Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • USA

XK3650-B-5250KV Brushless Inrunner (8.5T)

XK3650-B-5250KV Brushless Inrunner (8.5T)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
248 g
SKU:
XK3650-B-5400
Descrizione
prodotto

XK3650-B-5250KV Brushless Inrunner

Specifiche.
# Di poli: 4
Max Amps: 115A
Max Volt: 7.4V
Max Watt: 850W
Rpm / V: 5250kv (8.5T)
Resistenza: 0,0052 ohm
A vuoto Corrente: 5.5A
Dimensioni: 36,0 millimetri x 50,0 millimetri
Montaggio profondità del foro: 4,5 millimetri
Lunghezza di estendere Shaft: 15mm
Diametro albero: 3,175 millimetri
Peso: 191g

Product
Specifications

Ulteriori informazioni

  • SKU:
    XK3650-B-5400
  • Brand:
    N/A
  • Peso (g)
    248.00
  • Lunghezza
    130.00
  • Larghezza:
    50.00
  • Altezza:
    78.00
  • Kv ( rpm / v )
    5250.00
  • Correnti Max (A)
    115.00
  • Potenza ( W ):
    850.00
  • Lunghezza B ( mm ):
    50.00
  • Can Lunghezza D ( mm )
    48.00
  • Max Tensione (V )
    7.00
  • Albero A ( mm ):
    3.18
  • Unit Weight (g):
    185
  • Diametro C ( mm )
    36.00
  • Lunghezza totale E ( mm )
    66.00
  • Resistenza ( mh ):
    50.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Super easy to use and very good for bashing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor wp sc8 120a esc,13t pinion on my trooper sct,runs cool & plenty powerful,best buy for the price
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My 3kg in working order 4x4 1/10 run cool at 50 km/h and can makes wheelies between 0 to 50. I run with 150a xerun esc with ubec and 5200 30c 2s lipos
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Never received motor had to open paypal claim to get money back hk never replayed to my emails what a joke customer service
think twice before you buy anything here
in the end paypal refund me my money as u see hk did not want to do that! !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i run it on a eguana quatum 2WD 1/10th, with a 60 esc and a 13teeth motor pignon my speed is fair enouth for an offroad, the motor stay cold after 30 min of drive i know i can get it highter but for my use and my environnement it will be useless
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have run this motor in one of my Troopers for a while now. Its efficient on 2s lipo's. The 4 pole power is amazing. Way more than needed for off road, but it's there when you want it. Plenty of grunt down low and top end is FAST on stock Trooper gearing, which has held up well. I pulled all 3 diffs out last week to upgrade from grease to diff oil and saw minimal wear. Went with 5k, 7,k, 3k in front, center, rear, respectively. I have to be careful with my throttle input to keep it on the track. I'd recommend a good 2s lipo with a c rating of at least 40c and 5000mah to supply enough juice for this motor. 120a x-car esc is running good. For $18 its a steal if they ever get them back in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ran this motor exactly 1 time for no longer than 15 minutes at a local track made for 1/10 cars. I was running this motor in a slash 4x4 with stock gearing. Was running fine until it slowed way down, put on work bench and the tires would not spin. Backed motor off spur gear and wheels spun. Pulled motor to inspect and found it siezed. Due to this motor being shipped from China and it being only $20 I decided to take in apart. Magnet debonded from the rotor. Motor temp was never above 130F. Maybe I just got a bad one but I would not recommend this motor for slash owners.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good combination with HK100A ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought to replace the turnigy 7900kv motor. This one is quiet, smoother and much more powerful. It's longer internally than the sensored 7900. Runs much cooler too and is actually a much better motor. Can be geared to be just as fast as the 7900kv, which is a very hot motor even at a 16T pinion. This one runs a 23T no problem and can go higher.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Brushless Motor, moor power, my Cyclone flying....
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.