New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

XT60 per 3 X 3,5 millimetri proiettile Multistar ESC Breakout cavo di alimentazione

XT60 per 3 X 3,5 millimetri proiettile Multistar ESC Breakout cavo di alimentazione

Discontinued Product

Please continue searching for a similar product.
Peso:
26 g
SKU:
015000094
WANT FREE SHIPPING? Click here to find out more!

Progettato per l'utilizzo con il nostro Multistar 15 amp esc, questo cavo semplifica la costruzione del sistema di potere Tricopter consentendo di collegare semplicemente il sistema insieme - stile Plug and play e con saldatura a zero!

Questo cavo viene pre terminato con un ingresso batteria XT60 e termina in 3 coppie di connettori da 3,5 mm oro femminile. Il cablaggio è in silicone isolamento 14 AWG - frazionamento in 18 AWG.

Si prega di vedere gli oggetti correlati qui sotto per costruire un intero plug and play sistema di potere!

Specifiche:
Ingresso della batteria tramite: XT60 femminile
Uscita Esc via: 3.5mm dell'oro del connettore
Esc Quantità: 3
Sezione del filo: 14/18 AWG
Lunghezza: 220 millimetri
Peso: 21 grammi

  • SKU 015000094
  • Brand MultiStar
  • Capacità ( mAh ) -
  • Peso (g) 26.00
  • Lunghezza 125.00
  • Larghezza 10.00
  • Altezza 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10]

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10]

I am running two 10amp esc's and a 5amp bec off this with a 2s 1300mAh lipo. The connections are solid and well insulated.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am running two 10amp esc's and a 5amp bec off this with a 2s 1300mAh lipo. The connections are solid and well insulated.

Great for most tri copters. For people who would rather pay a dollar for a soldering job than soldering yourself.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for most tri copters. For people who would rather pay a dollar for a soldering job than soldering yourself.

GO FDISOVCIJXKCJ TJEKOQRHGIOUYHE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GO FDISOVCIJXKCJ TJEKOQRHGIOUYHE

This is the best! I could only find PDBs or 4plus harnesses, so when i saw this It was a no brainer, is worging great, I just removed the XT-60 in order to put on a BEC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the best! I could only find PDBs or 4plus harnesses, so when i saw this It was a no brainer, is worging great, I just removed the XT-60 in order to put on a BEC.

Everyone who builds tricopter, wants to have it nice and clean, and doesn't have time for soldering, must have one of these!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Everyone who builds tricopter, wants to have it nice and clean, and doesn't have time for soldering, must have one of these!

It's a good product. I like it. It works as it should be.

Two thumbs up. I would like to recommend it to all user.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a good product. I like it. It works as it should be.

Two thumbs up. I would like to recommend it to all user.

Good power distribution cable if you dont have a PDB of some sort!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good power distribution cable if you dont have a PDB of some sort!

Designed for use with our Multistar 15 amp esc, this cable simplifies the construction of your Tricopter power system by allowing you to simply plug the system together - Plug and play style and with zero soldering!

This cable comes pre terminated with an XT60 battery input and terminates in 3 pairs of 3.5mm female gold connectors. Wiring is silicone insulated 14 Awg - splitting into 18 Awg.

Please see the related items below to build an entire plug and play power system!

Specs:

Battery Input via: XT60 Female

Esc output via: 3.5mm Gold Connector

Esc Quantity: 3

Wire Gauge: 14/18 AWG

Length: 220mm

Weight: 21 grams

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Designed for use with our Multistar 15 amp esc, this cable simplifies the construction of your Tricopter power system by allowing you to simply plug the system together - Plug and play style and with zero soldering!

This cable comes pre terminated with an XT60 battery input and terminates in 3 pairs of 3.5mm female gold connectors. Wiring is silicone insulated 14 Awg - splitting into 18 Awg.

Please see the related items below to build an entire plug and play power system!

Specs:

Battery Input via: XT60 Female

Esc output via: 3.5mm Gold Connector

Esc Quantity: 3

Wire Gauge: 14/18 AWG

Length: 220mm

Weight: 21 grams

Thin wires I will test it in my Tricopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Thin wires I will test it in my Tricopter

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!