also and trying to get information for my 9C to change it to 2.4 thanks rthalls1@verizon.net

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tom would you send me a e-mail I am in Indiana also and trying to get information for my 9C to change it to 2.4 thanks rthalls1@verizon.net

Its unbelievable. I bought optic 6 before a few month on 35 Mhz. Im amateur and really beginner. :) Upgrade for an 2.4 GHz and was question of 1 minute. paring with receivers with studing of manual another 3 minutes and no more problems with crystals and other stupid double mixing problems. My glider flying 250 meter high and no problems with signal. I love HC because price for upgrade was terrible low. Thanks HC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its unbelievable. I bought optic 6 before a few month on 35 Mhz. Im amateur and really beginner. :) Upgrade for an 2.4 GHz and was question of 1 minute. paring with receivers with studing of manual another 3 minutes and no more problems with crystals and other stupid double mixing problems. My glider flying 250 meter high and no problems with signal. I love HC because price for upgrade was terrible low. Thanks HC

excellent form fully advised, it works well interference zero

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent form fully advised, it works well interference zero

I have tested the X8F 2.4ghz Futaba module and the X8Rp2.4 ghz receiver on a Futaba FP-T8UP transmiter . The plane was a Sebart Katana 30E. It works fine. They are not problem with the trims and the range is sufficient for a multi -plane with this receiver without external antenna.

The transmiter module works also on my FC28 transmiter.

Thanks to Hobbycity for this good material.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have tested the X8F 2.4ghz Futaba module and the X8Rp2.4 ghz receiver on a Futaba FP-T8UP transmiter . The plane was a Sebart Katana 30E. It works fine. They are not problem with the trims and the range is sufficient for a multi -plane with this receiver without external antenna.

The transmiter module works also on my FC28 transmiter.

Thanks to Hobbycity for this good material.

Super! I use Optic6. It works very good. The range ist enough.. about 300 m. One of teh best function is failsafe! I turn on my transmitter trottle 0 position. And After the landing I turn off my transmitter. No more risk with Prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super! I use Optic6. It works very good. The range ist enough.. about 300 m. One of teh best function is failsafe! I turn on my transmitter trottle 0 position. And After the landing I turn off my transmitter. No more risk with Prop.

To be honest, I've had doubts whether this device will work with my MPX Royal EVO 12. But it did!

I started testing with a Gemini and I was surprised how well it worked. Next thing I tried a EasyGlider and let it go as far as I could see it - again no problem at all.



Surely this was not my last unit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To be honest, I've had doubts whether this device will work with my MPX Royal EVO 12. But it did!

I started testing with a Gemini and I was surprised how well it worked. Next thing I tried a EasyGlider and let it go as far as I could see it - again no problem at all.



Surely this was not my last unit.

Hello,

I tested ASSAN module in Hitec Optic 6 and result is outstanding.Binding is faster then other brands.

I do test range on ground and air with mini series receiver(6 and 7 chanel)and I have on ground 800 meters without range out.Amaizing!

Great job UH!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello,

I tested ASSAN module in Hitec Optic 6 and result is outstanding.Binding is faster then other brands.

I do test range on ground and air with mini series receiver(6 and 7 chanel)and I have on ground 800 meters without range out.Amaizing!

Great job UH!

So..ik have the X8F today and one houre later he doesn't work anymore.

No lamps on de X8F are working anymore, he don't give any signal.

the first 3 times he works well after the fourth time hey doesn't respong anymore on my FF9 CHP.

What can be the problem????

I remove and replace him several times but nothing happens, i make the contact in my tranmitter a little bit moving for better contacts with the X8F 2.4 Ghz.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So..ik have the X8F today and one houre later he doesn't work anymore.

No lamps on de X8F are working anymore, he don't give any signal.

the first 3 times he works well after the fourth time hey doesn't respong anymore on my FF9 CHP.

What can be the problem????

I remove and replace him several times but nothing happens, i make the contact in my tranmitter a little bit moving for better contacts with the X8F 2.4 Ghz.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking