Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Yak 54 1.5m Monster 3D V2 EPO (PNF)

Yak 54 1.5m Monster 3D V2 EPO (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
5479 g
SKU:
Yak54_59in
Descrizione
prodotto
Il YAK54 comprende una grande cassa rotante 37 serie e 60A ESC. Con un'apertura alare di 1,5 milioni e una superficie di 43dm2, si tratta di un enorme Foamie 3D che è sicuro di colpire!
Il YAK54 include molti dettagli di qualità come linee rotonde e rivetti, della cabina di guida e pilota, un ascensore servo doppia controllata (proprio come in scala gigante), grande scala servo è per ogni alettone e un outrunner appesa grande potente prop. L'ala principale comprende una grande trave di carbonio, e bulloni insieme ermeticamente pur essendo facile da rimuovere per il trasporto. Gli slot di coda insieme in 3 pezzi con due bulloni e resina epossidica per una tenuta extra forte tanto necessaria. Il cappuccio e il dettaglio del motore sono stampati in poliuretano (nessun gelato contenitore cappuccio qui).
Non avete mai visto un modello foamie di queste dimensioni e di dettaglio prima. È enorme!
Avrete bisogno di un pacchetto 3300mAh 4S per volare bene questo modello.
Spec.
Apertura alare: 1.500 millimetri (59in)
Lunghezza: 1.210 millimetri (47.6in)
Superficie alare: 43.9dm2
Carico alare: 50.1g / dm2
Peso di volo: 2200g
Motore: 3720 Brushless Outrunner 800kv
ESC: 60A
Batteria: 3300mAh 14.8V 4S lipo (non incluso)
Elica: 14x7
Servi: 17g x 5
Canali: 4 o 6 con ail / alt su ogni 2channel
richiesto:
TX e RX
3300mAh 14.8V 4S Lipo
Product
Specifications

Ulteriori informazioni

  • SKU:
    Yak54_59in
  • Brand:
    No
  • Peso (g)
    5479.00
  • Lunghezza
    970.00
  • Larghezza:
    310.00
  • Altezza:
    435.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Apesar de no ser um avio com preo muito acessvel, um belo avio, montagem muito fcil, tudo j vem pr instalado, vai precisar colar apenas a parte de baixo da cauda (leme e estabilizador horizontal so encaixados e parafusados!) alm de alguns detalhes externos que so colados tambm.
O avio muito bem desenhado, a asa encaixada com uma longarina de carbono e parafusada. Pode ser facilmente retirada para transporte, cabendo em um carro pequeno.
Todas as ferramentas necessrias so enviadas no conjunto, que vem at com a cola.
S plugar a bateria e o meu receptor do radio e voar!
Fiquei muito satisfeito com a compra, foi uma excelente escolha!
Recomendo a todos este Yak 54!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this as a cheap alternative to the Eflite Carbon-Z yak. I wanted a smallish electric to practice maneuvers I could carry over to my 30cc model. I watched the video and, as I had two 4S 3300mA 65C lipo's, ordered it from the Aus warehouse.

Pros
The model arrived about 3 days after the order was placed and was well packed. It took less than an hour to assembly. The overall layout is good with pin type hinges on all surfaces and nice horns and pushrods.
Cons
The paintwork is not the best. Lots of overspray especially on the canopy.
I feel the U/C is too far back as it is very easy for the model to tip onto its nose.
I installed a Spektrum 6Ch rx and the best place was in the space under the rear pilot's seat. I had to add an extension to the throttle lead.
The instructions are not exactly correct for this model, but are sufficient.
The horns are well made, but some of the cap screws supplied were too long and therefore I could not tighten the horns sufficiently. I only had to cut approximately 2mm off the bolts for the elevators.
The bolt supplied for the rudder was too short although it was the length suggested in the manual.
The cockpit finish was not fully complete with white foam showing in many places.
When the cockpit is installed, there is a gap of approximately 3mm between it and the cowling.
Paint on the canopy glazing chips off easily.

Ok, so I have noted a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello,

Very Excellent if you change the engine and put a Turnigy G46 Brushless motor instead of the one delivered wich is a little bit too small... Be carefull I had a bad surprised about the mounting of servos. One of the elevator servo was put at the place of the rudder command. So the elevator servos were not running at the same speed.

Regards.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Die Yak fliegt nicht schlecht. Der Flugregeler taugt nichts und muss auf jeden Fall ausgetauscht werden, ,der Motor wird sehr hei und ist berfordert. Da die Yak stark schwanzlastig ist, fliege ich einen 4000mAh 4s lipo und habe um den Schwerpunkt einzuhalten noch ca. 100gr. Blei in der Nase verklebt.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchase one of these beauties last year from the International warehouse. It is large, and floats in the sky. I am not a seasoned acrobat pilot but will tell you this giant bird will hover easily and around 1/2 to 2/3 throttle with the stock setup. I found that the stock speed control was a little weak for the provided prop, so I went to a one inch smaller prop and was still able to perform enjoyable flights. This plane will litteraly fly on 1/4 throttle gracefully. I used the nano 4S 3300 Lipo with no problems what so ever. If you want to fly 3D, I would consider an 80amp speed control to avoid in flight failures.
Signed,
One happy flyer
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi every one i have this model for 1 year now i must did 15 flights with it but i checked everything before the maiden flight i even greesed the motor bearings becouse the motor was very stiff.It flies well but not for executing extreem 3d for example hovering.Landing gears not very strong so if you are not very soft at landing you will damage your prop so order some extra to have for spare(i tried 14x8 wooden turnigy electric prop).
A 4s4000mA batery will give you a 5-6 min in the air safe flight whith this setup(everything stock)
if you want to strengthen your landing gear tie a small steel wire from the left landing gear to the right.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought the "bird" only.. No Electronics. Read Reviews

Put in a Turnigy Power 46 670kv, an APC 14x10 prop (the white flexible prop could not hold Vertical), a Turnigy 5000 5S battery, a Turnigy yellow (gold) 6 Channel receiver with Satellite receiver, a Turnigy 2S Receiver battery. Smart-Fly Sport using 1 battery in order to have Voltage regulation to Receiver. ( Could use a Turnigy 5A SBEC, but didn't have one in my parts bin) Had an 80A Turnigy ESC, but it was D.O.A. from HK, so put in my 75A CC. Cut the Center Red Wire in this setup. ( Could use a Turnigy Plush 60A ESC but I didn't have one on hand )





She stands ON PROP.!!!! Thrust is quite well!!!. Sounds and acts like a Bigger bird. She is HEAVY the way I loaded it. 7lbs !!!



Doesn't matter, the motor pulls it out of site vertically in no time flat.



NOTES on Construction::

Foamie radials reinforced with Epoxy at every place it contacts inside of Cowl. I also had a friend laser-cut a duplicate radial out of plywood and I glued it to the back of the foamie radial.. Nice and firm.



Cut notch underneath the inside of Canopy and battery well in order to put 5S 5000 battery in and run Heavy guage wires out bottom for a "motor plug". Lets me put in a plug on field when I am ready to ignite motor. SAFETY FOLKS !!



Rear wheel too flimsy for the 7 lbs...replace with Sullivan 10-20lb bird landing wheel.



Wi
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane. Well made. ALthough: Motor burnt, landing gear too weak. But: beautiful knife flights, slow to land, great look.

@HK: the landing gear is weak and too far behind. Have a look at other Yak54 models. The gear is always a little bit closer to the front. I will move it there and test it soon.

However: big fun for small money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great 3D ship ! Do away with the gammy foamie wheel spats ( waste of effort and time ! ) Re-glue the U/C legs-ply mounting board its uses that rubber glue so epoxy this as a matter of priority.

CoG is way aft so you will need a fair whack of lead up front.

Go to YouTube and search chinook969 to check my various posts in this Yak 54 ! Cheers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is awesome. Flies great 3d and precision. Check out my video:
http://www.youtube.com/watch?v=HM2wh9F4zZY
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Yak 54 1.5m Monster 3D V2 EPO

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

file di clienti
MANUAL Scaricare ora [12.64Mb]

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.